WaratekVRT Sign in

Oracle Critical Patch Update April 2026

Released April 2026 · Oracle's advisory ↗ · ← Critical Patch Update, January 2026 · Security Patch Update, May 2026 →

421 CVEs in this release, one square each

Protected by Waratek, exploitedProtected by Waratek, exploitedProtected by WaratekProtected by WaratekProtected by WaratekProtected by WaratekProtected by WaratekProtected by WaratekProtected by WaratekProtected by WaratekProtected by WaratekProtected by WaratekProtected by WaratekProtected by WaratekProtected by WaratekProtected by WaratekMitigation candidate, exploitedMitigation candidate, exploitedMitigation candidate, exploitedMitigation candidateNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedNo exploit publishedOutside Waratek scopeOutside Waratek scopeOutside Waratek scopeOutside Waratek scopeOutside Waratek scopeOutside Waratek scopeNot applicable, exploitedNot applicable, exploitedNot applicable, exploitedNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicable
Share this chart Oracle Critical Patch Update April 2026, one square per CVE: 174 Java CVEs, 16 protected by Waratek, 8 exploited, 247 other CVEs in this release.

Download the image

By status

No exploit published. For 51 of them, Oracle's security advisory is the source of public detail.

Protected by Waratek. Waratek RASP can block exploitation of these on systems that have not applied the patch yet.

Reset
More filters (1)
Columns
Including CVEs outside Waratek scope✕Published to 2026-03-31✕
Overview 150 matches · 55 in Waratek scope · 7 protected · 3 exploited · 0 CISA KEV · 5 public PoC · 5 EPSS ≥ 0.5
split by peak 67 / quarter
Not applicable: 93Outside Waratek scope: 2No exploit published: 47Mitigation candidate: 1Protected by Waratek: 7 High: 150 not blocked: 143blocked by ARMR today: 7 No public exploit: 121Forecast only: 2Proof of concept only: 22Working exploit published: 2Exploited: 3
Q1 211 No exploit published1 High1 not blocked1 No public exploit1 Q2 210 Q3 210 Q4 210 Q1 222 Protected by Waratek2 High2 blocked by ARMR today2 Forecast only2 Q2 221 No exploit published1 High1 not blocked1 No public exploit1 Q3 222 No exploit published2 High2 not blocked2 No public exploit2 Q4 223 No exploit published3 High3 not blocked3 Proof of concept only2 No public exploit1 Q1 232 Protected by Waratek1 No exploit published1 High2 blocked by ARMR today1 not blocked1 Exploited1 Proof of concept only1 Q2 232 No exploit published2 High2 not blocked2 Proof of concept only1 No public exploit1 Q3 232 No exploit published2 High2 not blocked2 No public exploit2 Q4 230 Q1 241 No exploit published1 High1 not blocked1 No public exploit1 Q2 244 No exploit published3 Not applicable1 High4 not blocked4 No public exploit4 Q3 244 No exploit published3 Not applicable1 High4 not blocked4 Exploited1 No public exploit3 Q4 240 Q1 256 No exploit published2 Not applicable4 High6 not blocked6 Proof of concept only3 No public exploit3 Q2 2513 Protected by Waratek1 Mitigation candidate1 No exploit published7 Not applicable4 High13 blocked by ARMR today1 not blocked12 Exploited1 Proof of concept only1 No public exploit11 Q3 2517 No exploit published4 Not applicable13 High17 not blocked17 Working exploit published2 Proof of concept only2 No public exploit13 Q4 2523 No exploit published7 Not applicable16 High23 not blocked23 Proof of concept only4 No public exploit19 Q1 2667 Protected by Waratek3 No exploit published8 Outside Waratek scope2 Not applicable54 High67 blocked by ARMR today3 not blocked64 Proof of concept only8 No public exploit59
Q1 21Q3 21Q1 22Q3 22Q1 23Q3 23Q1 24Q3 24Q1 25Q3 25Q1 26
150 matches Sign in to download these CVEs as CSV or JSON, or to follow them in a feed. ‹ prev page 1 of 2 next ›
CVE Severity Published▾ Status Exploitation Description
CVE-2026-33870 High 2026-03-27 No exploit published Proof of concept only Netty is an asynchronous, event-driven network application framework. In versions prior to 4.1.132.Final and 4.2.10.Final, Netty incorrectly parses quoted strings in HTTP/1.1 chunked transfer encoding extension values, enabling request smuggling attacks. Versions 4.1.132.Final and 4.2.10.Final fix the issue.
CVE-2026-33013 High 2026-03-20 No exploit published Proof of concept only Micronaut Framework is a JVM-based full stack Java framework designed for building modular, easily testable JVM applications. Versions prior to both 4.10.16 and 3.10.5 do not correctly handle descending array index order during form-urlencoded body binding in theJsonBeanPropertyBinder::expandArrayToThreshold, which allows remote attackers to cause a DoS (non-terminating loop, CPU exhaustion, and OutOfMemoryError) via crafted indexed form parameters (e.g., authors[1].name followed by authors[0].name). This issue has been fixed in versions 4.10.16 and 3.10.5.
CVE-2026-30931 High 2026-03-10 Not applicable No public exploit ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-16, a heap-based buffer overflow in the UHDR encoder can happen due to truncation of a value and it would allow an out of bounds write. This vulnerability is fixed in 7.1.2-16.
CVE-2026-30929 High 2026-03-10 Not applicable No public exploit ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-16 and 6.9.13-41, MagnifyImage uses a fixed-size stack buffer. When using a specific image it is possible to overflow this buffer and corrupt the stack. This vulnerability is fixed in 7.1.2-16 and 6.9.13-41.
CVE-2026-30883 High 2026-03-10 Not applicable No public exploit ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-16 and 6.9.13-41, an extremely large image profile could result in a heap overflow when encoding a PNG image. This vulnerability is fixed in 7.1.2-16 and 6.9.13-41.
CVE-2026-28693 High 2026-03-10 Not applicable No public exploit ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-16 and 6.9.13-41, an integer overflow in DIB coder can result in out of bounds read or write. This vulnerability is fixed in 7.1.2-16 and 6.9.13-41.
CVE-2026-28691 High 2026-03-10 Not applicable No public exploit ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-16 and 6.9.13-41, an uninitialized pointer dereference vulnerability exists in the JBIG decoder due to a missing check. This vulnerability is fixed in 7.1.2-16 and 6.9.13-41.
CVE-2026-28494 High 2026-03-10 Not applicable No public exploit ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-16 and 6.9.13-41, a stack buffer overflow exists in ImageMagick's morphology kernel parsing functions. User-controlled kernel strings exceeding a buffer are copied into fixed-size stack buffers via memcpy without bounds checking, resulting in stack corruption. This vulnerability is fixed in 7.1.2-16 and 6.9.13-41.
CVE-2026-3288 High 2026-03-09 Not applicable Proof of concept only A security issue was discovered in ingress-nginx where the `nginx.ingress.kubernetes.io/rewrite-target` Ingress annotation can be used to inject configuration into nginx. This can lead to arbitrary code execution in the context of the ingress-nginx controller, and disclosure of Secrets accessible to the controller. (Note that in the default installation, the controller can access all Secrets cluster-wide.)
CVE-2026-27830 High 2026-02-26 Protected by Waratek No public exploit c3p0, a JDBC Connection pooling library, is vulnerable to attack via maliciously crafted Java-serialized objects and `javax.naming.Reference` instances. Several c3p0 `ConnectionPoolDataSource` implementations have a property called `userOverridesAsString` which conceptually represents a `Map<String,Map<String,String>>`. Prior to v0.12.0, that property was maintained as a hex-encoded serialized object. Any attacker able to reset this property, on an existing `ConnectionPoolDataSource` or via maliciously crafted serialized objects or `javax.naming.Reference` instances could be tailored execute unexpected code on the application's `CLASSPATH`. The danger of this vulnerability was strongly magnified by vulnerabilities in c3p0's main dependency, mchange-commons-java. This library includes code that mirrors early implementations of JNDI functionality, including ungated support for remote `factoryClassLocation` values. Attackers could set c3p0's `userOverridesAsString` hex-encoded serialized objects that include objects "indirectly serialized" via JNDI references. Deserialization of those objects and dereferencing of the embedded `javax.naming.Reference` objects could provoke download and execution of malicious code from a remote `factoryClassLocation`. Although hazard presented by c3p0's vulnerabilites are exarcerbated by vulnerabilities in mchange-commons-java, use of Java-serialized-object hex as the format for a writable Java-Bean property, of objects that may be exposed across JNDI interfaces, represents a serious independent fragility. The `userOverridesAsString` property of c3p0 `ConnectionPoolDataSource` classes has been reimplemented to use a safe CSV-based format, rather than rely upon potentially dangerous Java object deserialization. c3p0-0.12.0+ and above depend upon mchange-commons-java 0.4.0+, which gates support for remote `factoryClassLocation` values by configuration parameters that default to restrictive values. c3p0 additionally enforces the new mchange-commons-java `com.mchange.v2.naming.nameGuardClassName` to prevent injection of unexpected, potentially remote JNDI names. There is no supported workaround for versions of c3p0 prior to 0.12.0.
CVE-2026-27798 High 2026-02-26 Not applicable No public exploit ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-15 and 6.9.13-40, a heap buffer over-read vulnerability occurs when processing an image with small dimension using the `-wavelet-denoise` operator. Versions 7.1.2-15 and 6.9.13-40 contain a patch.
CVE-2026-27727 High 2026-02-25 Protected by Waratek Proof of concept only mchange-commons-java, a library that provides Java utilities, includes code that mirrors early implementations of JNDI functionality, including support for remote `factoryClassLocation` values, by which code can be downloaded and invoked within a running application. If an attacker can provoke an application to read a maliciously crafted `jaxax.naming.Reference` or serialized object, they can provoke the download and execution of malicious code. Implementations of this functionality within the JDK were disabled by default behind a System property that defaults to `false`, `com.sun.jndi.ldap.object.trustURLCodebase`. However, since mchange-commons-java includes an independent implementation of JNDI derefencing, libraries (such as c3p0) that resolve references via that implementation could be provoked to download and execute malicious code even after the JDK was hardened. Mirroring the JDK patch, mchange-commons-java's JNDI functionality is gated by configuration parameters that default to restrictive values starting in version 0.4.0. No known workarounds are available. Versions prior to 0.4.0 should be avoided on application CLASSPATHs.
CVE-2026-26283 High 2026-02-24 Not applicable No public exploit ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-15 and 6.9.13-40, a `continue` statement in the JPEG extent binary search loop in the jpeg encoder causes an infinite loop when writing persistently fails. An attacker can trigger a 100% CPU consumption and process hang (Denial of Service) with a crafted image. Versions 7.1.2-15 and 6.9.13-40 contain a patch.
CVE-2026-26066 High 2026-02-24 Not applicable No public exploit ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-15 and 6.9.13-40, a crafted profile contain invalid IPTC data may cause an infinite loop when writing it with `IPTCTEXT`. Versions 7.1.2-15 and 6.9.13-40 contain a patch.
CVE-2026-25989 High 2026-02-24 Not applicable No public exploit ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-15 and 6.9.13-40, a crafted SVG file can cause a denial of service. An off-by-one boundary check (`>` instead of `>=`) that allows bypass the guard and reach an undefined `(size_t)` cast. Versions 7.1.2-15 and 6.9.13-40 contain a patch.
CVE-2026-25988 High 2026-02-24 Not applicable No public exploit ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-15 and 6.9.13-40, sometimes msl.c fails to update the stack index, so an image is stored in the wrong slot and never freed on error, causing leaks. Versions 7.1.2-15 and 6.9.13-40 contain a patch.
CVE-2026-25985 High 2026-02-24 Not applicable No public exploit ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-15 and 6.9.13-40, a crafted SVG file containing an malicious element causes ImageMagick to attempt to allocate ~674 GB of memory, leading to an out-of-memory abort. Versions 7.1.2-15 and 6.9.13-40 contain a patch.
CVE-2026-25970 High 2026-02-24 Not applicable No public exploit ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-15 and 6.9.13-40, a signed integer overflow vulnerability in ImageMagick's SIXEL decoder allows an attacker to trigger memory corruption and denial of service when processing a maliciously crafted SIXEL image file. The vulnerability occurs during buffer reallocation operations where pointer arithmetic using signed 32-bit integers overflows. Versions 7.1.2-15 and 6.9.13-40 contain a patch.
CVE-2026-25969 High 2026-02-24 Not applicable No public exploit ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to version 7.1.2-15, a memory leak exists in `coders/ashlar.c`. The `WriteASHLARImage` allocates a structure. However, when an exception is thrown, the allocated memory is not properly released, resulting in a potential memory leak. Version 7.1.2-15 contains a patch.
CVE-2026-25967 High 2026-02-24 Not applicable No public exploit ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to version 7.1.2-15, a stack-based buffer overflow exists in the ImageMagick FTXT image reader. A crafted FTXT file can cause out-of-bounds writes on the stack, leading to a crash. Version 7.1.2-15 contains a patch.
CVE-2026-25966 High 2026-02-24 Not applicable No public exploit ImageMagick is free and open-source software used for editing and manipulating digital images. The shipped "secure" security policy includes a rule intended to prevent reading/writing from standard streams. However, ImageMagick also supports fd:<n> pseudo-filenames (e.g., fd:0, fd:1). Prior to versions 7.1.2-15 and 6.9.13-40, this path form is not blocked by the secure policy templates, and therefore bypasses the protection goal of "no stdin/stdout." Versions 7.1.2-15 and 6.9.13-40 contain a patch by including a change to the more secure policies by default. As a workaround, add the change to one's security policy manually.
CVE-2026-25965 High 2026-02-24 Not applicable No public exploit ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-15 and 6.9.13-40, ImageMagick’s path security policy is enforced on the raw filename string before the filesystem resolves it. As a result, a policy rule such as /etc/* can be bypassed by a path traversal. The OS resolves the traversal and opens the sensitive file, but the policy matcher only sees the unnormalized path and therefore allows the read. This enables local file disclosure (LFI) even when policy-secure.xml is applied. Actions to prevent reading from files have been taken in versions .7.1.2-15 and 6.9.13-40 But it make sure writing is also not possible the following should be added to one's policy. This will also be included in ImageMagick's more secure policies by default.
CVE-2026-25799 High 2026-02-24 Not applicable No public exploit ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-15 and 6.9.13-40, a logic error in YUV sampling factor validation allows an invalid sampling factor to bypass checks and trigger a division-by-zero during image loading, resulting in a reliable denial-of-service. Versions 7.1.2-15 and 6.9.13-40 contain a patch.
CVE-2026-25798 High 2026-02-24 Not applicable No public exploit ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-15 and 6.9.13-40, a NULL pointer dereference in ClonePixelCacheRepository allows a remote attacker to crash any application linked against ImageMagick by supplying a crafted image file, resulting in denial of service. Versions 7.1.2-15 and 6.9.13-40 contain a patch.
CVE-2026-25796 High 2026-02-24 Not applicable No public exploit ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-15 and 6.9.13-40, in `ReadSTEGANOImage()` (`coders/stegano.c`), the `watermark` Image object is not freed on three early-return paths, resulting in a definite memory leak (~13.5KB+ per invocation) that can be exploited for denial of service. Versions 7.1.2-15 and 6.9.13-40 contain a patch.
CVE-2026-25795 High 2026-02-24 Not applicable No public exploit ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-15 and 6.9.13-40, in `ReadSFWImage()` (`coders/sfw.c`), when temporary file creation fails, `read_info` is destroyed before its `filename` member is accessed, causing a NULL pointer dereference and crash. Versions 7.1.2-15 and 6.9.13-40 contain a patch.
CVE-2026-25794 High 2026-02-24 Not applicable No public exploit ImageMagick is free and open-source software used for editing and manipulating digital images. `WriteUHDRImage` in `coders/uhdr.c` uses `int` arithmetic to compute the pixel buffer size. Prior to version 7.1.2-15, when image dimensions are large, the multiplication overflows 32-bit `int`, causing an undersized heap allocation followed by an out-of-bounds write. This can crash the process or potentially lead to an out of bounds heap write. Version 7.1.2-15 contains a patch.
CVE-2026-24485 High 2026-02-24 Not applicable No public exploit ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-15 and 6.9.13-40, when a PCD file does not contain a valid Sync marker, the DecodeImage() function becomes trapped in an infinite loop while searching for the Sync marker, causing the program to become unresponsive and continuously consume CPU resources, ultimately leading to system resource exhaustion and denial of service. Versions 7.1.2-15 and 6.9.13-40 contain a patch.
CVE-2026-24481 High 2026-02-24 Not applicable No public exploit ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-15 and 6.9.13-40, a heap information disclosure vulnerability exists in ImageMagick's PSD (Adobe Photoshop) format handler. When processing a maliciously crafted PSD file containing ZIP-compressed layer data that decompresses to less than the expected size, uninitialized heap memory is leaked into the output image. Versions 7.1.2-15 and 6.9.13-40 contain a patch.
CVE-2026-27099 High 2026-02-18 No exploit published No public exploit Jenkins 2.483 through 2.550 (both inclusive), LTS 2.492.1 through 2.541.1 (both inclusive) does not escape the user-provided description of the "Mark temporarily offline" offline cause, resulting in a stored cross-site scripting (XSS) vulnerability exploitable by attackers with Agent/Configure or Agent/Disconnect permission.
CVE-2026-24734 High 2026-02-17 No exploit published No public exploit Improper Input Validation vulnerability in Apache Tomcat Native, Apache Tomcat. When using an OCSP responder, Tomcat Native (and Tomcat's FFM port of the Tomcat Native code) did not complete verification or freshness checks on the OCSP response which could allow certificate revocation to be bypassed. This issue affects Apache Tomcat Native:  from 1.3.0 through 1.3.4, from 2.0.0 through 2.0.11; Apache Tomcat: from 11.0.0-M1 through 11.0.17, from 10.1.0-M7 through 10.1.51, from 9.0.83 through 9.0.114. The following versions were EOL at the time the CVE was created but are known to be affected: from 1.1.23 through 1.1.34, from 1.2.0 through 1.2.39. Older EOL versions are not affected. Apache Tomcat Native users are recommended to upgrade to versions 1.3.5 or later or 2.0.12 or later, which fix the issue. Apache Tomcat users are recommended to upgrade to versions 11.0.18 or later, 10.1.52 or later or 9.0.115 or later which fix the issue.
CVE-2025-33042 High 2026-02-13 No exploit published No public exploit Improper Control of Generation of Code ('Code Injection') vulnerability in Apache Avro Java SDK when generating specific records from untrusted Avro schemas. This issue affects Apache Avro Java SDK: all versions through 1.11.4 and version 1.12.0. Users are recommended to upgrade to version 1.12.1 or 1.11.5, which fix the issue.
CVE-2026-25990 High 2026-02-11 Not applicable No public exploit Pillow is a Python imaging library. From 10.3.0 to before 12.1.1, an out-of-bounds write may be triggered when loading a specially crafted PSD image. This vulnerability is fixed in 12.1.1.
CVE-2026-20652 High 2026-02-11 Outside Waratek scope No public exploit The issue was addressed with improved memory handling. This issue is fixed in Safari 26.3, iOS 18.7.5 and iPadOS 18.7.5, iOS 26.3 and iPadOS 26.3, macOS Tahoe 26.3, visionOS 26.3. A remote attacker may be able to cause a denial-of-service.
CVE-2026-20644 High 2026-02-11 Not applicable No public exploit The issue was addressed with improved memory handling. This issue is fixed in Safari 26.3, iOS 18.7.5 and iPadOS 18.7.5, iOS 26.3 and iPadOS 26.3, macOS Tahoe 26.3, visionOS 26.3. Processing maliciously crafted web content may lead to an unexpected process crash.
CVE-2026-20636 High 2026-02-11 Not applicable No public exploit The issue was addressed with improved memory handling. This issue is fixed in Safari 26.3, iOS 26.3 and iPadOS 26.3, macOS Tahoe 26.3, visionOS 26.3. Processing maliciously crafted web content may lead to an unexpected process crash.
CVE-2026-20635 High 2026-02-11 Not applicable No public exploit The issue was addressed with improved memory handling. This issue is fixed in Safari 26.3, iOS 18.7.5 and iPadOS 18.7.5, iOS 26.3 and iPadOS 26.3, macOS Tahoe 26.3, tvOS 26.3, visionOS 26.3, watchOS 26.3. Processing maliciously crafted web content may lead to an unexpected process crash.
CVE-2026-20608 High 2026-02-11 Not applicable No public exploit This issue was addressed through improved state management. This issue is fixed in Safari 26.3, iOS 18.7.5 and iPadOS 18.7.5, iOS 26.3 and iPadOS 26.3, macOS Tahoe 26.3, visionOS 26.3. Processing maliciously crafted web content may lead to an unexpected process crash.
CVE-2026-26007 High 2026-02-10 Not applicable No public exploit cryptography is a package designed to expose cryptographic primitives and recipes to Python developers. Prior to 46.0.5, the public_key_from_numbers (or EllipticCurvePublicNumbers.public_key()), EllipticCurvePublicNumbers.public_key(), load_der_public_key() and load_pem_public_key() functions do not verify that the point belongs to the expected prime-order subgroup of the curve. This missing validation allows an attacker to provide a public key point P from a small-order subgroup. This can lead to security issues in various situations, such as the most commonly used signature verification (ECDSA) and shared key negotiation (ECDH). When the victim computes the shared secret as S = [victim_private_key]P via ECDH, this leaks information about victim_private_key mod (small_subgroup_order). For curves with cofactor > 1, this reveals the least significant bits of the private key. When these weak public keys are used in ECDSA , it's easy to forge signatures on the small subgroup. Only SECT curves are impacted by this. This vulnerability is fixed in 46.0.5.
CVE-2026-25646 High 2026-02-10 Not applicable Proof of concept only LIBPNG is a reference library for use in applications that read, create, and manipulate PNG (Portable Network Graphics) raster image files. Prior to 1.6.55, an out-of-bounds read vulnerability exists in the png_set_quantize() API function. When the function is called with no histogram and the number of colors in the palette is more than twice the maximum supported by the user's display, certain palettes will cause the function to enter into an infinite loop that reads past the end of an internal heap-allocated buffer. The images that trigger this vulnerability are valid per the PNG specification. This vulnerability is fixed in 1.6.55.
CVE-2025-61732 High 2026-02-05 Not applicable No public exploit A discrepancy between how Go and C/C++ comments were parsed allowed for code smuggling into the resulting cgo binary.
CVE-2026-1642 High 2026-02-04 Not applicable No public exploit A vulnerability exists in NGINX OSS and NGINX Plus when configured to proxy to upstream Transport Layer Security (TLS) servers. An attacker with a man-in-the-middle (MITM) position on the upstream server side—along with conditions beyond the attacker's control—may be able to inject plain text data into the response from an upstream proxied server.  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.
CVE-2026-24512 High 2026-02-03 Not applicable No public exploit A security issue was discovered in ingress-nginx where the `rules.http.paths.path` Ingress field can be used to inject configuration into nginx. This can lead to arbitrary code execution in the context of the ingress-nginx controller, and disclosure of Secrets accessible to the controller. (Note that in the default installation, the controller can access all Secrets cluster-wide.)
CVE-2026-25210 High 2026-01-30 Not applicable No public exploit In libexpat before 2.7.4, the doContent function does not properly determine the buffer size bufSize because there is no integer overflow check for tag buffer reallocation.
CVE-2024-4027 High 2026-01-30 No exploit published No public exploit A flaw was found in Undertow. Servlets using a method that calls HttpServletRequestImpl.getParameterNames() can cause an OutOfMemoryError when the client sends a request with large parameter names. This issue can be exploited by an unauthorized user to cause a remote denial-of-service (DoS) attack.
CVE-2025-69421 High 2026-01-27 Not applicable No public exploit Issue summary: Processing a malformed PKCS#12 file can trigger a NULL pointer dereference in the PKCS12_item_decrypt_d2i_ex() function. Impact summary: A NULL pointer dereference can trigger a crash which leads to Denial of Service for an application processing PKCS#12 files. The PKCS12_item_decrypt_d2i_ex() function does not check whether the oct parameter is NULL before dereferencing it. When called from PKCS12_unpack_p7encdata() with a malformed PKCS#12 file, this parameter can be NULL, causing a crash. The vulnerability is limited to Denial of Service and cannot be escalated to achieve code execution or memory disclosure. Exploiting this issue requires an attacker to provide a malformed PKCS#12 file to an application that processes it. For that reason the issue was assessed as Low severity according to our Security Policy. The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the PKCS#12 implementation is outside the OpenSSL FIPS module boundary. OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0, 1.1.1 and 1.0.2 are vulnerable to this issue.
CVE-2025-69420 High 2026-01-27 Not applicable No public exploit Issue summary: A type confusion vulnerability exists in the TimeStamp Response verification code where an ASN1_TYPE union member is accessed without first validating the type, causing an invalid or NULL pointer dereference when processing a malformed TimeStamp Response file. Impact summary: An application calling TS_RESP_verify_response() with a malformed TimeStamp Response can be caused to dereference an invalid or NULL pointer when reading, resulting in a Denial of Service. The functions ossl_ess_get_signing_cert() and ossl_ess_get_signing_cert_v2() access the signing cert attribute value without validating its type. When the type is not V_ASN1_SEQUENCE, this results in accessing invalid memory through the ASN1_TYPE union, causing a crash. Exploiting this vulnerability requires an attacker to provide a malformed TimeStamp Response to an application that verifies timestamp responses. The TimeStamp protocol (RFC 3161) is not widely used and the impact of the exploit is just a Denial of Service. For these reasons the issue was assessed as Low severity. The FIPS modules in 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the TimeStamp Response implementation is outside the OpenSSL FIPS module boundary. OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0 and 1.1.1 are vulnerable to this issue. OpenSSL 1.0.2 is not affected by this issue.
CVE-2025-69419 High 2026-01-27 Not applicable No public exploit Issue summary: Calling PKCS12_get_friendlyname() function on a maliciously crafted PKCS#12 file with a BMPString (UTF-16BE) friendly name containing non-ASCII BMP code point can trigger a one byte write before the allocated buffer. Impact summary: The out-of-bounds write can cause a memory corruption which can have various consequences including a Denial of Service. The OPENSSL_uni2utf8() function performs a two-pass conversion of a PKCS#12 BMPString (UTF-16BE) to UTF-8. In the second pass, when emitting UTF-8 bytes, the helper function bmp_to_utf8() incorrectly forwards the remaining UTF-16 source byte count as the destination buffer capacity to UTF8_putc(). For BMP code points above U+07FF, UTF-8 requires three bytes, but the forwarded capacity can be just two bytes. UTF8_putc() then returns -1, and this negative value is added to the output length without validation, causing the length to become negative. The subsequent trailing NUL byte is then written at a negative offset, causing write outside of heap allocated buffer. The vulnerability is reachable via the public PKCS12_get_friendlyname() API when parsing attacker-controlled PKCS#12 files. While PKCS12_parse() uses a different code path that avoids this issue, PKCS12_get_friendlyname() directly invokes the vulnerable function. Exploitation requires an attacker to provide a malicious PKCS#12 file to be parsed by the application and the attacker can just trigger a one zero byte write before the allocated buffer. For that reason the issue was assessed as Low severity according to our Security Policy. The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the PKCS#12 implementation is outside the OpenSSL FIPS module boundary. OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0 and 1.1.1 are vulnerable to this issue. OpenSSL 1.0.2 is not affected by this issue.
CVE-2025-27821 High 2026-01-26 Not applicable No public exploit Out-of-bounds Write vulnerability in Apache Hadoop HDFS native client. This issue affects Apache Hadoop: from 3.2.0 before 3.4.2. Users are recommended to upgrade to version 3.4.2, which fixes the issue.
CVE-2026-22444 High 2026-01-21 No exploit published No public exploit The "create core" API of Apache Solr 8.6 through 9.10.0 lacks sufficient input validation on some API parameters, which can cause Solr to check the existence of and attempt to read file-system paths that should be disallowed by Solr's "allowPaths" security setting https://https://solr.apache.org/guide/solr/latest/configuration-guide/configuring-solr-xml.html#the-solr-element .  These read-only accesses can allow users to create cores using unexpected configsets if any are accessible via the filesystem.  On Windows systems configured to allow UNC paths this can additionally cause disclosure of NTLM "user" hashes.  Solr deployments are subject to this vulnerability if they meet the following criteria: * Solr is running in its "standalone" mode. * Solr's "allowPath" setting is being used to restrict file access to certain directories. * Solr's "create core" API is exposed and accessible to untrusted users.  This can happen if Solr's RuleBasedAuthorizationPlugin https://solr.apache.org/guide/solr/latest/deployment-guide/rule-based-authorization-plugin.html is disabled, or if it is enabled but the "core-admin-edit" predefined permission (or an equivalent custom permission) is given to low-trust (i.e. non-admin) user roles. Users can mitigate this by enabling Solr's RuleBasedAuthorizationPlugin (if disabled) and configuring a permission-list that prevents untrusted users from creating new Solr cores.  Users should also upgrade to Apache Solr 9.10.1 or greater, which contain fixes for this issue.
CVE-2026-22022 High 2026-01-21 No exploit published No public exploit Deployments of Apache Solr 5.3.0 through 9.10.0 that rely on Solr's "Rule Based Authorization Plugin" are vulnerable to allowing unauthorized access to certain Solr APIs, due to insufficiently strict input validation in those components.  Only deployments that meet all of the following criteria are impacted by this vulnerability: * Use of Solr's "RuleBasedAuthorizationPlugin" * A RuleBasedAuthorizationPlugin config (see security.json) that specifies multiple "roles" * A RuleBasedAuthorizationPlugin permission list (see security.json) that uses one or more of the following pre-defined permission rules: "config-read", "config-edit", "schema-read", "metrics-read", or "security-read". * A RuleBasedAuthorizationPlugin permission list that doesn't define the "all" pre-defined permission * A networking setup that allows clients to make unfiltered network requests to Solr. (i.e. user-submitted HTTP/HTTPS requests reach Solr as-is, unmodified or restricted by any intervening proxy or gateway) Users can mitigate this vulnerability by ensuring that their RuleBasedAuthorizationPlugin configuration specifies the "all" pre-defined permission and associates the permission with an "admin" or other privileged role.  Users can also upgrade to a Solr version outside of the impacted range, such as the recently released Solr 9.10.1.
CVE-2026-21945 High 2026-01-20 Outside Waratek scope No public exploit Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: Security). Supported versions that are affected are Oracle Java SE: 8u471, 8u471-b50, 8u471-perf, 11.0.29, 17.0.17, 21.0.9, 25.0.1; Oracle GraalVM for JDK: 17.0.17 and 21.0.9; Oracle GraalVM Enterprise Edition: 21.3.16. Easily exploitable vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Note: This vulnerability applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. This vulnerability does not apply to Java deployments, typically in servers, that load and run only trusted code (e.g., code installed by an administrator). CVSS 3.1 Base Score 7.5 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H).
CVE-2026-21939 High 2026-01-20 Not applicable No public exploit Vulnerability in the SQLcl component of Oracle Database Server. Supported versions that are affected are 23.4.0-23.26.0. Difficult to exploit vulnerability allows unauthenticated attacker with logon to the infrastructure where SQLcl executes to compromise SQLcl. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in takeover of SQLcl. CVSS 3.1 Base Score 7.0 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:H/PR:N/UI:R/S:U/C:H/I:H/A:H).
CVE-2026-21637 High 2026-01-20 Not applicable No public exploit A flaw in Node.js TLS error handling allows remote attackers to crash or exhaust resources of a TLS server when `pskCallback` or `ALPNCallback` are in use. Synchronous exceptions thrown during these callbacks bypass standard TLS error handling paths (tlsClientError and error), causing either immediate process termination or silent file descriptor leaks that eventually lead to denial of service. Because these callbacks process attacker-controlled input during the TLS handshake, a remote client can repeatedly trigger the issue. This vulnerability affects TLS servers using PSK or ALPN callbacks across Node.js versions where these callbacks throw without being safely wrapped.
CVE-2025-59466 High 2026-01-20 Not applicable No public exploit We have identified a bug in Node.js error handling where "Maximum call stack size exceeded" errors become uncatchable when `async_hooks.createHook()` is enabled. Instead of reaching `process.on('uncaughtException')`, the process terminates, making the crash unrecoverable. Applications that rely on `AsyncLocalStorage` (v22, v20) or `async_hooks.createHook()` (v24, v22, v20) become vulnerable to denial-of-service crashes triggered by deep recursion under specific conditions.
CVE-2025-59465 High 2026-01-20 Not applicable No public exploit A malformed `HTTP/2 HEADERS` frame with oversized, invalid `HPACK` data can cause Node.js to crash by triggering an unhandled `TLSSocket` error `ECONNRESET`. Instead of safely closing the connection, the process crashes, enabling a remote denial of service. This primarily affects applications that do not attach explicit error handlers to secure sockets, for example: ``` server.on('secureConnection', socket => { socket.on('error', err => { console.log(err) }) }) ```
CVE-2025-55131 High 2026-01-20 Not applicable No public exploit A flaw in Node.js's buffer allocation logic can expose uninitialized memory when allocations are interrupted, when using the `vm` module with the timeout option. Under specific timing conditions, buffers allocated with `Buffer.alloc` and other `TypedArray` instances like `Uint8Array` may contain leftover data from previous operations, allowing in-process secrets like tokens or passwords to leak or causing data corruption. While exploitation typically requires precise timing or in-process code execution, it can become remotely exploitable when untrusted input influences workload and timeouts, leading to potential confidentiality and integrity impact.
CVE-2026-23490 High 2026-01-16 Not applicable Proof of concept only pyasn1 is a generic ASN.1 library for Python. Prior to 0.6.2, a Denial-of-Service issue has been found that leads to memory exhaustion from malformed RELATIVE-OID with excessive continuation octets. This vulnerability is fixed in 0.6.2.
CVE-2026-0915 High 2026-01-15 Not applicable Proof of concept only Calling getnetbyaddr or getnetbyaddr_r with a configured nsswitch.conf that specifies the library's DNS backend for networks and queries for a zero-valued network in the GNU C Library version 2.0 to version 2.42 can leak stack contents to the configured DNS resolver.
CVE-2026-0861 High 2026-01-14 Not applicable No public exploit Passing too large an alignment to the memalign suite of functions (memalign, posix_memalign, aligned_alloc) in the GNU C Library version 2.30 to 2.42 may result in an integer overflow, which could consequently result in a heap corruption. Note that the attacker must have control over both, the size as well as the alignment arguments of the memalign function to be able to exploit this. The size parameter must be close enough to PTRDIFF_MAX so as to overflow size_t along with the large alignment argument. This limits the malicious inputs for the alignment for memalign to the range [1<<62+ 1, 1<<63] and exactly 1<<63 for posix_memalign and aligned_alloc. Typically the alignment argument passed to such functions is a known constrained quantity (e.g. page size, block size, struct sizes) and is not attacker controlled, because of which this may not be easily exploitable in practice. An application bug could potentially result in the input alignment being too large, e.g. due to a different buffer overflow or integer overflow in the application or its dependent libraries, but that is again an uncommon usage pattern given typical sources of alignments.
CVE-2026-22801 High 2026-01-12 Not applicable No public exploit LIBPNG is a reference library for use in applications that read, create, and manipulate PNG (Portable Network Graphics) raster image files. From 1.6.26 to 1.6.53, there is an integer truncation in the libpng simplified write API functions png_write_image_16bit and png_write_image_8bit causes heap buffer over-read when the caller provides a negative row stride (for bottom-up image layouts) or a stride exceeding 65535 bytes. The bug was introduced in libpng 1.6.26 (October 2016) by casts added to silence compiler warnings on 16-bit systems. This vulnerability is fixed in 1.6.54.
CVE-2026-22695 High 2026-01-12 Not applicable No public exploit LIBPNG is a reference library for use in applications that read, create, and manipulate PNG (Portable Network Graphics) raster image files. From 1.6.51 to 1.6.53, there is a heap buffer over-read in the libpng simplified API function png_image_finish_read when processing interlaced 16-bit PNGs with 8-bit output format and non-minimal row stride. This is a regression introduced by the fix for CVE-2025-65018. This vulnerability is fixed in 1.6.54.
CVE-2025-14279 High 2026-01-12 Not applicable No public exploit MLFlow versions up to and including 3.4.0 are vulnerable to DNS rebinding attacks due to a lack of Origin header validation in the MLFlow REST server. This vulnerability allows malicious websites to bypass Same-Origin Policy protections and execute unauthorized calls against REST endpoints. An attacker can query, update, and delete experiments via the affected endpoints, leading to potential data exfiltration, destruction, or manipulation. The issue is resolved in version 3.5.0.
CVE-2026-21441 High 2026-01-07 Not applicable No public exploit urllib3 is an HTTP client library for Python. urllib3's streaming API is designed for the efficient handling of large HTTP responses by reading the content in chunks, rather than loading the entire response body into memory at once. urllib3 can perform decoding or decompression based on the HTTP `Content-Encoding` header (e.g., `gzip`, `deflate`, `br`, or `zstd`). When using the streaming API, the library decompresses only the necessary bytes, enabling partial content consumption. Starting in version 1.22 and prior to version 2.6.3, for HTTP redirect responses, the library would read the entire response body to drain the connection and decompress the content unnecessarily. This decompression occurred even before any read methods were called, and configured read limits did not restrict the amount of decompressed data. As a result, there was no safeguard against decompression bombs. A malicious server could exploit this to trigger excessive resource consumption on the client. Applications and libraries are affected when they stream content from untrusted sources by setting `preload_content=False` when they do not disable redirects. Users should upgrade to at least urllib3 v2.6.3, in which the library does not decode content of redirect responses when `preload_content=False`. If upgrading is not immediately possible, disable redirects by setting `redirect=False` for requests to untrusted source.
CVE-2025-13151 High 2026-01-07 Not applicable No public exploit Stack-based buffer overflow in libtasn1 version: v4.20.0. The function fails to validate the size of input data resulting in a buffer overflow in asn1_expend_octet_string.
CVE-2025-69223 High 2026-01-05 Not applicable No public exploit AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Versions 3.13.2 and below allow a zip bomb to be used to execute a DoS against the AIOHTTP server. An attacker may be able to send a compressed request that when decompressed by AIOHTTP could exhaust the host's memory. This issue is fixed in version 3.13.3.
CVE-2026-21452 High 2026-01-02 Protected by Waratek Proof of concept only MessagePack for Java is a serializer implementation for Java. A denial-of-service vulnerability exists in versions prior to 0.9.11 when deserializing .msgpack files containing EXT32 objects with attacker-controlled payload lengths. While MessagePack-Java parses extension headers lazily, it later trusts the declared EXT payload length when materializing the extension data. When ExtensionValue.getData() is invoked, the library attempts to allocate a byte array of the declared length without enforcing any upper bound. A malicious .msgpack file of only a few bytes can therefore trigger unbounded heap allocation, resulting in JVM heap exhaustion, process termination, or service unavailability. This vulnerability is triggered during model loading / deserialization, making it a model format vulnerability suitable for remote exploitation. The vulnerability enables a remote denial-of-service attack against applications that deserialize untrusted .msgpack model files using MessagePack for Java. A specially crafted but syntactically valid .msgpack file containing an EXT32 object with an attacker-controlled, excessively large payload length can trigger unbounded memory allocation during deserialization. When the model file is loaded, the library trusts the declared length metadata and attempts to allocate a byte array of that size, leading to rapid heap exhaustion, excessive garbage collection, or immediate JVM termination with an OutOfMemoryError. The attack requires no malformed bytes, user interaction, or elevated privileges and can be exploited remotely in real-world environments such as model registries, inference services, CI/CD pipelines, and cloud-based model hosting platforms that accept or fetch .msgpack artifacts. Because the malicious file is extremely small yet valid, it can bypass basic validation and scanning mechanisms, resulting in complete service unavailability and potential cascading failures in production systems. Version 0.9.11 fixes the vulnerability.
CVE-2025-68431 High 2025-12-29 Not applicable No public exploit libheif is an HEIF and AVIF file format decoder and encoder. Prior to version 1.21.0, a crafted HEIF that exercises the overlay image item path triggers a heap buffer over-read in `HeifPixelImage::overlay()`. The function computes a negative row length (likely from an unclipped overlay rectangle or invalid offsets), which then underflows when converted to `size_t` and is passed to `memcpy`, causing a very large read past the end of the source plane and a crash. Version 1.21.0 contains a patch. As a workaround, avoid decoding images using `iovl` overlay boxes.
CVE-2025-68973 High 2025-12-28 Not applicable Proof of concept only In GnuPG before 2.4.9, armor_filter in g10/armor.c has two increments of an index variable where one is intended, leading to an out-of-bounds write for crafted input. (For ExtendedLTS, 2.2.51 and later are fixed versions.)
CVE-2024-29371 High 2025-12-17 No exploit published Proof of concept only In jose4j before 0.9.6, an attacker can cause a Denial-of-Service (DoS) condition by crafting a malicious JSON Web Encryption (JWE) token with an exceptionally high compression ratio. When this token is processed by the server, it results in significant memory allocation and processing time during decompression.
CVE-2025-67635 High 2025-12-10 No exploit published No public exploit Jenkins 2.540 and earlier, LTS 2.528.2 and earlier does not properly close HTTP-based CLI connections when the connection stream becomes corrupted, allowing unauthenticated attackers to cause a denial of service.
CVE-2025-66566 High 2025-12-05 No exploit published No public exploit yawkat LZ4 Java provides LZ4 compression for Java. Insufficient clearing of the output buffer in Java-based decompressor implementations in lz4-java 1.10.0 and earlier allows remote attackers to read previous buffer contents via crafted compressed input. In applications where the output buffer is reused without being cleared, this may lead to disclosure of sensitive data. JNI-based implementations are not affected. This vulnerability is fixed in 1.10.1.
CVE-2025-66471 High 2025-12-05 Not applicable No public exploit urllib3 is a user-friendly HTTP client library for Python. Starting in version 1.0 and prior to 2.6.0, the Streaming API improperly handles highly compressed data. urllib3's streaming API is designed for the efficient handling of large HTTP responses by reading the content in chunks, rather than loading the entire response body into memory at once. When streaming a compressed response, urllib3 can perform decoding or decompression based on the HTTP Content-Encoding header (e.g., gzip, deflate, br, or zstd). The library must read compressed data from the network and decompress it until the requested chunk size is met. Any resulting decompressed data that exceeds the requested amount is held in an internal buffer for the next read operation. The decompression logic could cause urllib3 to fully decode a small amount of highly compressed data in a single operation. This can result in excessive resource consumption (high CPU usage and massive memory allocation for the decompressed data.
CVE-2025-66418 High 2025-12-05 Not applicable No public exploit urllib3 is a user-friendly HTTP client library for Python. Starting in version 1.24 and prior to 2.6.0, the number of links in the decompression chain was unbounded allowing a malicious server to insert a virtually unlimited number of compression steps leading to high CPU usage and massive memory allocation for the decompressed data. This vulnerability is fixed in 2.6.0.
CVE-2025-59775 High 2025-12-05 Not applicable No public exploit Server-Side Request Forgery (SSRF) vulnerability  in Apache HTTP Server on Windows with AllowEncodedSlashes On and MergeSlashes Off  allows to potentially leak NTLM hashes to a malicious server via SSRF and malicious requests or content Users are recommended to upgrade to version 2.4.66, which fixes the issue.
CVE-2025-58098 High 2025-12-05 Not applicable No public exploit Apache HTTP Server 2.4.65 and earlier with Server Side Includes (SSI) enabled and mod_cgid (but not mod_cgi) passes the shell-escaped query string to #exec cmd="..." directives. This issue affects Apache HTTP Server before 2.4.66. Users are recommended to upgrade to version 2.4.66, which fixes the issue.
CVE-2025-55753 High 2025-12-05 Not applicable No public exploit An integer overflow in the case of failed ACME certificate renewal leads, after a number of failures (~30 days in default configurations), to the backoff timer becoming 0. Attempts to renew the certificate then are repeated without delays until it succeeds. This issue affects Apache HTTP Server: from 2.4.30 before 2.4.66. Users are recommended to upgrade to version 2.4.66, which fixes the issue.
CVE-2024-3884 High 2025-12-03 No exploit published No public exploit A flaw was found in Undertow that can cause remote denial of service attacks. When the server uses the FormEncodedDataDefinition.doParse(StreamSourceChannel) method to parse large form data encoding with application/x-www-form-urlencoded, the method will cause an OutOfMemory issue. This flaw allows unauthorized users to cause a remote denial of service (DoS) attack.
CVE-2025-61729 High 2025-12-02 Not applicable No public exploit Within HostnameError.Error(), when constructing an error string, there is no limit to the number of hosts that will be printed out. Furthermore, the error string is constructed by repeated string concatenation, leading to quadratic runtime. Therefore, a certificate provided by a malicious actor can result in excessive resource consumption.
CVE-2025-64775 High 2025-12-01 No exploit published No public exploit Denial of Service vulnerability in Apache Struts, file leak in multipart request processing causes disk exhaustion. This issue affects Apache Struts: from 2.0.0 through 6.7.0, from 7.0.0 through 7.0.3. Users are recommended to upgrade to version 6.8.0 or 7.1.1, which fixes the issue.
CVE-2025-12183 High 2025-11-28 No exploit published No public exploit Out-of-bounds memory operations in org.lz4:lz4-java 1.8.0 and earlier allow remote attackers to cause denial of service and read adjacent memory via untrusted compressed input.
CVE-2025-13601 High 2025-11-26 Not applicable No public exploit A heap-based buffer overflow problem was found in glib through an incorrect calculation of buffer size in the g_escape_uri_string() function. If the string to escape contains a very large number of unacceptable characters (which would need escaping), the calculation of the length of the escaped string could overflow, leading to a potential write off the end of the newly allocated string.
CVE-2025-65018 High 2025-11-25 Not applicable Proof of concept only LIBPNG is a reference library for use in applications that read, create, and manipulate PNG (Portable Network Graphics) raster image files. From version 1.6.0 to before 1.6.51, there is a heap buffer overflow vulnerability in the libpng simplified API function png_image_finish_read when processing 16-bit interlaced PNGs with 8-bit output format. Attacker-crafted interlaced PNG files cause heap writes beyond allocated buffer bounds. This issue has been patched in version 1.6.51.
CVE-2025-64720 High 2025-11-25 Not applicable Proof of concept only LIBPNG is a reference library for use in applications that read, create, and manipulate PNG (Portable Network Graphics) raster image files. From version 1.6.0 to before 1.6.51, an out-of-bounds read vulnerability exists in png_image_read_composite when processing palette images with PNG_FLAG_OPTIMIZE_ALPHA enabled. The palette compositing code in png_init_read_transformations incorrectly applies background compositing during premultiplication, violating the invariant component ≤ alpha × 257 required by the simplified PNG API. This issue has been patched in version 1.6.51.
CVE-2025-43457 High 2025-11-04 Not applicable No public exploit A use-after-free issue was addressed with improved memory management. This issue is fixed in Safari 26.1, iOS 26.1 and iPadOS 26.1, macOS Tahoe 26.1, visionOS 26.1, watchOS 26.1. Processing maliciously crafted web content may lead to an unexpected Safari crash.
CVE-2025-61725 High 2025-10-29 Not applicable No public exploit The ParseAddress function constructs domain-literal address components through repeated string concatenation. When parsing large domain-literal components, this can cause excessive CPU consumption.
CVE-2025-61723 High 2025-10-29 Not applicable No public exploit The processing time for parsing some invalid inputs scales non-linearly with respect to the size of the input. This affects programs which parse untrusted PEM inputs.
CVE-2025-58188 High 2025-10-29 Not applicable No public exploit Validating certificate chains which contain DSA public keys can cause programs to panic, due to a interface cast that assumes they implement the Equal method. This affects programs which validate arbitrary certificate chains.
CVE-2025-58187 High 2025-10-29 Not applicable No public exploit Due to the design of the name constraint checking algorithm, the processing time of some inputs scale non-linearly with respect to the size of the certificate. This affects programs which validate arbitrary certificate chains.
CVE-2025-41253 High 2025-10-16 No exploit published No public exploit The following versions of Spring Cloud Gateway Server Webflux may be vulnerable to the ability to expose environment variables and system properties to attackers. An application should be considered vulnerable when all the following are true: * The application is using Spring Cloud Gateway Server Webflux (Spring Cloud Gateway Server WebMVC is not vulnerable). * An admin or untrusted third party using Spring Expression Language (SpEL) to access environment variables or system properties via routes. * An untrusted third party could create a route that uses SpEL to access environment variables or system properties if: * The Spring Cloud Gateway Server Webflux actuator web endpoint is enabled via management.endpoints.web.exposure.include=gateway and management.endpoint.gateway.enabled=trueor management.endpoint.gateway.access=unrestricte. * The actuator endpoints are available to attackers. * The actuator endpoints are unsecured.
CVE-2025-26333 High 2025-09-25 Not applicable No public exploit Dell BSAFE Crypto-J generates an error message that includes sensitive information about its environment and associated data. A remote attacker could potentially exploit this vulnerability, leading to information exposure.
CVE-2025-9900 High 2025-09-23 Not applicable Proof of concept only A flaw was found in Libtiff. This vulnerability is a "write-what-where" condition, triggered when the library processes a specially crafted TIFF image file. By providing an abnormally large image height value in the file's metadata, an attacker can trick the library into writing attacker-controlled color data to an arbitrary memory location. This memory corruption can be exploited to cause a denial of service (application crash) or to achieve arbitrary code execution with the permissions of the user.
CVE-2025-41249 High 2025-09-16 No exploit published No public exploit The Spring Framework annotation detection mechanism may not correctly resolve annotations on methods within type hierarchies with a parameterized super type with unbounded generics. This can be an issue if such annotations are used for authorization decisions. Your application may be affected by this if you are using Spring Security's @EnableMethodSecurity feature. You are not affected by this if you are not using @EnableMethodSecurity or if you do not use security annotations on methods in generic superclasses or generic interfaces. This CVE is published in conjunction with CVE-2025-41248 https://spring.io/security/cve-2025-41248 .
CVE-2025-41248 High 2025-09-16 No exploit published No public exploit The Spring Security annotation detection mechanism may not correctly resolve annotations on methods within type hierarchies with a parameterized super type with unbounded generics. This can be an issue when using @PreAuthorize and other method security annotations, resulting in an authorization bypass. Your application may be affected by this if you are using Spring Security's @EnableMethodSecurity feature. You are not affected by this if you are not using @EnableMethodSecurity or if you do not use security annotations on methods in generic superclasses or generic interfaces. This CVE is published in conjunction with CVE-2025-41249 https://spring.io/security/cve-2025-41249 .
CVE-2025-9086 High 2025-09-12 Not applicable No public exploit 1. A cookie is set using the `secure` keyword for `https://target` 2. curl is redirected to or otherwise made to speak with `http://target` (same hostname, but using clear text HTTP) using the same cookie set 3. The same cookie name is set - but with only a slash as path (`path="/"`). Since this site is not secure, the cookie *should* be ignored. 4. A bug in the path comparison logic makes curl read outside a heap buffer boundary The bug either causes a crash or it potentially makes the comparison come to the wrong conclusion and lets the clear-text site override the contents of the secure cookie, contrary to expectations and depending on the memory contents immediately following the single-byte allocation that holds the path. The presumed and correct behavior would be to plainly ignore the second set of the cookie since it was already set as secure on a secure host so overriding it on an insecure host should not be okay.
CVE-2025-58754 High 2025-09-12 Not applicable Proof of concept only Axios is a promise based HTTP client for the browser and Node.js. When Axios starting in version 0.28.0 and prior to versions 0.30.2 and 1.12.0 runs on Node.js and is given a URL with the `data:` scheme, it does not perform HTTP. Instead, its Node http adapter decodes the entire payload into memory (`Buffer`/`Blob`) and returns a synthetic 200 response. This path ignores `maxContentLength` / `maxBodyLength` (which only protect HTTP responses), so an attacker can supply a very large `data:` URI and cause the process to allocate unbounded memory and crash (DoS), even if the caller requested `responseType: 'stream'`. Versions 0.30.2 and 1.12.0 contain a patch for the issue.
CVE-2025-5115 High 2025-08-20 No exploit published No public exploit In Eclipse Jetty, versions <=9.4.57, <=10.0.25, <=11.0.25, <=12.0.21, <=12.1.0.alpha2, an HTTP/2 client may trigger the server to send RST_STREAM frames, for example by sending frames that are malformed or that should not be sent in a particular stream state, therefore forcing the server to consume resources such as CPU and memory. For example, a client can open a stream and then send WINDOW_UPDATE frames with window size increment of 0, which is illegal. Per specification https://www.rfc-editor.org/rfc/rfc9113.html#name-window_update , the server should send a RST_STREAM frame. The client can now open another stream and send another bad WINDOW_UPDATE, therefore causing the server to consume more resources than necessary, as this case does not exceed the max number of concurrent streams, yet the client is able to create an enormous amount of streams in a short period of time. The attack can be performed with other conditions (for example, a DATA frame for a closed stream) that cause the server to send a RST_STREAM frame. Links: * https://github.com/jetty/jetty.project/security/advisories/GHSA-mmxm-8w33-wc4h
CVE-2025-55163 High 2025-08-13 No exploit published No public exploit Netty is an asynchronous, event-driven network application framework. Prior to versions 4.1.124.Final and 4.2.4.Final, Netty is vulnerable to MadeYouReset DDoS. This is a logical vulnerability in the HTTP/2 protocol, that uses malformed HTTP/2 control frames in order to break the max concurrent streams limit - which results in resource exhaustion and distributed denial of service. This issue has been patched in versions 4.1.124.Final and 4.2.4.Final.
CVE-2025-8194 High 2025-07-28 Not applicable No public exploit There is a defect in the CPython “tarfile” module affecting the “TarFile” extraction and entry enumeration APIs. The tar implementation would process tar archives with negative offsets without error, resulting in an infinite loop and deadlock during the parsing of maliciously crafted tar archives. This vulnerability can be mitigated by including the following patch after importing the “tarfile” module:  https://gist.github.com/sethmlarson/1716ac5b82b73dbcbf23ad2eff8b33e1
CVE-2025-27210 High 2025-07-18 Not applicable Working exploit published An incomplete fix has been identified for CVE-2025-23084 in Node.js, specifically affecting Windows device names like CON, PRN, and AUX. This vulnerability affects Windows users of `path.join` API.
‹ prev page 1 of 2 next ›