WaratekVRT Sign in

Apache CVEs

1,875 CVEs, 85 exploited, 481 protected by Waratek

Reset
More filters (1)
Columns
Vendor apache✕
Overview 1,875 matches · 477 protected · 85 exploited · 31 CISA KEV · 208 public PoC · 158 EPSS ≥ 0.5
1,875matches 477protected25.4% 85exploited4.5% 31CISA KEV1.7% 208public PoC11.1% 158EPSS ≥ 0.58.4%
Protected by Waratek 481 25.7% Rule in development 1 0.1% Mitigation candidate 120 6.4% No exploit published 1,273 67.9%
Critical 382 20.4% High 716 38.2% Medium 742 39.6% Low 34 1.8% None 1 0.1% Unknown 0 0.0%
blocked by ARMR today 477 25.4% partly blocked 4 0.2% not blocked 1,394 74.3% not established 0 0.0% unrecorded 0 0.0%
Exploited 85 4.5% Working exploit published 104 5.5% Proof of concept only 41 2.2% Forecast only 31 1.7% No public exploit 1,614 86.1%
split by peak 432 / year
No exploit published: 1,273Mitigation candidate: 120Rule in development: 1Protected by Waratek: 481 None: 1Low: 34Medium: 742High: 716Critical: 382 not blocked: 1,394partly blocked: 4blocked by ARMR today: 477 No public exploit: 1,614Forecast only: 31Proof of concept only: 41Working exploit published: 104Exploited: 85
20003 Mitigation candidate2 No exploit published1 Medium3 not blocked3 Working exploit published2 No public exploit1 20013 Mitigation candidate1 No exploit published2 High1 Medium2 not blocked3 Working exploit published1 No public exploit2 200212 Protected by Waratek1 Mitigation candidate6 No exploit published5 High3 Medium9 blocked by ARMR today1 not blocked11 Working exploit published6 No public exploit6 20037 Protected by Waratek1 Mitigation candidate2 No exploit published4 High1 Medium6 blocked by ARMR today1 not blocked6 Working exploit published3 No public exploit4 20041 No exploit published1 Medium1 not blocked1 No public exploit1 20059 Protected by Waratek1 Mitigation candidate1 No exploit published7 High1 Medium7 Low1 blocked by ARMR today1 not blocked8 Working exploit published2 No public exploit7 20065 Protected by Waratek3 Mitigation candidate2 High2 Medium3 blocked by ARMR today3 not blocked2 Exploited1 Working exploit published2 No public exploit2 200718 Protected by Waratek2 Mitigation candidate6 No exploit published10 High1 Medium14 Low3 blocked by ARMR today2 not blocked16 Working exploit published7 No public exploit11 20089 Protected by Waratek2 Mitigation candidate2 No exploit published5 Medium9 blocked by ARMR today2 not blocked7 Working exploit published4 No public exploit5 200918 Protected by Waratek3 Mitigation candidate6 No exploit published9 High2 Medium15 Low1 blocked by ARMR today3 not blocked15 Working exploit published8 No public exploit10 201020 Protected by Waratek4 Mitigation candidate5 No exploit published11 Critical1 High1 Medium15 Low3 blocked by ARMR today4 not blocked16 Working exploit published6 Forecast only1 No public exploit13 201120 Protected by Waratek1 Mitigation candidate2 No exploit published17 High2 Medium15 Low3 blocked by ARMR today1 not blocked19 Working exploit published2 No public exploit18 201237 Protected by Waratek2 Mitigation candidate7 No exploit published28 Critical1 High2 Medium33 Low1 blocked by ARMR today2 not blocked35 Exploited1 Working exploit published7 No public exploit29 201334 Protected by Waratek8 Mitigation candidate8 No exploit published18 Critical1 High10 Medium23 blocked by ARMR today8 not blocked26 Exploited4 Working exploit published6 No public exploit24 201438 Protected by Waratek12 Mitigation candidate3 No exploit published23 High8 Medium27 Low3 blocked by ARMR today12 not blocked26 Exploited3 Working exploit published2 No public exploit33 201526 Protected by Waratek9 No exploit published17 High9 Medium17 blocked by ARMR today9 not blocked17 Working exploit published2 No public exploit24 201672 Protected by Waratek22 Mitigation candidate4 No exploit published46 Critical14 High31 Medium27 blocked by ARMR today21 partly blocked1 not blocked50 Exploited4 Working exploit published8 Proof of concept only1 Forecast only1 No public exploit58 2017150 Protected by Waratek43 No exploit published107 Critical36 High73 Medium41 blocked by ARMR today41 partly blocked2 not blocked107 Exploited7 Working exploit published3 Forecast only1 No public exploit139 2018101 Protected by Waratek29 Mitigation candidate5 No exploit published67 Critical13 High44 Medium41 Low3 blocked by ARMR today29 not blocked72 Exploited5 Working exploit published3 Proof of concept only1 No public exploit92 201991 Protected by Waratek28 Mitigation candidate5 No exploit published58 Critical13 High43 Medium34 Low1 blocked by ARMR today27 partly blocked1 not blocked63 Exploited6 Working exploit published4 Proof of concept only4 Forecast only2 No public exploit75 2020106 Protected by Waratek30 Mitigation candidate12 No exploit published64 Critical35 High37 Medium34 blocked by ARMR today30 not blocked76 Exploited10 Working exploit published6 Proof of concept only7 Forecast only4 No public exploit79 2021120 Protected by Waratek37 Rule in development1 Mitigation candidate6 No exploit published76 Critical38 High47 Medium34 Low1 blocked by ARMR today37 not blocked83 Exploited14 Working exploit published3 Proof of concept only2 Forecast only9 No public exploit92 2022148 Protected by Waratek58 Mitigation candidate6 No exploit published84 Critical40 High53 Medium53 Low2 blocked by ARMR today58 not blocked90 Exploited4 Working exploit published3 Proof of concept only8 Forecast only9 No public exploit124 2023137 Protected by Waratek42 Mitigation candidate6 No exploit published89 Critical41 High58 Medium37 Low1 blocked by ARMR today42 not blocked95 Exploited9 Working exploit published3 Proof of concept only4 Forecast only1 No public exploit120 2024137 Protected by Waratek26 Mitigation candidate12 No exploit published99 Critical35 High52 Medium49 Low1 blocked by ARMR today26 not blocked111 Exploited6 Working exploit published5 Proof of concept only4 Forecast only2 No public exploit120 2025121 Protected by Waratek32 Mitigation candidate6 No exploit published83 Critical20 High50 Medium50 Low1 blocked by ARMR today32 not blocked89 Exploited5 Working exploit published5 Proof of concept only3 Forecast only1 No public exploit107 2026432 Protected by Waratek85 Mitigation candidate5 No exploit published342 Critical94 High185 Medium143 Low9 None1 blocked by ARMR today85 not blocked347 Exploited6 Working exploit published1 Proof of concept only7 No public exploit418
200220052008201120142017202020232026
1,875 matches Sign in to download these CVEs as CSV or JSON, or to follow them in a feed. ‹ prev page 1 of 19 next ›
CVE Severity Published▾ Status Exploitation Description
CVE-2026-95664 Medium 2026-10-26 No exploit published No public exploit Improper Neutralization of Special Elements used in an Expression Language Statement ('Expression Language Injection') vulnerability in Apache Camel AWS2-s3 component. This issue affects Apache Camel: from 4.8.0 before 4.18.5, from 4.19.0 before 4.22.2. For the object it uploads, reads or deletes, the camel-aws2-s3 producer takes the key from the CamelAwsS3Key message header and falls back to the keyName option configured on the endpoint only when that header is absent. Since 4.8.0, AWS2S3Utils.determineKey() also passed the resulting value to the Simple language whenever it contained ${ or $simple{, so that a route could use a dynamic key, and the evaluation applied to a value taken from the header as well as to the configured option. The header is not route configuration, however: the aws2-s3 consumer sets CamelAwsS3Key on the exchanges it creates to the key of the object it read, that is, the name of the object in the bucket. In a route that does nothing more than consume from one aws2-s3 endpoint and produce to another, the name of each consumed object therefore reached the producer, and a name containing either marker was evaluated as an expression, although the route author never asked for any evaluation, and configuring keyName on the producer did not prevent it, because the header took precedence. A key that a route copied into the header from other message content was evaluated in the same way. Anyone able to choose the name of an object in a bucket that such a route consumes, typically a principal allowed to upload to that bucket, could therefore have Simple expressions of their choosing evaluated in the Camel process. The Simple language can read JVM system properties, environment variables and configuration properties, which commonly carry credentials, and, where camel-bean is on the classpath, invoke methods on beans in the registry. The evaluated result became the key the producer used, so reading a value back additionally required the ability to see object names in the destination bucket, while a method invocation took effect without it; together with the need to name an object in a consumed bucket, this is why the severity is assessed medium. The bucket name went through the same evaluation, but the consumer only ever places the bucket configured on its own endpoint in a bucket header, never a value derived from a remote object, so the bucket name was not reachable in this way. Releases before 4.8.0 used the key from the header as given and are not affected. Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.8.x to 4.17.x and 4.19.x to 4.21.x release lines reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. After upgrading, a key or bucket name supplied through a message header is used literally, so a route that put an unevaluated Simple expression in the CamelAwsS3Key or CamelAwsS3OverrideBucketName header must evaluate it in the route instead, for example with setHeader and simple(), or configure it as the keyName or bucketName option of the endpoint. For deployments that cannot upgrade immediately, do not let a key derived from an object name or from other untrusted message content reach an aws2-s3 producer unchecked: in routes that pass exchanges from an aws2-s3 consumer to an aws2-s3 producer, either remove the CamelAwsS3Key header before the producer with removeHeader(“CamelAwsS3Key”), so that the keyName configured on the endpoint is used, or reject exchanges whose CamelAwsS3Key header contains ${ or $simple{. Configuring keyName alone is not a workaround, because the header takes precedence over it. As defence in depth, allow only trusted principals to write to buckets that Camel routes consume.
CVE-2026-95663 Medium 2026-10-26 No exploit published No public exploit Insufficient Session Expiration vulnerability in Apache Camel Keycloak component. This issue affects Apache Camel: from 4.16.0 before 4.18.5, from 4.19.0 before 4.22.2. When token introspection is enabled on the camel-keycloak KeycloakSecurityPolicy (useTokenIntrospection=true), the security processor validates the access token of a request by sending it to Keycloak's OAuth 2.0 token introspection endpoint, and accepts the token while the response reports it as active. The introspection endpoint reports a token as inactive once its exp (expiration) time has passed, so on this path the active flag is what enforces token expiry. Introspection results are cached by default (introspectionCacheEnabled=true, introspectionCacheTtl=60 seconds), and both cache implementations shipped with the component, ConcurrentMapTokenCache and CaffeineTokenCache, expired an entry a fixed time after it was inserted, without bounding that lifetime by the exp claim that the cached response already carried. KeycloakSecurityProcessor in turn checked only the active flag of the result, on every path that uses introspection, and never compared exp with the current time. A response cached shortly before the token expired was therefore served to later requests carrying the same token for up to the configured time-to-live after the token's expiry, and those requests were admitted with the roles and permissions the expired token had carried, although RFC 7662, which defines token introspection, states that a response containing exp must not be cached beyond that time. The access token is supplied by the caller with each request, typically as a bearer token in the Authorization header, so a caller holding a token that was valid moments earlier could keep using it after it expired, for as long as the cached entry lived. The window is bounded by introspectionCacheTtl, which is 60 seconds by default and 300 to 600 seconds where the documentation's recommendation for internal services was followed, and it opens only for a token that the same Camel process introspected and cached while the token was still active. The issue grants nothing beyond what the token already carried: it allows no token forgery and no privilege escalation, and token introspection is not enabled by default, which is why the severity is assessed medium. The local JWT verification path, used when introspection is disabled, is not affected by this issue. Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.16.x, 4.17.x and 4.19.x to 4.21.x release lines reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. For deployments that cannot upgrade immediately, set introspectionCacheEnabled=false on the KeycloakSecurityPolicy, so that every request is checked against the introspection endpoint, which reports an expired token as inactive, at the cost of one introspection call per request. Lowering introspectionCacheTtl only narrows the window and does not close it.
CVE-2026-95629 Medium 2026-10-26 Protected by Waratek No public exploit Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Camel Docling component. This issue affects Apache Camel: from 4.15.0 before 4.18.5, from 4.19.0 before 4.22.2. DoclingProducer runs the external docling tool in CLI mode, the default, and tells it where to write the converted document through the --output flag. When the CamelDoclingOutputFilePath header was set, addOutputDirectoryArguments handed its value to that flag verbatim: the value was not normalized, an absolute path or a path containing .. segments was accepted as given, and no endpoint option could confine it to a directory. The custom-argument validation added by the fix for CVE-2026-40047 refuses the --output and -o flags in the CamelDoclingCustomArguments header and tells callers to choose the output directory with this header instead, so the one value that decides where docling writes reached the command line without any of the checks applied to custom arguments. Docling writes the conversion result, as Markdown, HTML, JSON or text, into that directory, naming the file after the input file, and the producer afterwards removes only its own temporary directory, so the file is left in place. A party able to set the header could therefore have conversion output created in any directory the Camel process can write to. The content of such a file is the conversion of the document carried by the message, so it is shaped by whoever supplies that document without being written byte for byte, and when the document content arrives in the message body the producer stores it under a random temporary name, which the output file then carries. The header belongs to the Camel header namespace, which consumers applying Camel's default header filtering, such as the JMS and Kafka consumers, remove from incoming messages, so the issue is reached where a route forwards externally influenced values into the header or where a consumer maps incoming headers without that filtering. The docling-serve mode does not use the header. Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The fix adds an outputBaseDirectory endpoint option that is unset by default, so after upgrading, set it on every docling endpoint whose CamelDoclingOutputFilePath header can carry a value influenced from outside the deployment; without it the header is normalized but can still name any directory. The 4.15.x to 4.17.x and 4.19.x to 4.21.x release lines reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. For deployments that cannot upgrade immediately, do not build the CamelDoclingOutputFilePath header from values that originate outside the deployment, remove that header from messages that arrive from outside before they reach a docling endpoint, and make sure that consumers which map incoming message headers drop the Camel header namespace, so that only the route itself chooses the output directory.
CVE-2026-95628 Medium 2026-10-26 Protected by Waratek No public exploit Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Camel Docling component. This issue affects Apache Camel: from 4.15.0 before 4.18.5, from 4.19.0 before 4.22.2. DoclingProducer builds the command line of the external docling tool and appends to it the custom arguments supplied in the CamelDoclingCustomArguments header, a list of strings whose flags the fix for CVE-2026-40047 restricted to an allowlist. That fix also introduced validatePathSafety to keep path-like argument values inside the intended directory, but the method only looked for relative traversal: it rejected a value containing a traversal sequence such as ../ and a value whose normalized form still held a .. element. It never checked whether a value was an absolute path, and an absolute path without traversal segments contains neither, so it passed unchanged. Every path-like value went through this check, whether it was a separate list element following its flag or was attached to the flag after an equals sign, so an absolute path was accepted in either form, for example as the directory given to the allowlisted --artifacts-path flag, which tells docling where to find its model artifacts. Such a value reached the docling command line as given, so a party able to choose the custom arguments could point the docling process at any directory the Camel process can access, outside the working directory that the check was meant to keep path values in, which is the outcome the CVE-2026-40047 fix set out to prevent. Only the CLI mode, which is the default, passes custom arguments to docling. The header belongs to the Camel header namespace, which consumers applying Camel's default header filtering, such as the JMS and Kafka consumers, remove from incoming messages, so the issue is reached where a route forwards externally influenced values into the header or where a consumer maps incoming headers without that filtering. Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.15.x to 4.17.x and 4.19.x to 4.21.x release lines reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. For deployments that cannot upgrade immediately, do not build the CamelDoclingCustomArguments header from values that originate outside the deployment, remove that header from messages that arrive from outside before they reach a docling endpoint, and make sure that consumers which map incoming message headers drop the Camel header namespace, so that only the route itself chooses the custom arguments.
CVE-2026-101259 Medium 2026-10-26 No exploit published No public exploit Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel CoAP component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.2. When the CoAP consumer could not build its response once the route had completed, CamelCoapResource caught the resulting exception and sent its message back to the CoAP client as the payload of a 5.00 Internal Server Error response. The typical case is a type conversion failure: the consumer converts the final message body to the byte[] payload, and the CamelCoapMaxAge and CamelCoapETag headers to their types, after the route has returned, and therefore outside the route's error handler. On the affected releases the message of such a failure names the class of the value being converted, carries the value's string form, and ends with the class name and message of the underlying cause, so a remote CoAP client could read internal detail about the deployment: class and package names, the string form of the value, such as the path of a file body, and whatever the cause carries, which in practice can include paths, host names and connection detail of a backend. The consumer had no option to suppress this, unlike the HTTP consumers, which offer a muteException option for that purpose. The exception raised by a failing route was not sent: the consumer did not check whether the exchange had failed, and answered a route failure with 2.05 Content and whatever body the message held at that point. Reaching the disclosure therefore requires a route whose completed response a remote client can make unconvertible, which depends on how the route is written. Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.14.x releases stream and earlier, and the 4.15.x to 4.17.x and 4.19.x to 4.21.x release lines, reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. The upgrade is enough on its own: the new muteException consumer option defaults to true on all three fixed release lines, so the error response carries no payload without any configuration change. For deployments that cannot upgrade immediately, make sure the response can always be built once the route has completed: convert the body to byte[] or String as the last step of each route that consumes from a coap endpoint, for example with convertBodyTo, give the CamelCoapMaxAge and CamelCoapETag headers only values of their own types, and add an onException handler that marks the failure as handled and sets the response body explicitly, so that a conversion failure is raised and replaced inside the route rather than in the consumer.
CVE-2026-88900 High 2026-10-19 Protected by Waratek No public exploit Deserialization of Untrusted Data vulnerability in Apache Camel Camel-Jgroups component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. JGroupsEndpoint.createExchange(Message), which CamelJGroupsReceiver calls for every message the jgroups consumer receives before the exchange is routed, set the exchange body from org.jgroups.Message.getObject(). For an ObjectMessage, which is the message type the Camel jgroups producer sends, JGroups Java-deserializes the payload through an ObjectInputStream on its own receive thread as the message arrives, and getObject() returns the resulting object. No java.io.ObjectInputFilter was applied on that path unless the deployment had set a JVM-wide serialization filter: camel-jgroups installed none, and the JGroups versions shipped with the affected releases apply none of their own, so any serializable class on the application classpath could be instantiated and its deserialization callbacks run. Unless a channel or the channelProperties option is configured, the consumer creates its channel with new JChannel(), the stock JGroups protocol stack, which multicasts over UDP without the AUTH protocol and without encryption, so any host able to reach the cluster's multicast group or bind port can join the cluster and send messages to the consumer without credentials. Such a host could send a crafted serialized object that leads to remote code execution in the Camel process when a usable deserialization gadget chain is present on the classpath, and no non-default option was required on the consumer. Because JGroups materializes the object before Camel's receiver runs, a check performed by Camel can only inspect the deserialized result and cannot stop code that runs during deserialization, so closing the issue also requires a control that applies before the payload is read, as described in the mitigation. Exploitation requires network access to the cluster's multicast group or bind port, which with the default UDP multicast transport means a host on an adjacent network, and a usable gadget chain on the classpath, which is why the severity is assessed as high rather than critical. Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.1. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.14.x releases stream and earlier, and the 4.15.x to 4.17.x and 4.19.x to 4.21.x release lines, reached end of life before this issue was resolved and will not receive a fix, so deployments on those lines must move to a supported release.
CVE-2026-85317 Medium 2026-10-19 No exploit published No public exploit Use of Cache Containing Sensitive Information vulnerability in Apache Camel HTTP component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. The OAuth2 client token cache is global to the JVM, and its key omitted several of the fields that determine what a token actually authorises: the requested scope, the resource indicator, and the token endpoint the token was obtained from. Two endpoints differing only in those fields therefore shared a cache entry, and an endpoint could be served a token minted for a different scope, a different resource, or by a different authorization server. The consequence is a request carrying broader authority than the endpoint was configured for, or a token presented to a party it was not issued for. Reaching it requires a deployment that configures more than one OAuth2 endpoint differing in exactly those fields, which is why the severity is assessed low. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The cache key now includes every field that shapes the token, so entries are no longer shared between endpoints that differ in any of them. For deployments that cannot upgrade immediately, run endpoints that differ in scope, resource indicator or token endpoint in separate JVMs so that they do not share the cache.
CVE-2026-85316 Medium 2026-10-19 No exploit published No public exploit Insufficient Granularity of Access Control vulnerability in Apache Camel Platform HTTP component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. The component decided whether an endpoint ran in proxy mode by testing whether its configured path started with the string proxy, rather than by matching the path exactly. Any endpoint whose path merely begins with those characters - proxyStatus, proxy-config, proxying and so on - therefore became a proxy endpoint without the route author asking for it. A proxy endpoint forwards requests onward, so an endpoint that was intended to serve its own content instead relays traffic on behalf of whoever calls it, which is both a request forgery primitive and an exposure of whatever the forwarding path can reach. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. Proxy mode is now selected by an exact path match rather than by prefix. For deployments that cannot upgrade immediately, rename any endpoint path that begins with proxy but is not intended to be a proxy.
CVE-2026-85315 Medium 2026-10-19 No exploit published No public exploit Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel gRPC component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. When a route behind a gRPC consumer failed, the exception's message was placed into the gRPC status description. Unlike the status cause, which stays local to the server, the description is transmitted to the calling client, so an external caller able to provoke a failure could read the internal error message. What that discloses depends on the exception, and in practice includes class and package names, paths, host names and connection detail carried in messages. This is the gRPC member of the same unmuted-consumer-exception family as the knative, mina and CXF advisories published alongside it. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. A muteException consumer option, defaulting to true, puts a generic description in the status instead of the route exception's message. Set muteException=false to restore the previous output. For deployments that cannot upgrade immediately, map failures onto an explicit status in an onException handler so the framework never copies the exception message into the description.
CVE-2026-85314 Medium 2026-10-19 No exploit published No public exploit Improper Input Validation vulnerability in Apache Camel Mail component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. CVE-2026-46584 addressed mail headers reaching the Exchange without passing through a header filter, but the MimeMultipart data format retained an unfiltered path: unmarshalling a multipart message mapped mail.smtp headers onto the Exchange with no filter applied. Those names sit outside the Camel namespace that consumer filters block, so a message crafted by an external sender could still set them, and the mail.smtp namespace influences how a downstream mail producer connects and sends. This is an incomplete fix of CVE-2026-46584 rather than a new class of defect: a deployment that applied that advisory and considered camel-mail settled remained exposed on this path. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The MimeMultipart data format now applies the header filter on unmarshal, closing the path CVE-2026-46584 left open. For deployments that cannot upgrade immediately, strip the namespace after the data format with removeHeaders("mail.smtp*") before any mail producer.
CVE-2026-85313 Medium 2026-10-19 No exploit published No public exploit Permissive Cross-domain Policy with Untrusted Domains vulnerability in Apache Camel Jetty component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. Setting enableCORS on a Jetty endpoint installed Jetty's CrossOriginFilter with its stock defaults, which accept every origin and allow credentials. An operator asking for CORS therefore obtained a policy that lets a page on any origin make credentialed cross-origin requests to the endpoint and read the responses, without any indication that turning the option on had chosen an allow-all policy rather than an empty one to be filled in. This is the same defect class as the platform-http-vertx advisory published alongside it, in a different component. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. enableCORS no longer grants credentials to an origin the operator did not name. A deployment that relied on any origin being accepted must now list its origins explicitly. For deployments that cannot upgrade immediately, configure the CrossOriginFilter parameters explicitly rather than relying on what enableCORS installs, naming the allowed origins.
CVE-2026-85312 Medium 2026-10-19 No exploit published No public exploit Improper Input Validation vulnerability in Apache Camel Core component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. The saga processor consulted a header named Long-Running-Action to decide which saga an exchange belonged to. The name carries no Camel prefix, so it sits outside the namespace that consumer header filters block, and an external sender could supply it on an inbound message. That let the sender name the saga the exchange joined, attaching their request to a long-running action started by someone else, or causing compensation to be associated with an action they did not initiate. The header is only consulted by a saga service that uses it, which bounds the exposure to deployments running sagas over an LRA coordinator. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The header is now consulted only for a saga service that actually uses it, rather than on every exchange. For deployments that cannot upgrade immediately, strip the header at the trust boundary with removeHeaders("Long-Running-Action") on every consumer that accepts messages from an untrusted sender.
CVE-2026-85296 Medium 2026-10-19 No exploit published No public exploit Exposure of Data Element to Wrong Session vulnerability in Apache Camel AS2 component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. Signing material belonging to an individual request was stored in state that is shared across requests rather than confined to the request being processed. Where a deployment serves more than one trading partner, concurrent or successive requests could therefore observe each other's material, and a Message Disposition Notification could be signed with the key of a partner other than the one the receipt was for. The result is cross-partner key confusion: a receipt attributable to the wrong partner, and one partner's signing material used while handling another partner's exchange. AS2 deployments are typically multi-partner by design, so the condition is reached by ordinary concurrent traffic rather than by anything the attacker must arrange. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. Per-request signing keys are now confined to the request being processed in ResponseMDN. For deployments that cannot upgrade immediately, run a separate Camel context per trading partner so that no signing material is shared between them.
CVE-2026-85260 Medium 2026-10-19 No exploit published No public exploit Insertion of Sensitive Information into Log File vulnerability in Apache Camel MLLP component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. The camel-mllp component carries a logPhi option that governs whether HL7 payload content may be written to the log. It defaulted to true, so a deployment that did nothing logged protected health information out of the box. Two further paths wrote payload content to the log regardless of the setting, so even an operator who had turned logPhi off was still exposed on those paths. MLLP is used to carry HL7 clinical messages, so the content concerned is patient data, and it reached ordinary application logs where it is subject to whatever retention, aggregation and access the deployment applies to logs generally rather than to clinical records. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. logPhi now defaults to false and is honoured on the paths that previously ignored it. This is a changed default: a deployment that relied on payload logging must now set logPhi=true explicitly. Because the upgrade guide for a change like this lives on the main branch only, operators upgrading within the 4.18.x or 4.22.x lines should treat this advisory as the notice of that change. For deployments that cannot upgrade immediately, set logPhi=false and be aware that two paths will continue to log payload content until the fix is applied; restrict access to the logs accordingly.
CVE-2026-85257 Medium 2026-10-19 No exploit published No public exploit Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel CXF component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. When a route behind a CXF SOAP consumer failed with an exception the service contract does not declare, the exception was described back to the SOAP client in the fault: CXF copies the message into the SOAP faultstring, and can be configured to place the stack trace in the fault detail. An external caller able to provoke a failure could therefore read internal detail about the deployment - class and package names, and whatever the exception message carries. Declared faults, annotated @WebFault, are a different matter: those are part of the published contract that clients are written against, and suppressing them would break the service rather than protect anything. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. A muteException consumer option, defaulting to true, replaces an undeclared route failure with a generic fault carrying no class name, message or stack trace. Faults the contract declares are reported exactly as before. Set muteException=false to restore the previous output. For deployments that cannot upgrade immediately, declare the exceptions the service is allowed to report and map every other failure onto one of them in an onException handler, so no undeclared exception reaches the fault.
CVE-2026-85254 Medium 2026-10-19 No exploit published No public exploit Improper Handling of Case Sensitivity vulnerability in Apache Camel Platform HTTP component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. The guard that prevents a request header being reflected into the response compared header names case sensitively, while HTTP header names are case insensitive. A caller could therefore defeat the suppression simply by varying the case of the header name. HTTP/2 makes the problem unconditional rather than optional: the protocol requires header names to be lowercase on the wire, so the comparison never matched and the suppression was inert for every request on an HTTP/2 connection. The consequence is that content the caller chose is echoed back in the response, which is the basis for response-splitting and cache-poisoning style attacks against whatever sits in front of the Camel endpoint. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. Request header names are now compared case insensitively, so the suppression holds regardless of casing and works under HTTP/2. For deployments that cannot upgrade immediately, strip the headers in question in front of the Camel endpoint, or remove them from the response in the route rather than relying on the built-in suppression.
CVE-2026-85251 High 2026-10-19 No exploit published No public exploit Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache Camel HTTP component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. Two paths handed credentials to a redirect target, which is a host chosen by the remote server rather than by the route, once followRedirects=true. OAuth2ClientConfigurer registers its interceptor with addRequestInterceptorFirst, and HttpClient runs protocol-level request interceptors inside ProtocolExec, which sits below RedirectExec in the exec chain; the interceptor therefore ran again for every redirect hop and re-attached Authorization: Bearer to whatever host the Location header named. Separately, credentials were registered against an AuthScope matching any host, so basic and digest credentials were presented to a redirect target as well. A remote endpoint - or anyone who can influence its responses - could therefore collect the bearer token or the configured credentials simply by answering with a redirect to a host it controls. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. Credentials are now sent only to the authority the endpoint was configured with, and are not re-attached when a redirect crosses to another host. For deployments that cannot upgrade immediately, set followRedirects=false on endpoints that carry credentials, and handle any redirect explicitly in the route so that the destination is chosen by the route rather than by the remote server.
CVE-2026-85250 High 2026-10-19 Protected by Waratek No public exploit Improper Restriction of XML External Entity Reference vulnerability in Apache Camel XPath component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. With documentType set to InputSource, XPathBuilder handed the payload straight to javax.xml.xpath, which builds a DocumentBuilder of its own using the JDK defaults. The hardening applied to Camel's default document type was therefore bypassed: a DOCTYPE declaration that is refused on the default type was accepted here, and the external entity it declared was resolved and expanded into the evaluated document. An external sender whose XML reaches such an expression could read files readable by the Camel process and cause the process to issue requests to hosts it names. The two document types disagreeing on parser configuration is what made this reachable, since a deployment choosing InputSource for streaming reasons had no indication it was also choosing a weaker parser. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The InputSource document type now goes through the same hardened parser as the default type, so a DOCTYPE is refused. Note that it also shares that type's documented escape hatch: the same DocumentBuilderFactory system properties that relax the default type relax this one, so a deployment that has set them remains unprotected by design. For deployments that cannot upgrade immediately, do not use documentType=InputSource on expressions evaluated over untrusted XML; the default document type already refuses a DOCTYPE.
CVE-2026-85249 Medium 2026-10-19 No exploit published No public exploit Improper Input Validation vulnerability in Apache Camel Tika component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. The Tika producer mapped every metadata key parsed out of the submitted document onto the Exchange as a header, with no filter applied. Document metadata is attacker-controlled content: the party that supplies the file chooses the metadata keys it carries. A crafted document could therefore set Exchange headers that the rest of the route depends on, including headers in the Camel namespace such as CamelFileName, which downstream components use to decide where content is written. The pattern is the same header-injection class as the consumer advisories published previously, reached here through parsed file content rather than through a protocol header. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. Parsed document metadata is now filtered through a HeaderFilterStrategy before it is mapped onto the Exchange. A route that was reading a metadata-derived header the filter now blocks will see it missing. For deployments that cannot upgrade immediately, strip the Camel namespace after the Tika producer with removeHeaders("Camel*") before any component that acts on those headers.
CVE-2026-85247 Medium 2026-10-19 No exploit published No public exploit Improper Certificate Validation vulnerability in Apache Camel Knative component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. When SSL was enabled on the Knative HTTP client but no truststore was configured, the client options fell back to trusting every presented certificate rather than to the JVM's default trust anchors. A deployment that switched TLS on without also configuring a truststore therefore obtained an encrypted connection with no peer authentication, which an attacker positioned on the network path can terminate and read. The dangerous state is reached by omission rather than by an explicit opt-in, which is what makes it a framework defect: turning TLS on should not be the thing that turns certificate validation off. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. With no truststore configured the trust options are now left unset so the JVM default trust anchors apply, the same fallback SSLContextParameters and the rest of Camel use. Trusting every certificate is now reached only by asking for it explicitly through the trust.all property, which remains available for development against a cluster with a self-signed certificate. For deployments that cannot upgrade immediately, configure a truststore explicitly wherever SSL is enabled. After upgrading, a deployment that was relying on the implicit trust-all behaviour must either configure a truststore or set the trust.all property deliberately.
CVE-2026-85246 Medium 2026-10-19 No exploit published No public exploit Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel Mina component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. When processing of an exchange failed, the Mina consumer wrote exchange.getException() straight back over the socket to the remote peer. Over a textline codec that hands the peer the exception's class name and message; over the object codec it hands over the serialised exception, cause chain included. A remote peer able to provoke a failure could therefore read internal detail about the deployment - class and package names, and whatever a message or nested cause happens to carry, which in practice can include paths, host names and connection detail. The consumer had no option to suppress this, unlike the HTTP-family consumers aligned by CAMEL-23651. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. A muteException consumer option, defaulting to true, replaces the route exception with a generic one carrying no class name, message or stack trace, while still writing a reply so that a synchronous peer is not left to time out. Set muteException=false to restore the previous behaviour. For deployments that cannot upgrade immediately, add an onException handler that sets the reply body explicitly, so the framework never writes the exception back to the peer.
CVE-2026-85245 Medium 2026-10-19 Protected by Waratek No public exploit Exposure of Data Element to Wrong Session vulnerability in Apache Camel Thrift component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. The Thrift data format unmarshalled incoming data into the shared defaultInstance of the target type rather than into a fresh copy, and returned that shared object as the exchange body. Because the instance is shared process-wide, state written while unmarshalling one message stayed on the object and was visible to every later message that used the same type. Fields absent from a later payload retained the previous message's values, so content belonging to one sender could be read while processing another sender's message, and concurrent exchanges could observe each other's partially written state. In a deployment that serves more than one tenant or user through the same route, that is disclosure of one party's data to another. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. Unmarshalling now deserializes into a copy, so each exchange gets its own instance and no state carries between messages. For deployments that cannot upgrade immediately, copy the unmarshalled body into a new instance immediately after the data format runs, and do not retain references to the returned object.
CVE-2026-85243 Medium 2026-10-19 No exploit published No public exploit Improper Validation of Integrity Check Value vulnerability in Apache Camel Crypto PGP component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. unmarshal() verified the modification detection code only when the message was an OpenPGP symmetrically encrypted integrity protected data packet. The older symmetrically encrypted data packet carries no such code, and OpenPGP's CFB mode is malleable without one, so a message using that packet skipped the check altogether. The packet type is chosen by whoever produced the message, which left the sender - or anyone able to rewrite the message in transit - deciding whether the integrity check applied at all. The existing integrity option governs marshalling only and had no decrypt-side counterpart, so a deployment could not require integrity protection on the messages it accepted. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. A requireIntegrityProtection option, defaulting to true, now rejects a message that is not integrity protected. Note that signatureVerificationOption still defaults to optional, so a message carrying no signature is accepted; the two options together are what give a decrypted message authenticity and not only confidentiality. For deployments that cannot upgrade immediately, reject messages that do not use the integrity protected packet before they reach the data format. Routes that must interoperate with a sender still emitting the legacy packet should set requireIntegrityProtection=false after upgrading, and treat the decrypted content as unauthenticated.
CVE-2026-84181 Medium 2026-10-19 No exploit published No public exploit Improper Authentication vulnerability in Apache Camel Shiro component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. The Shiro security processor skipped credential verification when the subject already bound to the current thread carried the same principal as the incoming exchange. Because the thread that carries a Camel exchange is drawn from a pool and reused across exchanges, a subject left bound by an earlier authenticated exchange could satisfy the check for a later one that presented no valid credentials of its own. The password on the incoming exchange was, in that case, never verified. The condition depends on thread reuse and on the principal matching, which is why it is not reached on every request, but it requires nothing of the attacker beyond sending a request naming a principal that is in active use. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The processor now verifies the presented credentials on every exchange rather than accepting a subject already bound to the thread. Setting alwaysReauthenticate=false restores the previous behaviour for deployments that depend on it. For deployments that cannot upgrade immediately, ensure the Shiro subject is cleared from the thread at the end of every exchange so that no subject can be inherited by a later one.
CVE-2026-84180 Medium 2026-10-19 No exploit published No public exploit Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel Knative component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. When processing of an exchange failed on the consumer side, the Knative HTTP consumer wrote the resulting exception back to the remote caller as the response body, including its class name, message and stack trace. An external sender could therefore provoke a failure and read internal detail about the deployment: class and package names, file system or host names carried in exception messages, and the shape of the route. That detail is useful for building a more targeted attack, and where an exception message embeds configuration or connection strings it is disclosure in its own right. camel-knative was the remaining HTTP-family consumer that had not been aligned with the muteException behaviour established for the other HTTP consumers by CAMEL-23651. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The consumer now honours a muteException option that defaults to true, so a route failure returns an empty body with the error status rather than the exception. Set muteException=false to restore the previous output. For deployments that cannot upgrade immediately, add an onException handler that sets the response body explicitly, so that the framework never writes the exception back to the caller.
CVE-2026-84176 Medium 2026-10-19 No exploit published No public exploit Permissive Cross-domain Policy with Untrusted Domains vulnerability in Apache Camel Platform HTTP Vertx component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. createCorsHandler() set Access-Control-Allow-Credentials: true outside the origin check, so the header went out on every response to a request carrying an Origin header, including responses to origins the handler had just decided not to allow. When camel.server.cors.origins is unset, the handler treats every origin as allowed and echoes the caller's own Origin back as Access-Control-Allow-Origin. Together those produce the credentialed any-origin configuration that the fetch specification refuses to express as a literal wildcard, which is precisely why reflecting the origin is the usual way around that rule. A page on any origin could therefore make credentialed cross-origin requests to the Camel endpoint and read the responses. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. Access-Control-Allow-Credentials is now sent only when the request origin matched an origin the operator actually configured. With no origin list the origin is still reflected, as before, but credentials are not granted, and Vary: Origin is now set whenever the origin is reflected so that a shared cache cannot serve one origin's response to another. For deployments that cannot upgrade immediately, set camel.server.cors.origins to the explicit list of origins that need access rather than leaving it unset.
CVE-2026-80344 High 2026-10-19 No exploit published No public exploit Server-Side Request Forgery (SSRF) vulnerability in Apache Camel AS2 component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. In the AS2 protocol the sender of a message may request that the Message Disposition Notification be returned asynchronously to an address the sender supplies. camel-as2 took that address from the inbound message and used it as the destination for the outgoing receipt without constraining it to anything the deployment had configured. A remote partner therefore chose the host the Camel instance would connect to when delivering the MDN. That gives server-side request forgery from the position of the AS2 receiver, including reaching hosts that are only routable from inside the deployment's network, and where the outbound connection carries credentials configured for MDN delivery those credentials are presented to the attacker-chosen destination. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The asynchronous MDN destination is now constrained rather than taken verbatim from the inbound message. For deployments that cannot upgrade immediately, restrict outbound connectivity from the AS2 receiver to the partner endpoints it legitimately delivers receipts to, and do not attach credentials to MDN delivery that are valid for any host other than those partners.
CVE-2026-80343 High 2026-10-19 No exploit published No public exploit Improper Handling of Case Sensitivity vulnerability in Apache Camel Netty HTTP component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. The camel-netty-http security constraint compared the request path against the configured context path using a case-sensitive match, while the routing that dispatches the request to the endpoint did not apply the same rule. The two comparisons therefore disagreed for any path whose case differed from the configured value. An external caller could alter the case of a character in a path segment so that the security constraint no longer recognised the path as protected, while the request still dispatched to the same endpoint. The result is that the constraint is skipped and the protected route is reached without satisfying it. No credential, prior access or special configuration is required beyond being able to send a request to the consumer. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The constraint now matches the request path with the same case rules the dispatch uses, so the two can no longer disagree. For deployments that cannot upgrade immediately, place the authorization decision in front of the Camel consumer, for example in a reverse proxy that normalises the request path before forwarding.
CVE-2026-79986 Critical 2026-10-19 Protected by Waratek Proof of concept only Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Camel Azure Files component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. The Camel remote-file consumers poll a directory on a remote server and build the absolute remote path of each file by concatenating the configured directory with the file name reported in the server's directory listing. That concatenation (FtpUtils.absoluteFilePath and GenericFileConsumer) applied no lexical normalization and no check that the result stayed inside the directory being polled, and the resulting path became the operand for every subsequent remote operation on the file: retrieval (FtpOperations.retrieveFile / SftpOperations, reached from GenericFileConsumer where the retrieve name is taken verbatim from GenericFile.getAbsoluteFilePath), deletion when delete=true (GenericFileDeleteProcessStrategy), and renaming when move, preMove, moveFailed or readLock=rename is configured (GenericFileProcessStrategySupport and GenericFileRenameExclusiveReadLockStrategy). Neither isValidFile nor isMatched performed any containment check. A listing entry that is not a single path segment therefore resolved to a path outside the configured polling directory, causing Camel to read, delete or rename files outside it using the endpoint's own credentials. A listing name is not route-controlled data. It is supplied by the remote server, and the FTP control channel carries no integrity protection at all, so an on-path attacker can rewrite a LIST response without holding any credentials; a compromised, malicious or multi-tenant server, or a server backed by a virtual filesystem, can emit such a name directly. Retrieval is reachable in a default consumer configuration, since the remote consumers download every listed file; deletion and renaming additionally require one of the disposition options above, all of which are common. Escape from the directory Camel was configured to poll is unconditional, while escape from the server's own account boundary additionally depends on whether that server confines the account. The jailStartingDirectory option, which is documented as restricting Camel to the starting directory and is enabled by default, governed producer writes and, since the localWorkDirectory containment work, consumer downloads to the local work directory - but it did not constrain this remote operand, so its name and description claimed a boundary that was not enforced here. The same entry point had already been recognised on the local side: the localWorkDirectory download path was constrained so that a remote file name containing parent-directory segments could not resolve outside the local work directory. The remote operand was the remaining half of that surface. This artifact provides the azure-files scheme. Its consumer derives from the same RemoteFileConsumer base class and composed the remote path through a plain concatenation helper, so it inherited the same unconstrained resolution. Reaching it requires a listing name that is not a single path segment, which the Azure Files REST service does not normally return; the exposure was corrected on the same basis as the other remote-file consumers rather than from a demonstrated proof of concept against this scheme. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.22.x releases stream should upgrade to 4.22.1. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. The 4.14.x stream reached end of life and does not receive this fix; users on it should move to a supported releases stream.
CVE-2026-79983 Critical 2026-10-19 Protected by Waratek Proof of concept only Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Camel FTP component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. The Camel remote-file consumers poll a directory on a remote server and build the absolute remote path of each file by concatenating the configured directory with the file name reported in the server's directory listing. That concatenation (FtpUtils.absoluteFilePath and GenericFileConsumer) applied no lexical normalization and no check that the result stayed inside the directory being polled, and the resulting path became the operand for every subsequent remote operation on the file: retrieval (FtpOperations.retrieveFile / SftpOperations, reached from GenericFileConsumer where the retrieve name is taken verbatim from GenericFile.getAbsoluteFilePath), deletion when delete=true (GenericFileDeleteProcessStrategy), and renaming when move, preMove, moveFailed or readLock=rename is configured (GenericFileProcessStrategySupport and GenericFileRenameExclusiveReadLockStrategy). Neither isValidFile nor isMatched performed any containment check. A listing entry that is not a single path segment therefore resolved to a path outside the configured polling directory, causing Camel to read, delete or rename files outside it using the endpoint's own credentials. A listing name is not route-controlled data. It is supplied by the remote server, and the FTP control channel carries no integrity protection at all, so an on-path attacker can rewrite a LIST response without holding any credentials; a compromised, malicious or multi-tenant server, or a server backed by a virtual filesystem, can emit such a name directly. Retrieval is reachable in a default consumer configuration, since the remote consumers download every listed file; deletion and renaming additionally require one of the disposition options above, all of which are common. Escape from the directory Camel was configured to poll is unconditional, while escape from the server's own account boundary additionally depends on whether that server confines the account. The jailStartingDirectory option, which is documented as restricting Camel to the starting directory and is enabled by default, governed producer writes and, since the localWorkDirectory containment work, consumer downloads to the local work directory - but it did not constrain this remote operand, so its name and description claimed a boundary that was not enforced here. The same entry point had already been recognised on the local side: the localWorkDirectory download path was constrained so that a remote file name containing parent-directory segments could not resolve outside the local work directory. The remote operand was the remaining half of that surface. This artifact provides the ftp, ftps and sftp schemes, all of which are affected. The reporter demonstrated the issue end to end against an ftp endpoint, driving a Camel route with a malicious server whose LIST response named a file outside the polled directory. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.22.x releases stream should upgrade to 4.22.1. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. The 4.14.x stream reached end of life and does not receive this fix; users on it should move to a supported releases stream.
CVE-2026-78162 Critical 2026-10-19 Protected by Waratek Proof of concept only Deserialization of Untrusted Data vulnerability in Apache Camel. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. The camel-hazelcast component applies a default Hazelcast JavaSerializationFilterConfig to the instances it creates from its own configuration, a protection introduced by CVE-2026-43865. That change did not reach two of the configuration paths Camel builds itself, so those paths continued to create Hazelcast instances whose Java deserialization is unrestricted. ReplicatedHazelcastAggregationRepository extends HazelcastAggregationRepository but overrides doStart() without calling super.doStart(), keeping its own copy of the bootstrap block, and therefore never received the filter: a route using it without supplying a hazelcastInstance starts a Hazelcast member that deserializes values read from the backing ReplicatedMap with no class restriction. HazelcastDefaultComponent#getOrCreateHzClientInstance() builds its own ClientConfig when hazelcastMode=client is selected and neither a referenced ClientConfig nor hazelcastConfigUri is supplied, and likewise applied no filter, so client-mode endpoints behaved differently from node-mode endpoints for an otherwise identical configuration. In both cases an attacker able to publish into the Hazelcast cluster that the affected instance is attached to can cause a serialized Java object of their choosing to be deserialized inside Hazelcast's own serialization layer, before Camel processes the exchange, resulting in remote code execution. Hazelcast clusters have neither authentication nor TLS enabled by default. Selecting client mode is a topology choice rather than a security option, so neither path required the deployment to opt in to unsafe behaviour. Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.1. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.14.x releases stream and earlier reached end of life before this issue was resolved and will not receive a fix, so deployments on those lines must move to a supported release. For deployments that cannot upgrade immediately, supply an explicit Hazelcast configuration carrying a JavaSerializationFilterConfig, or inject a pre-built HazelcastInstance, since a user-supplied configuration is never overwritten by Camel. Alternatively set the JVM-wide filter -Djdk.serialFilter=!java.net.;java.;javax.;org.apache.camel.;!* and enable Hazelcast cluster authentication and TLS to restrict who can reach the cluster.
CVE-2026-97791 High 2026-10-09 No exploit published No public exploit In Apache CXF, STSTokenValidator checks whether a SAML assertion is signed by a trusted certificate before deciding to send it to the STS. That result was stored in one object shared by all requests, so one request could read another's result. A remote, unauthenticated attacker could send a forged assertion signed with an untrusted certificate while legitimate requests were being processed, and it could be accepted as trusted without ever reaching the STS. Only services that use STSTokenValidator to validate SAML tokens without alwaysValidateToSts set are affected.  Users are recommended to upgrade to versions 4.2.4 or 4.1.9 or 3.6.13, which fix this issue.
CVE-2026-97468 Critical 2026-10-09 No exploit published No public exploit Apache CXF's STSTokenValidator and Security Token Service (STS) cached validated security tokens under a non-cryptographic 32-bit hash of the token (Java Arrays.hashCode/hashCode()), and treated a cache hit as proof that the presented token had already been validated. An attacker could craft a token (for example a UsernameToken or a self-signed SAML Assertion) whose hash collides with a cached entry. The token would then be accepted without password validation, signature trust verification or a call to the STS. This could let the attacker authenticate as another user and, through STS token validation or renewal, obtain STS-signed tokens for that identity. Users are recommended to upgrade to versions 4.2.4 or 4.1.9 or 3.6.13, which fix this issue.
CVE-2026-86463 High 2026-10-09 No exploit published No public exploit Apache CXF's FIQL query parser has a vulnerability in how it searches for operators in query expressions. The search pattern can get stuck trying many combinations when it encounters a long string without an operator, causing the parser to consume excessive CPU time. An attacker can send a crafted query to make the server use up CPU resources, potentially slowing down or stopping other requests. The fix was to limit FIQL expressions to 4 KiB by default, preventing attackers from sending extremely long inputs while still allowing normal queries. Users are recommended to upgrade to versions 4.2.4 or 4.1.9 or 3.6.13, which fix this issue.
CVE-2026-79650 Medium 2026-10-09 No exploit published No public exploit Apache CXF’s OIDC relying-party component could redirect users to an attacker-controlled URL after successful authentication. The issue occurs because attacker-controlled state parameters are preserved and later used as redirect targets without validating that the final decoded URI belongs to the RP’s origin. Both directly encoded and double-encoded external URLs can trigger the issue, depending on which validation path is used. Users are recommended to upgrade to versions 4.2.4 or 4.1.9 or 3.6.13, which fix this issue.
CVE-2026-78384 High 2026-10-09 No exploit published No public exploit CompressionUtils.inflate() decompressed attacker-controlled DEFLATE data with no output-size cap. A small (~KB) crafted payload could expand to gigabytes on the heap. Reachable via JWE decryption when zip=DEF (e.g. JoseSessionTokenProvider with RSA-OAEP key wrap) and via SAML redirect/POST binding token inflation — in both cases decompression happens before/independent of trust validation. Fix: Added a configurable maximum inflated-size cap (default 10 MiB, org.apache.cxf.compression-max-inflated-size system property) to CompressionUtils.inflate(); aborts with DataFormatException once exceeded. Users are recommended to upgrade to versions 4.2.4 or 4.1.9 or 3.6.13, which fix this issue.
CVE-2026-73179 High 2026-10-09 No exploit published No public exploit Improper enforcement of single-use authorization code semantics in the JPA OAuth2 authorization code grant provider in Apache CXFallows a remote attacker to obtain multiple valid access tokens from a single authorization code via concurrent token exchange requests that race the non-atomic find-then-delete operation against a shared relational database under READ_COMMITTED isolation. Users are recommended to upgrade to versions 4.2.4 or 4.1.9 or 3.6.13, which fixes this issue.
CVE-2026-71575 Critical 2026-10-09 No exploit published No public exploit The max_age authentication-freshness check in OidcClientCodeRequestFilter was inoperative due to a milliseconds/seconds unit mismatch and an inverted comparison polarity. Any relying party using setMaxAgeOffset to enforce re-authentication would silently accept sessions of any age, bypassing step-up authentication policies. Users are recommended to upgrade to versions 4.2.4 or 4.1.9 or 3.6.13, which fix this issue.
CVE-2026-108039 High 2026-10-09 No exploit published No public exploit By default, StaxUtils placed no limit on the total number of elements or the total number of characters in an XML document. A very large request could therefore use a lot of memory and CPU during parsing, especially where CXF builds a DOM from the input (for example SAAJ or WS-Security), and could cause a denial of service when no request size limit was configured. Both limits now have defaults: the maximum element count is 100 × maxChildElements (5,000,000 by default), and the maximum document size is 256M characters. Applications that process larger documents can raise the limits with the org.apache.cxf.stax.maxElementCount and org.apache.cxf.stax.maxXMLCharacters properties. Users are recommended to upgrade to versions 4.2.4 or 4.1.9 or 3.6.13, which fix this issue.
CVE-2026-107938 Critical 2026-10-09 No exploit published No public exploit In Apache CXF, the Netty-based HTTP client transport (cxf-rt-transports-http-netty-client) did not verify that the hostname in the server’s TLS certificate matched the host being called. This applied over both HTTP/1.1 and HTTP/2, even when disableCNCheck was left at its default value of false. The certificate chain was validated against the configured trust store, but the endpoint’s identity was not. A network attacker able to intercept traffic could present any certificate trusted by the client, such as a publicly issued certificate for a domain they control, and impersonate the target service. They could then read or modify the exchanged messages, including credentials.  Users are recommended to upgrade to versions 4.2.4 or 4.1.9 or 3.6.13, which fix this issue.
CVE-2026-107937 High 2026-10-09 No exploit published No public exploit In Apache CXF, the parser for multipart/MTOM attachment part headers did not fully enforce the configured attachment-max-header-size (default 300 characters) and attachment-headers-max-count (default 500) limits. The size limit was applied only to each physical line, not to a header value built from continuation lines or to the combined values of a repeated header. The count limit was checked against the number of distinct header names, not the total number of header lines. A remote, unauthenticated attacker could send a multipart request with very large folded or repeated part headers. The server would then allocate memory without bound, causing a denial of service.  Users are recommended to upgrade to versions 4.2.4 or 4.1.9 or 3.6.13, which fix this issue.
CVE-2026-100227 High 2026-10-09 No exploit published No public exploit Improper Verification of Cryptographic Signature vulnerability in Apache CXF's JAX-RS XML Security module. The JAX-RS XML Signature interceptors (XmlSigInHandler, XmlSigInInterceptor and the streaming XmlSecInInterceptor) did not ensure that the XML passed to the application was covered by the signature. An attacker with any document signed by a trusted key could wrap it in unsigned content, which the application would then treat as signed. Users are recommended to upgrade to versions 4.2.4 or 4.1.9 or 3.6.13, which fix this issue.
CVE-2026-92415 Medium 2026-10-07 Protected by Waratek No public exploit — Use of Externally-Controlled Input to Select Classes or Code vulnerability in Apache Jackrabbit's WebDAV/Davex client. A malicious WebDAV/DavEx server, or an attacker able to intercept the connection, can cause the client to instantiate arbitrary classes from its classpath, which can lead to arbitrary file creation or truncation. Only applications that use jackrabbit-spi2dav (directly or through jackrabbit-jcr2dav) to connect to a remote repository are affected. Jackrabbit servers are not affected. Category: unsafe reflection on wire data (HIGH). This issue affects Apache Jackrabbit: from 2.23.0 through 2.23.5, from 2.22.0 through 2.22.4, from 2.20.0 through 2.20.17. Users are recommended to upgrade to versions 2.23.6, 2.22.5, or 2.20.18 which fix the issue.
CVE-2026-92414 Critical 2026-10-07 No exploit published No public exploit : Session Fixation / Session Reuse across Users vulnerability in Apache Jackrabbit. Jackrabbit WebDAV server attaches a cached authenticated session on any Lock-Token/TransactionId/SubscriptionId/If-header field token match with no credential check. This issue affects Apache Jackrabbit: from 2.23.0 through 2.23.5, from 2.22.0 through 2.22.4, from 2.20.0 through 2.20.17. Users are recommended to upgrade to versions 2.23.6, 2.22.5, or 2.20.18 which fix the issue.
CVE-2026-104714 High 2026-10-05 No exploit published No public exploit Concurrent execution using shared resource with improper synchronization ('race condition') vulnerability in Apache Struts. Where a localized message formats a date or time argument, the formatter retained for that message by the application-wide text provider is used by concurrently served requests without isolation, so a value belonging to one user can appear in another user's response, or the rendering can fail and surface as a server error. Applications whose localized messages format no date or time arguments are not affected. This issue affects Apache Struts: from 2.0.0 through 2.3.37, from 2.5.0 through 2.5.33, from 6.0.0 through 6.11.0, from 7.0.0 through 7.3.0. Users are recommended to upgrade to version 6.12.0 or 7.4.0, which fixes the issue.
CVE-2026-104713 Medium 2026-10-05 No exploit published No public exploit Allocation of resources without limits or throttling vulnerability in the Apache Struts REST plugin. A request body is read into memory without any bound on how much will be accepted, so a single request can cause the server to allocate memory in proportion to its size, exhausting the Java heap and denying service to other users. No additional setting has to be enabled. Applications that do not use the REST plugin are not affected. This issue affects Apache Struts: from 2.1.8 through 2.3.37, from 2.5.0 through 2.5.33, from 6.0.0 through 6.11.0, from 7.0.0 through 7.3.0. Users are recommended to upgrade to version 6.12.0 or 7.4.0, which fixes the issue.
CVE-2026-104712 High 2026-10-05 No exploit published No public exploit Asymmetric resource consumption (amplification) vulnerability in Apache Struts. When a request parameter is bound to an arbitrary-precision decimal (java.math.BigDecimal) property that is then rendered through the Struts tag library, the framework can produce a response many orders of magnitude larger than the request, allowing an unauthenticated remote attacker to exhaust server CPU and outbound network capacity with sustained low-volume traffic. Applications that do not bind request parameters to BigDecimal properties, or never render such a property through the Struts tag library, are not affected. This issue affects Apache Struts: from 2.5.14 through 2.5.33, from 6.0.0 through 6.11.0, from 7.0.0 through 7.3.0. Users are recommended to upgrade to version 6.12.0 or 7.4.0, which fixes the issue.
CVE-2026-104711 Critical 2026-10-05 No exploit published No public exploit Improper neutralization of special elements used in an expression language statement ('Expression Language Injection') vulnerability in Apache Struts. If the application is configured to use the legacy RESTful action mapper, a crafted request can inject an OGNL expression that may lead to remote code execution. Struts 7 is affected only when the OGNL allowlist is disabled; it is enabled by default. Applications using the default action mapper, the restful2 mapper, or the Struts REST plugin are not affected. This issue affects Apache Struts: from 2.0.0 through 2.3.37, from 2.5.0 through 2.5.33, from 6.0.0 through 6.11.0, from 7.0.0 through 7.3.0. Users are recommended to upgrade to version 6.12.0 or 7.4.0, which fixes the issue.
CVE-2026-95616 High 2026-09-30 No exploit published No public exploit An integer overflow in WSS4J's DER bounds check lets an oversized allocation pass validation. An unauthenticated attacker can send a SOAP message carrying an X.509 certificate whose SubjectKeyIdentifier extension declares a length of 0x7FFFFFFF; WSS4J decodes this while resolving the signature's key reference, before the message is authenticated, so an eleven-byte extension triggers a 2 GB allocation. Repeated requests exhaust server memory. Users are recommended to upgrade to versions 4.0.2 or 3.0.6 or 2.4.4, which fix this issue.
CVE-2026-92899 Medium 2026-09-30 No exploit published No public exploit Apache WSS4J remembers the Nonce of each UsernameToken it accepts, so a captured token cannot be reused. It stored the Nonce as raw base64 text, but authentication decodes that text and uses the bytes.The same bytes can be written as base64 in several ways. An attacker who captured an authenticated request could re-send it with a space added to the Nonce: the password digest still verified, but the token no longer matched the remembered one, so the replay was accepted. Since a UsernameToken does not cover the message body, the captured token could then be reused on requests of the attacker's choosing until it expired. Affects deployments with a nonce replay cache configured, as Apache CXF has by default, and only tokens using a password digest. The cache is now keyed on the decoded Nonce. Users are recommended to upgrade to versions 4.0.2 or 3.0.6 or 2.4.4, which fix this issue.
CVE-2026-92121 High 2026-09-30 No exploit published No public exploit In the WSS4J streaming (StAX) code, a signature reference using the WS-Security STR-Transform leaves an internal "inside signed content" flag permanently set. The WS-SecurityPolicy enforcer uses that flag to decide whether an element needs checking, so it stops evaluating SignedParts and SignedElements for the rest of the message. A policy requiring the SOAP Body to be signed is then satisfied even when the Body carries no signature, removing the protection against XML Signature Wrapping. Signature verification itself is unaffected. The DOM code is not affected.  Users are recommended to upgrade to versions 4.0.2 or 3.0.6 or 2.4.4 which fix this issue.
CVE-2026-89238 Critical 2026-09-30 No exploit published No public exploit WSS4J EncryptedHeader child confusion could promote an attacker-controlled plaintext element as the decrypted header, leading to incorrect confidentiality coverage and possible policy bypass. Users are recommended to upgrade to versions 4.0.2 or 3.0.6 or 2.4.4, which fix this issue.
CVE-2026-88920 Critical 2026-09-30 No exploit published No public exploit An authentication bypass in the DOM security processor in Apache WSS4J allows unauthenticated remote attackers to forge authenticated SOAP messages via a crafted unsigned SAML sender-vouches assertion containing an attacker-controlled key. Users are recommended to upgrade to versions 4.0.2 or 3.0.6 or 2.4.4, which fix this issue.
CVE-2026-87830 Critical 2026-09-30 No exploit published No public exploit In the StAX streaming WS-SecurityPolicy validator, certain relative or unsupported XPath expressions can be converted into paths that never match the actual XML element path. A remote SOAP peer may therefore send a required element without the expected signature or encryption. Users are recommended to upgrade to versions 4.0.2 or 3.0.6 or 2.4.4, which fix this issue.
CVE-2026-85532 High 2026-09-30 No exploit published No public exploit Apache WSS4J accepted attacker-controlled derived-key lengths and offsets without adequate bounds. This could permit cryptographically weak keys or excessive CPU and memory consumption when processing crafted WS-Security messages. The fixes enforce a minimum key length of 16 bytes, a maximum length of 512 bytes, and a maximum offset of 4096 bytes. Users are recommended to upgrade to versions 4.0.2 or 3.0.6 or 2.4.4, which fix this issue.
CVE-2026-66083 Medium 2026-09-29 No exploit published No public exploit The /datasources/unauth-datasource endpoint does not properly enforce data source authorization. An authenticated user can invoke this endpoint to obtain information about data sources they are not authorized to access. This may expose data source configuration and other sensitive metadata, depending on the fields returned by the endpoint. This issue affects Apache DolphinScheduler: before 3.4.3. Users are recommended to upgrade to version 3.4.3, which fixes the issue.
CVE-2026-102497 High 2026-09-29 No exploit published No public exploit The Apache XmlSchema walker (xmlschema-walker) doesn't detect cycles in type derivation, substitution groups, model groups or attribute groups. A malicious schema with such a cycle can make the walker recurse until the stack overflows, causing a denial of service. Users are recommended to upgrade to version 2.3.3, which fixes this issue.
CVE-2026-102496 High 2026-09-29 No exploit published No public exploit Apache XmlSchema doesn't limit how deeply schema structures can be nested when it builds its schema model, so a malicious schema can make parsing recurse until the stack overflows. This causes a denial of service. Users are recommended to upgrade to version 2.3.3, which fixes this issue.
CVE-2026-102495 High 2026-09-29 No exploit published No public exploit Apache XmlSchema doesn't limit how deeply schema imports and includes can be nested, so a malicious schema can make parsing recurse until the stack overflows. This causes a denial of service. Users are recommended to upgrade to version 2.3.3, which fixes this issue.
CVE-2026-91006 High 2026-09-28 Protected by Waratek No public exploit Apache Karaf's instance-management service (InstanceServiceImpl) builds the command line used to launch a child Karaf JVM by string concatenation, then executes it through /bin/sh (Unix) or cscript (Windows). The caller-supplied javaOpts value is spliced into that string unquoted. A javaOpts value containing shell metacharacters (;, |, `, $(...)) is interpreted by the shell instead of being passed to the JVM as an option, giving arbitrary OS command execution as the Karaf process user. Reachable via the shell commands instance:create, instance:start, instance:restart, instance:change-opts, and the equivalent InstanceMBean JMX operations (createInstance, startInstance, changeJavaOpts, cloneInstance). Mitigation  * Set karaf.secured.command.compulsory.roles=admin in etc/system.properties to close the fail-open gap for all unconfigured command scopes. * Restrict which principals can reach instance:* commands and InstancesMBean via etc/users.properties role assignments. * Treat javaOpts passed to instance:create/instance:start/instance:change-opts/InstancesMBean as untrusted input only from fully-trusted operators.
CVE-2026-92609 Critical 2026-09-25 No exploit published No public exploit Session fixation in HTTP management authentication allows remote attackers to gain unauthorized access to an authenticated management session via reuse of a session identifier retained across successful authentication. This issue affects Apache Qpid Broker-J: through 10.1.0. Users are recommended to upgrade to version 10.1.1, which fixes the issue.
CVE-2026-92608 High 2026-09-25 No exploit published No public exploit Improper handling of property-encoding exceptions in AMQP 1.0-to-AMQP 0-10 message conversion allows authenticated message producers to disrupt delivery to AMQP 0-10 consumers via message properties that the target encoder does not handle correctly. This issue affects Apache Qpid Broker-J: through 10.1.0. Users are recommended to upgrade to version 10.1.1, which fixes the issue.
CVE-2026-92573 Medium 2026-09-25 No exploit published No public exploit Improper handling of compressed data in the shared GZIP decompressor used for AMQP 0-8/0-9/0-9-1 and AMQP 0-10 message delivery, message conversion and HTTP management JSON rendering allows authenticated message producers to exhaust memory and disrupt broker availability via processing without a decompressed-output limit. This issue affects Apache Qpid Broker-J: through 10.1.0. Users are recommended to upgrade to version 10.1.1, which fixes the issue.
CVE-2026-92564 High 2026-09-25 No exploit published No public exploit A pre-authentication attacker could leverage type nesting to cause a StackOverflowError potentially leading to denial of service. This issue affects Apache Qpid Broker-J: through 10.1.0. Users are recommended to upgrade to version 10.1.1, which fixes the issue.
CVE-2026-92560 High 2026-09-25 No exploit published No public exploit A pre-authentication attacker could leverage type size/count handling to cause excessive allocation leading to potential denial of service. This issue affects Apache Qpid Broker-J: through 10.1.0. Users are recommended to upgrade to version 10.1.1, which fixes the issue.
CVE-2026-92550 High 2026-09-25 No exploit published No public exploit A pre-authentication attacker could leverage type size/count handling to cause excessive allocation leading to potential denial of service. This issue affects Apache Qpid Broker-J: through 10.1.0. Users are recommended to upgrade to version 10.1.1, which fixes the issue.
CVE-2026-91867 Medium 2026-09-21 No exploit published No public exploit When Neethi fetches a remote policy reference, it only limits the time per read, not the whole transfer, so a server that trickles bytes slowly can keep the fetch alive indefinitely and tie up the calling thread (denial of service). Users are recommended to upgrade to version 3.2.4, which fixes this issue.
CVE-2026-91866 High 2026-09-21 No exploit published No public exploit A specially crafted pair of WS-Policy documents can force Neethi's policy-intersection to do exponential amounts of work, pinning the CPU for a long time (denial of service). Users are recommended to upgrade to version 3.2.4, which fixes this issue.
CVE-2026-91865 High 2026-09-21 No exploit published No public exploit A small WS-Policy document using repeated policy references can force Neethi to re-expand the same references exponentially during normalization, consuming huge amounts of CPU and memory (denial of service). Users are recommended to upgrade to version 3.2.4, which fixes this issue.
CVE-2026-91864 High 2026-09-21 No exploit published No public exploit A specially crafted WS-Policy document can pack unlimited content inside a policy assertion, which Neethi copies into memory without counting it against its size limits, exhausting the heap (denial of service). Users are recommended to upgrade to version 3.2.4, which fixes this issue.
CVE-2026-91863 High 2026-09-21 No exploit published No public exploit A specially crafted WS-Policy document with deeply nested policy elements can bypass Neethi's nesting-depth limit and exhaust the thread stack, crashing the parser (denial of service). Users are recommended to upgrade to version 3.2.4, which fixes this issue.
CVE-2026-87976 High 2026-09-16 Protected by Waratek No public exploit Apache NiFi Registry 0.4.0 through 2.11.0 are subject to path manipulation when storing extension bundle content using group, artifact, and version coordinates from uploaded NAR manifests. The default file persistence provider used coordinates as filesystem path components without rejected parent-directory names, and the path-containment check compared an unnormalized resolved path. An authenticated user authorized to write and delete bundles in a bucket can upload a NAR with a crafted manifest resulting in file system operations outside of the file persistence directory. Upgrading to Apache NiFi Registry 2.12.0 is the recommended mitigation, which rejects parent-directory coordinates and requires a normalized path to remain a strict child of the storage root location.
CVE-2026-86089 Low 2026-09-16 No exploit published No public exploit Apache NiFi 2.11.0 supports migrating the contents of a version-controlled Process Group into a Connector using REST API methods that list eligible migration sources and submit migration requests. The framework authorized both methods against the target Connector alone, without evaluating access to the Process Groups involved. The absence of Process Group authorization allowed an authenticated user with read access to a Connector to enumerate the identifiers, names, and flow registry details of version-controlled Process Groups outside the scope of granted read policies. It also allowed a user with write access to a Connector to migrate a Process Group without write access to that Process Group, copying the flow definition, referenced assets, and component state into the Connector, and leaving the source Process Group disabled and renamed. Migration excludes sensitive property values and requires the source Process Group to be stopped with empty queues, which limits the scope of exposure. Apache NiFi installations that do not implement component-level authorization policies for Process Groups are not subject to this vulnerability, because the framework enforces Connector write permissions as the security boundary. Upgrading to Apache NiFi 2.12.0 is the recommended mitigation, which filters migration sources to Process Groups the requesting user is authorized to read, and requires write access to the source Process Group when submitting a migration request.
CVE-2026-84501 Medium 2026-09-16 No exploit published No public exploit An unauthenticated attacker can inject arbitrary fake log lines into Apache ZooKeeper's operational log by sending a crafted add_auth("ensemble", ...) request containing newline characters (\n). When the ensemble name doesn't match, EnsembleAuthenticationProvider.handleAuthentication() logs the raw, unsanitized name via LOG.warn(). Because SLF4J's {} placeholder preserves embedded newlines, the attacker can forge complete log entries — with arbitrary timestamps, log levels, class names, and messages — that are visually indistinguishable from genuine ZooKeeper log output. This issue affects Apache ZooKeeper: from 3.9.0 through 3.9.5, from 3.8.0 through 3.8.6. Users are recommended to upgrade to version 3.8.7 or 3.9.6, which fixes the issue.
CVE-2026-84439 Medium 2026-09-16 No exploit published No public exploit When audit logging is enabled (zookeeper.audit.enable=true), an unauthenticated attacker can inject arbitrary fields into Apache ZooKeeper's audit log by sending a digest authentication request with tab characters (\t) embedded in the username. Because the audit log uses tab-separated key=value format, the injected tabs are parsed as legitimate field separators, allowing the attacker to spoof audit results (e.g., injecting result=success), forge operation types, and corrupt forensic evidence. A log injection vulnerability in Apache ZooKeeper allows a client that can call setACL to inject forged key-value fields into zookeeper_audit.log. When audit logging is enabled, the server serializes attacker-controlled digest ACL ids into the acl= audit field without escaping tab characters. Because audit events are emitted as tab-separated key=value records, a crafted ACL id can make one successful setAcl event appear to contain forged fields such as operation=delete and znode=/forged. This undermines the integrity of downstream audit parsing, alerting, and incident response. This issue affects Apache ZooKeeper: from 3.9.0 through 3.9.5, from 3.8.0 through 3.8.6. Users are recommended to upgrade to version 3.9.6 or 3.8.7, which fixes the issue.
CVE-2026-82561 Medium 2026-09-16 No exploit published No public exploit Apache NiFi 1.5.0 through 2.11.0 provide REST API methods that replace the entire contents of a Process Group using a client-supplied flow definition, covering Process Group flow replacement together with versioned flow update and rebase operations. Framework authorization for these methods was limited to read and write privileges on the Process Group itself, unlike the corresponding asynchronous update request methods, which also authorize the components encapsulated in the Process Group along with referenced Controller Services, Parameter Contexts, and Parameter Providers. As a result of the missing authorization, an authenticated user with write access to a Process Group could supply a flow definition that modifies or removes components in descendant Process Groups protected by more restrictive access policies, and could bind components to Controller Services and Parameter Contexts without authorization for those referenced components. Existing verification checks limited the impact to stopped components, and the issue applies only to deployments that use component-level authorization policies, because the framework enforces write permissions as the security boundary. Upgrading to Apache NiFi 2.12.0 is the recommended mitigation, which applies consistent reference resolution and component authorization across Process Group replacement and versioned flow update methods
CVE-2026-81866 Low 2026-09-16 No exploit published No public exploit Apache NiFi 2.9.0 through 2.11.0 provide Connector configuration update and verification REST API methods that do not enforce authorization checking on Assets and Secrets referenced in proposed configuration. Updating or verifying a Connector configuration step can apply Asset and Secret references, but framework authorization was limited to write privileges on the Connector itself. As a result of the missing authorization, an authenticated user authorized to modify a Connector, but not authorized to read a referenced Parameter Provider, could apply Secret values backed by that Parameter Provider. The same methods also accepted Asset identifiers without verifying that the Asset belonged to the Connector being configured. Apache NiFi installations that do not implement different levels of authorization across Connectors and Parameter Providers are not subject to this vulnerability, because the framework enforces write permissions on the Connector as the security boundary. Upgrading to Apache NiFi 2.12.0 is the recommended mitigation, which authorizes read access to referenced Parameter Providers and verifies Connector ownership of referenced Assets during configuration update and verification.
CVE-2026-79993 High 2026-09-16 No exploit published No public exploit The `deleteContainer` opcode (0x14/20) is processed without verifying the caller's ACL permissions, allowing any authenticated client to delete specific znodes in the data tree regardless of the ACL restrictions on the znode or its parent. This opcode is considered internal-only and the official client doesn't have API for it, but a client that can open a plain TCP session on the ZooKeeper client port (2181 by default) - with NO authentication and NO ACL permissions - can delete any empty persistent znode (including regular persistent nodes, container nodes, and TTL nodes) by issuing the raw protocol OpCode deleteContainer (20). The deleteContainer request path completely skips both the session check and the DELETE ACL check that are enforced by the regular delete (OpCode 2) path. This is an authorization bypass / ACL enforcement bug. This issue affects Apache ZooKeeper: from 3.9.0 through 3.9.5, from 3.8.0 through 3.8.6. Users are recommended to upgrade to version 3.9.6 or 3.8.7, which fixes the issue.
CVE-2026-70469 High 2026-09-16 No exploit published No public exploit Apache NiFi 2.11.0 disabled support for gzip-encoded HTTP requests for the application REST API and rejected requests that included the standard Content-Encoding header indicating gzip encoding. The framework enforcement filter did not check multiple instances of the Content-Encoding header and did not reject non-standard identifiers for gzip encoding, allowing a malicious client to send crafted requests that could consume excessive amounts of memory. Upgrading to Apache NiFi 2.12.0 is the recommended mitigation, which disables decompression of gzip-encoded HTTP requests regardless of header number or encoding identifiers.
CVE-2026-59969 High 2026-09-16 No exploit published No public exploit Apache ZooKeeper quorum TLS fails to enforce peer hostname verification in FIPS-mode deployments. When sslQuorum=true, zookeeper.fips-mode=true, ssl.quorum.hostnameVerification=true, and ssl.quorum.clientHostnameVerification=true are enabled, the Java SSLSocket quorum path accepts a CA-trusted peer certificate whose SAN does not match the connected host. A malicious or misissued peer certificate can therefore join quorum traffic, participate in leader election, and enter replication flows. Users are recommended to upgrade to version 3.8.7 or 3.9.6, which fixes the issue.
CVE-2026-59739 High 2026-09-16 No exploit published No public exploit Information disclosure via SetWatches reconnect replay in Apache ZooKeeper due to missing ACL check. An attacker can discover ACL-restricted paths by registering exists-watches on non-existent paths, then reconnecting after the paths are created with restricted ACLs. Issue is caused by incomplete fix for CVE-2024-23944 (ZOOKEEPER-4799). The fix added ACL checking to WatchManager.triggerWatch(). However, DataTree.setWatches() — the SetWatches/SetWatches2 reconnect replay handler — still calls watcher.process(event) with null ACL, bypassing the check entirely. It's important to note that only the path is exposed by this vulnerability, not the data of znode, but since znode path can contain sensitive information like user name or login ID, this issue is potentially critical. Users are recommended to upgrade to version 3.9.6, 3.8.7 which fixes the issue.
CVE-2026-82617 Critical 2026-09-11 No exploit published No public exploit The two built-in name-finder patterns exposed by opennlp.tools.namefind.RegexNameFinderFactory - DEFAULT_REGEX_NAME_FINDER.EMAIL and DEFAULT_REGEX_NAME_FINDER.URL - contain ambiguous nested quantifiers. An application that obtains these finders through RegexNameFinderFactory.getDefaultRegexNameFinders(...) and then applies them to untrusted text through RegexNameFinder.find(String[]) or RegexNameFinder.find(String) can be driven into super-linear backtracking or into unbounded matcher recursion by a small crafted input. For the EMAIL pattern, a long run of local-part characters that is never followed by an @ forces the matcher to re-scan to end-of-input from every starting offset. Cost grows quadratically with input length: an input of approximately 32 KB consumes several seconds of CPU in a single find() call and returns no match, and each doubling of the input multiplies the cost roughly four-fold. For the URL pattern, the query-string sub-expression nests a capturing repetition inside an outer repetition. The JDK matcher recurses once per query token, so an input of approximately 4 KB containing many &-separated tokens exhausts the thread stack and causes java.lang.StackOverflowError to propagate out of find(), terminating the calling thread. On a thread created with a smaller stack (for example -Xss512k, typical of server worker pools) approximately 1 KB is sufficient. In both cases an attacker who can supply text for analysis can convert a single request into seconds to minutes of pinned CPU, or into an abrupt thread death, denying service to the embedding application. No authentication, special configuration, or model file is required beyond the application having selected one of the two built-in finders. This issue affects Apache OpenNLP: from 2.0.0 through 2.5.11; from 3.0.0-M1 through 3.0.0-M5. Users are recommended to upgrade to version 2.5.12, or to 3.0.0-M6 for users tracking the 3.0.0 milestone line, which fix the issue.
CVE-2026-67211 High 2026-09-11 Protected by Waratek No public exploit OOM Denial of Service via Unbounded Map Pre-Sizing in Apache OpenNLP SymSpellModelSerializer Versions Affected: - 3.0.0-M4 - 3.0.0-M5 (The opennlp-spellcheck extension was introduced in 3.0.0-M4. Releases 1.x and 2.x do not contain the affected code.) Description: The SymSpellModelSerializer.create() method reads two 32-bit signed integer count fields (unigramCount and bigramCount) from a binary SymSpell model stream and passes each value directly to LinkedHashMap.newLinkedHashMap() after validating only that it is non-negative. No upper bound is applied, so the count is fully attacker-controlled when the model file originates from an untrusted source. A crafted .bin model file in which either count field is set to Integer.MAX_VALUE (or any value large enough to exhaust the available heap) causes the map to be pre-sized to a capacity of 2^30 entries. The oversized backing array is allocated on the first put() into that map, requesting 4–8 GB depending on whether compressed oops are in effect, and the load fails with an OutOfMemoryError. Because the count fields sit immediately after a fixed-size header (magic, format version, three UTF strings, the configuration fields, and the edit-distance identifier) the attacker pays no meaningful size cost to weaponize a payload: a file of well under 100 bytes plus a single real entry is sufficient to crash a JVM that loads it. Any code path that deserializes a SymSpell model is affected, including SymSpellModels.deserialize(InputStream), SymSpellModels.fromBytes(byte[]), classpath model loading via SymSpellModelResolver.resolveByLanguage(String), the CorrectTextTool command-line tool, and model-archive loading through the registered ArtifactSerializer. The opennlp-spellcheck extension ships in the official OpenNLP binary distribution. The practical impact is denial of service against processes that load SymSpell model files from untrusted or semi-trusted origins. Mitigation: - 3.x users should upgrade to 3.0.0-M6. Note: The fix applies an upper bound to both count fields, checked before the map is pre-sized; counts that are negative or exceed the bound cause an IOException to be thrown and the read to fail fast with no large allocation. The bound is the existing AbstractModelReader.MAX_ENTRIES limit introduced earlie, which the current change promotes to public visibility so that serializers implementing their own binary format can share it. The default bound is 10,000,000, which is well above the entry counts of legitimate SymSpell dictionaries but far below any value that would threaten heap exhaustion. Deployments that legitimately need to load larger dictionaries can raise the limit at JVM startup by setting the OPENNLP_MAX_ENTRIES system property to the desired positive integer (e.g. -DOPENNLP_MAX_ENTRIES=50000000); invalid or non-positive values fall back to the default. Note that this property is shared with the model-reader limit and raising it relaxes both. Users who cannot upgrade immediately should treat all SymSpell .bin model files as untrusted input unless their provenance is verified, and should avoid loading models supplied by end users or fetched from third-party repositories without integrity checks.
CVE-2026-84939 Critical 2026-09-10 No exploit published No public exploit Path traversal vulnerability in Apache FreeMarker template loading mechanism, if the attacker can specify an arbitrary malformed locale identifier to FreeMarker, and the localized lookup configuration setting is enabled (it's by default enabled). This issue affects Apache FreeMarker from 2.2.0 through 2.3.34. Users are recommended to upgrade to version 2.3.35. Disabling localized lookup in previous versions also mitigates this. Note that even in versions affected by this vulnerability, the files that can be loaded remain restricted by the TemplateLoader that FreeMarker is configured to use. In particular, FileTemplateLoader prevents attempts to traverse outside the baseDir specified in its constructor. Other TemplateLoader implementations may allow access outside their designated base directory, but they are still constrained by the underlying storage mechanism—for example, a loader wrapping a Java class loader can only access resources that the class loader can load, while one wrapping a web application context can only access resources available through that context.
CVE-2026-80354 High 2026-09-10 No exploit published No public exploit Authorization bypass through User-Controlled key vulnerability in Apache Camel K. An authorization vulnerability in custom resource resolution allows a tenant to reference secrets by name in the operator namespace, potentially exposing secrets belonging to other tenants or operator components. This issue affects Apache Camel K: from 2.0.0 before 2.9.3, from 2.10.1 before 2.10.2. Users are recommended to upgrade to version 2.9.3, 2.10.2 or 2.11.0, which fixes the issue.
CVE-2026-80352 Critical 2026-09-10 No exploit published No public exploit Improper Control of Generation of Code ('Code Injection') vulnerability in Apache Camel K. A YAML injection vulnerability in custom resource configuration allows an authorized CR author to inject arbitrary Kubernetes objects, potentially enabling unauthorized resource creation with the privileges of the operator. This issue affects Apache Camel K: from 2.0.0 before 2.9.3, from 2.10.1 before 2.10.2. Users are recommended to upgrade to version 2.9.3, 2.10.2 or 2.11.0, which fixes the issue.
CVE-2026-80351 Critical 2026-09-10 No exploit published No public exploit Improper neutralization of directives in dynamically evaluated code ('eval injection') vulnerability in Apache Camel K. An improper neutralization of directives in dynamically evaluated Maven configuration allows tenant-controlled repository content to influence code execution within the operator pod, potentially enabling tenants to execute arbitrary code with the privileges of the operator. This issue affects Apache Camel K: from 2.0.0 before 2.9.3, from 2.10.1 before 2.10.2. Users are recommended to upgrade to version 2.9.3, 2.10.2 or 2.11.0, which fixes the issue.
CVE-2026-75880 Medium 2026-09-10 No exploit published No public exploit An authenticated client could attach a consumer with a selector containing crafted wildcard usage that results in excessive evaluation during message delivery attempts, occupying a shared broker thread and leading to denial of service. This issue affects Apache Artemis: from 2.50.0 through 2.56.0; Apache ActiveMQ Artemis: from 1.0.0 through 2.44.0. Users are recommended to upgrade to version 2.57.0, which fixes this issue.
CVE-2026-67593 Critical 2026-09-10 No exploit published No public exploit A remote attacker can craft an Openwire RemoveSubscriptionInfo command to cause the deletion of a queue on the Artemis broker before the connection authentication and authorization stage or at any time thereafter. This issue affects Apache Artemis: from 2.50.0 through 2.56.0; Apache ActiveMQ Artemis: from 1.0.0 through 2.44.0. Users are recommended to upgrade to version 2.57.0, which fixes the issue.
CVE-2026-57967 Critical 2026-09-10 No exploit published No public exploit An unauthenticated remote attacker can craft a CORE protocol SESSION_REATTACH packet to steal an existing session and assume ongoing execution of the previously authenticated session. This issue affects Apache Artemis: from 2.50.0 through 2.56.0; Apache ActiveMQ Artemis: from 1.0.0 through 2.44.0. Users are recommended to upgrade to version 2.57.0, which fixes the issue.
CVE-2026-57822 Medium 2026-09-10 Protected by Waratek No public exploit When the broker is processing message-based management requests, sent by an authenticated messaging client that is authorized with MANAGE permission to perform management-via-messaging, the parameter processing can trigger Java deserialization of certain method parameters that the broker will not utilise. The permitted types allow to craft a payload causing excessive computation and pinning the processing thread, leading to denial of service. This issue affects Apache Artemis: from 2.50.0 through 2.56.0; Apache ActiveMQ Artemis: from 1.3.0 through 2.44.0. Users are recommended to upgrade to version 2.57.0, which fixes the issue.
CVE-2026-49364 Critical 2026-09-10 No exploit published No public exploit An unauthenticated network-adjacent attacker can leverage discovery to capture cluster administrative credentials during the initial cluster connection handshake. This issue affects Apache Artemis: from 2.50.0 through 2.56.0; Apache ActiveMQ Artemis: from 1.0.0 through 2.44.0. Users are recommended to upgrade to version 2.57.0, which fixes the issue.
CVE-2026-49363 High 2026-09-10 No exploit published No public exploit An unauthenticated remote attacker connecting with the CORE protocol can discover cluster node details by sending a SUBSCRIBE_TOPOLOGY request prior to authentication. This issue affects Apache Artemis: from 2.50.0 through 2.56.0; Apache ActiveMQ Artemis: from 1.0.0 through 2.44.0. Users are recommended to upgrade to version 2.57.0, which fixes the issue.
CVE-2026-49362 High 2026-09-10 No exploit published No public exploit An unauthenticated remote attacker can create arbitrary durable queues via the CORE protocol, leading to unauthorized broker state manipulation and potential denial of service. This issue affects Apache Artemis: from 2.50.0 through 2.56.0; Apache ActiveMQ Artemis: from 1.0.0 through 2.44.0. Users are recommended to upgrade to version 2.57.0, which fixes the issue.
CVE-2026-74761 High 2026-09-09 No exploit published No public exploit Improper input validation in TopicRegion in Apache ActiveMQ, Apache ActiveMQ Broker, and Apache ActiveMQ All on all platforms. An authenticated client can spoof clientId when removing a durable topic subscription. This issue affects Apache ActiveMQ Broker: before 5.19.11, from 6.0.0 before 6.3.2; Apache ActiveMQ All: before 5.19.11, from 6.0.0 before 6.3.2; Apache ActiveMQ: before 5.19.11, from 6.0.0 before 6.3.2. Users are recommended to upgrade to version 6.3.2 or 5.19.11 which fixes the issue.
CVE-2026-73334 High 2026-09-09 No exploit published No public exploit Potential problem for users of the org.apache.parquet.crypto.keytools package in Apache Parquet, versions 1.12 to 1.18. This package enables users to encrypt Parquet files via an envelope encryption mechanism that wraps (encrypts) data keys via a Key Management Service (KMS).  On the reader side, the KMS URL can be application-controlled or file-controlled. If the user does not leverage application control for this parameter, a file-controlled KMS URL is forwarded to a pluggable KmsClient implementation. If the pluggable implementation does not perform host validation, a KMS token can be sent to a malicious host set by an attacker in the file. Before the problem is fixed, users are recommended to leverage application control for KMS URL parameter in readers (versions 1.12-1.18). After the problem is fixed (presumably in version 1.19), the upgrade will disable file-controlled KMS URL by default. Users of the KMS URL parameter  will have two options then: leverage application control for KMS URL parameter in readers, or enable file-controlled KMS URL (via a new app parameter). The latter option will explicitly require (in the new parameter documentation) to validate the KMS URL and use authentication in the custom implementation of the KMS client plug in.
CVE-2026-78254 High 2026-09-07 No exploit published No public exploit The ftp and scp tasks of Apache Ant can download files from a remote server. A malicious server can provide relative paths that allow it to write outside of the dedicated target directory for the download, making it possible to overwrite files of the attacker's choice using the permissions of the user running Ant in versions prior to Ant 1.10.18. In order to exploit this vulnerability, the server would either have to be malicious or be subject to a machine-in-the-middle attack. Additionally in the case of scp or the ftp task using ftps the server must pass the server identity checks performed by the tasks. For ftp tasks not using ftps a malicious server could act as a machine-in-the-middle to provide malicious files. Starting with Ant 1.10.18 both tasks will prevent writing outside of the destination directory by default. An option is available to disable this behavior in the unlikely case that the old behavior is required by existing build files. Mitigations: Users of scp and ftp (when using ftps) in any version of Ant should not bypass server identity checks. Users of ftp not using ftps should switch to ftps where possible. All users are recommended to upgrade to Apache Ant 1.10.18, which fixes this issue.
CVE-2026-32773 Medium 2026-09-02 No exploit published No public exploit There is a lack of XSS escaping in the Spark History Server prior to 3.5.8 which allows a malicious Spark job to generate arbitrary unescaped frontend code which could lead to a minimal privilege escalation in browser. Users are encouraged to upgrade to Spark 3.5.8 or later. This CVE is marked as "low" since the path to exploit requires both relatively high permissions (ability to launch a Spark job) and requires tricking a user with higher permissions to log in and visit the Spark history web page. Users are encouraged to upgrade their Spark history servers to Spark 3.5.8 or later.
CVE-2026-76986 Medium 2026-08-31 No exploit published No public exploit Improper neutralization of input during web page generation in Apache Wicket. org.apache.wicket.markup.html.form.AbstractSingleSelectChoice, the base class of DropDownChoice, writes the body of the default option — the entry shown when no choice is selected — into the markup as it is, while every other option body in the same select is escaped according to the escape-model-strings setting. The body comes from getNullValidDisplayValue() or getNullKeyDisplayValue(), both of which are protected, so what they return is not necessarily the plain text the default implementation reads from a resource bundle. An application is affected where it overrides one of those methods and returns a value holding data an attacker can influence, or where its own nullValid or null bundle entry holds such a value. The bundles shipped with Wicket contain plain text. RadioChoice overrides getDefaultChoice to emit no default option and is not affected. As a workaround, escape the value in the override. This issue affects Apache Wicket: from 8.0.0 through 8.18.0, from 9.0.0 through 9.23.0, from 10.0.0 through 10.10.0. Older, unsupported releases from 1.5.0 onwards are also affected. Users are recommended to upgrade to version 8.19.0, 9.24.0 or 10.11.0, which fix the issue.
CVE-2026-76985 Medium 2026-08-31 No exploit published No public exploit Improper neutralization of input during web page generation in Apache Wicket. org.apache.wicket.extensions.markup.html.form.palette.component.AbstractOptions, which renders the two option lists of a Palette, escapes the id and the display value of each option according to the escape-model-strings setting, and wrote the attribute names and values returned by getAdditionalAttributes into the <option> tag as they came. An application is affected where it overrides Palette.getAdditionalAttributesForChoices, Palette.getAdditionalAttributesForSelection or AbstractOptions.getAdditionalAttributes and returns a value holding data an attacker can influence. These methods return null by default, so an application that does not override them is not affected. As a workaround, escape the values in the override. This issue affects Apache Wicket: from 8.0.0 through 8.18.0, from 9.0.0 through 9.23.0, from 10.0.0 through 10.10.0. Older, unsupported releases from 1.4.0 onwards are also affected. Users are recommended to upgrade to version 8.19.0, 9.24.0 or 10.11.0, which fix the issue.
‹ prev page 1 of 19 next ›