|
CVE-2024-56512
|
Low
|
2024-12-28
|
Mitigation candidate
|
Working exploit published
|
Apache NiFi 1.10.0 through 2.0.0 are missing fine-grained authorization checking for Parameter Contexts, referenced Controller Services, and referenced Parameter Providers, when creating new Process Groups.
Creating a new Process Group can include binding to a Parameter Context, but in cases where the Process Group did not reference any Parameter values, the framework did not check user authorization for the bound Parameter Context. Missing authorization for a bound Parameter Context enabled clients to download non-sensitive Parameter values after creating the Process Group.
Creating a new Process Group can also include referencing existing Controller Services or Parameter Providers. The framework did not check user authorization for referenced Controller Services or Parameter Providers, enabling clients to create Process Groups and use these components that were otherwise unauthorized.
This vulnerability is limited in scope to authenticated users authorized to create Process Groups. The scope is further limited to deployments with component-based authorization policies. Upgrading to Apache NiFi 2.1.0 is the recommended mitigation, which includes authorization checking for Parameter and Controller Service references on Process Group creation.
|
|
CVE-2024-52046
|
Critical
|
2024-12-25
|
Protected by RASP
|
No public exploit
|
The ObjectSerializationDecoder in Apache MINA uses Java’s native deserialization protocol to process
incoming serialized data but lacks the necessary security checks and defenses. This vulnerability allows
attackers to exploit the deserialization process by sending specially crafted malicious serialized data,
potentially leading to remote code execution (RCE) attacks.
This issue affects MINA core versions 2.0.X, 2.1.X and 2.2.X, and will be fixed by the releases 2.0.27, 2.1.10 and 2.2.4.
It's also important to note that an application using MINA core library will only be affected if the IoBuffer#getObject() method is called, and this specific method is potentially called when adding a ProtocolCodecFilter instance using the ObjectSerializationCodecFactory class in the filter chain. If your application is specifically using those classes, you have to upgrade to the latest version of MINA core library.
Upgrading will not be enough: you also need to explicitly allow the classes the decoder will accept in the ObjectSerializationDecoder instance, using one of the three new methods:
/**
* Accept class names where the supplied ClassNameMatcher matches for
* deserialization, unless they are otherwise rejected.
*
* @param classNameMatcher the matcher to use
*/
public void accept(ClassNameMatcher classNameMatcher)
/**
* Accept class names that match the supplied pattern for
* deserialization, unless they are otherwise rejected.
*
* @param pattern standard Java regexp
*/
public void accept(Pattern pattern)
/**
* Accept the wildcard specified classes for deserialization,
* unless they are otherwise rejected.
*
* @param patterns Wildcard file name patterns as defined by
* {@link org.apache.commons.io.FilenameUtils#wildcardMatch(String, String) FilenameUtils.wildcardMatch}
*/
public void accept(String... patterns)
By default, the decoder will reject *all* classes that will be present in the incoming data.
Note: The FtpServer, SSHd and Vysper sub-project are not affected by this issue.
|
|
CVE-2024-43441
|
Critical
|
2024-12-24
|
Mitigation candidate
|
Working exploit published
|
Authentication Bypass by Assumed-Immutable Data vulnerability in Apache HugeGraph-Server.
This issue affects Apache HugeGraph-Server: from 1.0.0 before 1.5.0.
Users are recommended to upgrade to version 1.5.0, which fixes the issue.
|
|
CVE-2024-12744
|
High
|
2024-12-24
|
Protected by RASP
|
No public exploit
|
A SQL injection in the Amazon Redshift JDBC Driver in v2.1.0.31 allows a user to gain escalated privileges via the getSchemas, getTables, or getColumns Metadata APIs. Users should upgrade to the driver version 2.1.0.32 or revert to driver version 2.1.0.30.
|
|
CVE-2019-2483
|
High
|
2024-12-24
|
No fix identified
|
No public exploit
|
Vulnerability in the Oracle iStore product of Oracle E-Business Suite (component: Shopping Cart). Supported versions that are affected are 12.1.1, 12.1.2, 12.1.3, 12.2.3, 12.2.4, 12.2.5, 12.2.6, 12.2.7 and 12.2.8. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle iStore. Successful attacks require human interaction from a person other than the attacker and while the vulnerability is in Oracle iStore, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle iStore accessible data as well as unauthorized update, insert or delete access to some of Oracle iStore accessible data. CVSS 3.0 Base Score 8.2 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:R/S:C/C:H/I:L/A:N).
|
|
CVE-2024-23945
|
Medium
|
2024-12-23
|
No exploit published
|
No public exploit
|
Signing cookies is an application security feature that adds a digital signature to cookie data to verify its authenticity and integrity. The signature helps prevent malicious actors from modifying the cookie value, which can lead to security vulnerabilities and exploitation. Apache Hive’s service component accidentally exposes the signed cookie to the end user when there is a mismatch in signature between the current and expected cookie. Exposing the correct cookie signature can lead to further exploitation.
The vulnerable CookieSigner logic was introduced in Apache Hive by HIVE-9710 (1.2.0) and in Apache Spark by SPARK-14987 (2.0.0). The affected components are the following:
* org.apache.hive:hive-service
* org.apache.spark:spark-hive-thriftserver_2.11
* org.apache.spark:spark-hive-thriftserver_2.12
|
|
CVE-2024-56337
|
Critical
|
2024-12-20
|
No exploit published
|
No public exploit
|
Time-of-check Time-of-use (TOCTOU) Race Condition vulnerability in Apache Tomcat.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.1, from 10.1.0-M1 through 10.1.33, from 9.0.0.M1 through 9.0.97.
The following versions were EOL at the time the CVE was created but are
known to be affected: 8.5.0 though 8.5.100. Other, older, EOL versions
may also be affected.
The mitigation for CVE-2024-50379 was incomplete.
Users running Tomcat on a case insensitive file system with the default servlet write enabled (readonly initialisation
parameter set to the non-default value of false) may need additional configuration to fully mitigate CVE-2024-50379 depending on which version of Java they are using with Tomcat:
- running on Java 8 or Java 11: the system property sun.io.useCanonCaches must be explicitly set to false (it defaults to true)
- running on Java 17: the system property sun.io.useCanonCaches, if set, must be set to false (it defaults to false)
- running on Java 21 onwards: no further configuration is required (the system property and the problematic cache have been removed)
Tomcat 11.0.3, 10.1.35 and 9.0.99 onwards will include checks that sun.io.useCanonCaches is set appropriately before allowing the default servlet to be write enabled on a case insensitive file system. Tomcat will also set sun.io.useCanonCaches to false by default where it can.
|
|
CVE-2024-38819
|
High
|
2024-12-19
|
Protected by RASP
|
Working exploit published
|
Applications serving static resources through the functional web frameworks WebMvc.fn or WebFlux.fn are vulnerable to path traversal attacks. An attacker can craft malicious HTTP requests and obtain any file on the file system that is also accessible to the process in which the Spring application is running.
|
|
CVE-2024-12801
|
Low
|
2024-12-19
|
No exploit published
|
No public exploit
|
Server-Side Request Forgery (SSRF) in SaxEventRecorder by QOS.CH logback version 0.1 to 1.3.14 and 1.4.0 to 1.5.12 on the Java platform, allows an attacker to
forge requests by compromising logback configuration files in XML.
The attacks involves the modification of DOCTYPE declaration in XML configuration files.
|
|
CVE-2024-12798
|
Medium
|
2024-12-19
|
No exploit published
|
No public exploit
|
ACE vulnerability in JaninoEventEvaluator by QOS.CH logback-core
upto including version 0.1 to 1.3.14 and 1.4.0 to 1.5.12 in Java applications allows
attacker to execute arbitrary code by compromising an existing
logback configuration file or by injecting an environment variable
before program execution.
Malicious logback configuration files can allow the attacker to execute
arbitrary code using the JaninoEventEvaluator extension.
A successful attack requires the user to have write access to a
configuration file. Alternatively, the attacker could inject a malicious
environment variable pointing to a malicious configuration file. In both
cases, the attack requires existing privilege.
|
|
CVE-2024-56128
|
Medium
|
2024-12-18
|
No exploit published
|
No public exploit
|
Incorrect Implementation of Authentication Algorithm in Apache Kafka's SCRAM implementation.
Issue Summary:
Apache Kafka's implementation of the Salted Challenge Response Authentication Mechanism (SCRAM) did not fully adhere to the requirements of RFC 5802 [1].
Specifically, as per RFC 5802, the server must verify that the nonce sent by the client in the second message matches the nonce sent by the server in its first message.
However, Kafka's SCRAM implementation did not perform this validation.
Impact:
This vulnerability is exploitable only when an attacker has plaintext access to the SCRAM authentication exchange. However, the usage of SCRAM over plaintext is strongly
discouraged as it is considered an insecure practice [2]. Apache Kafka recommends deploying SCRAM exclusively with TLS encryption to protect SCRAM exchanges from interception [3].
Deployments using SCRAM with TLS are not affected by this issue.
How to Detect If You Are Impacted:
If your deployment uses SCRAM authentication over plaintext communication channels (without TLS encryption), you are likely impacted.
To check if TLS is enabled, review your server.properties configuration file for listeners property. If you have SASL_PLAINTEXT in the listeners, then you are likely impacted.
Fix Details:
The issue has been addressed by introducing nonce verification in the final message of the SCRAM authentication exchange to ensure compliance with RFC 5802.
Affected Versions:
Apache Kafka versions 0.10.2.0 through 3.9.0, excluding the fixed versions below.
Fixed Versions:
3.9.0
3.8.1
3.7.2
Users are advised to upgrade to 3.7.2 or later to mitigate this issue.
Recommendations for Mitigation:
Users unable to upgrade to the fixed versions can mitigate the issue by:
- Using TLS with SCRAM Authentication:
Always deploy SCRAM over TLS to encrypt authentication exchanges and protect against interception.
- Considering Alternative Authentication Mechanisms:
Evaluate alternative authentication mechanisms, such as PLAIN, Kerberos or OAuth with TLS, which provide additional layers of security.
|
|
CVE-2024-54677
|
Medium
|
2024-12-17
|
No exploit published
|
No public exploit
|
Uncontrolled Resource Consumption vulnerability in the examples web application provided with Apache Tomcat leads to denial of service.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.1, from 10.1.0-M1 through 10.1.33, from 9.0.0.M1 through 9.9.97.
The following versions were EOL at the time the CVE was created but are
known to be affected: 8.5.0 though 8.5.100. Other, older, EOL versions
may also be affected.
Users are recommended to upgrade to version 11.0.2, 10.1.34 or 9.0.98, which fixes the issue.
|
|
CVE-2024-50379
|
Critical
|
2024-12-17
|
No exploit published
|
Proof of concept only
|
Time-of-check Time-of-use (TOCTOU) Race Condition vulnerability during JSP compilation in Apache Tomcat permits an RCE on case insensitive file systems when the default servlet is enabled for write (non-default configuration).
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.1, from 10.1.0-M1 through 10.1.33, from 9.0.0.M1 through 9.0.97.
The following versions were EOL at the time the CVE was created but are
known to be affected: 8.5.0 though 8.5.100. Other, older, EOL versions may also be affected.
Users are recommended to upgrade to version 11.0.2, 10.1.34 or 9.0.98, which fixes the issue.
|
|
CVE-2024-49194
|
High
|
2024-12-17
|
No exploit published
|
No public exploit
|
Databricks JDBC Driver 2.x before 2.6.40 could potentially allow remote code execution (RCE) by triggering a JNDI injection via a JDBC URL parameter. The vulnerability is rooted in the improper handling of the krbJAASFile parameter. An attacker could potentially exploit this vulnerability to achieve Remote Code Execution in the context of the driver by tricking a victim into using a crafted connection URL that uses the property krbJAASFile.
|
|
CVE-2024-12539
|
Medium
|
2024-12-17
|
No exploit published
|
No public exploit
|
An issue was discovered where improper authorization controls affected certain queries that could allow a malicious actor to circumvent Document Level Security in Elasticsearch and get access to documents that their roles would normally not allow.
|
|
CVE-2024-11993
|
Medium
|
2024-12-17
|
No exploit published
|
No public exploit
|
Reflected cross-site scripting (XSS) vulnerability in Liferay Portal 7.4.0 through 7.4.3.38, and Liferay DXP 7.4 GA through update 38 allows remote attackers to execute arbitrary web script or HTML via Dispatch name field
|
|
CVE-2024-10973
|
Medium
|
2024-12-17
|
No exploit published
|
No public exploit
|
A vulnerability was found in Keycloak. The environment option `KC_CACHE_EMBEDDED_MTLS_ENABLED` does not work and the JGroups replication configuration is always used in plain text which can allow an attacker that has access to adjacent networks related to JGroups to read sensitive information.
|
|
CVE-2023-37940
|
Medium
|
2024-12-17
|
No exploit published
|
No public exploit
|
Cross-site scripting (XSS) vulnerability in the edit Service Access Policy page in Liferay Portal 7.0.0 through 7.4.3.87, and Liferay DXP 7.4 GA through update 87, 7.3 GA through update 29, and older unsupported versions allows remote attackers to inject arbitrary web script or HTML via a crafted payload injected into a service access policy's `Service Class` text field.
|
|
CVE-2024-35230
|
Medium
|
2024-12-16
|
No exploit published
|
Proof of concept only
|
GeoServer is an open source software server written in Java that allows users to share and edit geospatial data. In affected versions the welcome and about page includes version and revision information about the software in use (including library and components used). This information is sensitive from a security point of view because it allows software used by the server to be easily identified. This issue has been patched in version 2.26.0 and all users are advised to upgrade. There are no known workarounds for this vulnerability.
|
|
CVE-2024-55887
|
High
|
2024-12-13
|
Protected by RASP
|
No public exploit
|
Ucum-java is a FHIR Java library providing UCUM Services. In versions prior to 1.0.9, XML parsing performed by the UcumEssenceService is vulnerable to XML external entity injections. A processed XML file with a malicious DTD tag could produce XML containing data from the host system. This impacts use cases where ucum is being used to within a host where external clients can submit XML. Release 1.0.9 of Ucum-java fixes this vulnerability. As a workaround, ensure that the source xml for instantiating UcumEssenceService is trusted.
|
|
CVE-2024-55879
|
Critical
|
2024-12-12
|
No exploit published
|
Proof of concept only
|
XWiki Platform is a generic wiki platform. Starting in version 2.3 and prior to versions 15.10.9, 16.3.0, any user with script rights can perform arbitrary remote code execution by adding instances of `XWiki.ConfigurableClass` to any page. This compromises the confidentiality, integrity and availability of the whole XWiki installation. This has been patched in XWiki 15.10.9 and 16.3.0. No known workarounds are available except upgrading.
|
|
CVE-2024-55877
|
Critical
|
2024-12-12
|
No exploit published
|
Proof of concept only
|
XWiki Platform is a generic wiki platform. Starting in version 9.7-rc-1 and prior to versions 15.10.11, 16.4.1, and 16.5.0, any user with an account can perform arbitrary remote code execution by adding instances of `XWiki.WikiMacroClass` to any page. This compromises the confidentiality, integrity and availability of the whole XWiki installation. This vulnerability has been fixed in XWiki 15.10.11, 16.4.1 and 16.5.0. It is possible to manually apply the patch to the page `XWiki.XWikiSyntaxMacrosList` as a workaround.
|
|
CVE-2024-55876
|
Medium
|
2024-12-12
|
No exploit published
|
Proof of concept only
|
XWiki Platform is a generic wiki platform. Starting in version 1.2-milestone-2 and prior to versions 15.10.9 and 16.3.0, any user with an account on the main wiki could run scheduling operations on subwikis. To reproduce, as a user on the main wiki without any special right, view the document `Scheduler.WebHome` in a subwiki. Then, click on any operation (*e.g.,* Trigger) on any job. If the operation is successful, then the instance is vulnerable. This has been patched in XWiki 15.10.9 and 16.3.0. As a workaround, those who have subwikis where the Job Scheduler is enabled can edit the objects on `Scheduler.WebPreferences` to match the patch.
|
|
CVE-2024-55875
|
Critical
|
2024-12-12
|
Protected by RASP
|
Proof of concept only
|
http4k is a functional toolkit for Kotlin HTTP applications. Prior to version 6.50.0.0, there is a potential XXE (XML External Entity Injection) vulnerability when http4k handling malicious XML contents within requests, which might allow attackers to read local sensitive information on server, trigger Server-side Request Forgery and even execute code under some circumstances. The original fix shipped in v5.41.0.0 / v4.50.0.0 closed the documented external-entity attack class (SSRF, local-file disclosure, code execution) by setting `ACCESS_EXTERNAL_DTD=""`, `ACCESS_EXTERNAL_SCHEMA=""`, and `isExpandEntityReferences=false` on the default `DocumentBuilderFactory`. A residual gap remained: the parser still accepted documents containing `<!DOCTYPE>` declarations even though external entity resolution was blocked. This left open billion-laughs-style internal entity expansion DoS attacks against any application using `Body.xml()` or `Document.asXmlDocument()` on untrusted XML. v6.50.0.0 closes this residual by adding `disallow-doctype-decl=true` and `FEATURE_SECURE_PROCESSING=true` to `defaultXmlParsingConfig`. Any document containing a `<!DOCTYPE>` is now rejected at parse time.
|
|
CVE-2024-55663
|
High
|
2024-12-12
|
No exploit published
|
No public exploit
|
XWiki Platform is a generic wiki platform. Starting in version 6.3-milestone-2 and prior to versions 13.10.5 and 14.3-rc-1, in `getdocument.vm`; the ordering of the returned documents is defined from an unsanitized request parameter (request.sort) and can allow any user to inject HQL. Depending on the used database backend, the attacker may be able to not only obtain confidential information such as password hashes from the database, but also execute UPDATE/INSERT/DELETE queries. This has been patched in 13.10.5 and 14.3-rc-1. There is no known workaround, other than upgrading XWiki.
|
|
CVE-2024-55662
|
Critical
|
2024-12-12
|
No exploit published
|
Proof of concept only
|
XWiki Platform is a generic wiki platform. Starting in version 3.3-milestone-1 and prior to versions 15.10.9 and 16.3.0, on instances where `Extension Repository Application` is installed, any user can execute any code requiring `programming` rights on the server. This vulnerability has been fixed in XWiki 15.10.9 and 16.3.0. Since `Extension Repository Application` is not mandatory, it can be safely disabled on instances that do not use it as a workaround. It is also possible to manually apply the patches from commit 8659f17d500522bf33595e402391592a35a162e8 to the page `ExtensionCode.ExtensionSheet` and to the page `ExtensionCode.ExtensionAuthorsDisplayer`.
|
|
CVE-2024-47606
|
High
|
2024-12-12
|
Mitigation candidate
|
No public exploit
|
GStreamer is a library for constructing graphs of media-handling components. An integer underflow has been detected in the function qtdemux_parse_theora_extension within qtdemux.c. The vulnerability occurs due to an underflow of the gint size variable, which causes size to hold a large unintended value when cast to an unsigned integer. This 32-bit negative value is then cast to a 64-bit unsigned integer (0xfffffffffffffffa) in a subsequent call to gst_buffer_new_and_alloc. The function gst_buffer_new_allocate then attempts to allocate memory, eventually calling _sysmem_new_block. The function _sysmem_new_block adds alignment and header size to the (unsigned) size, causing the overflow of the 'slice_size' variable. As a result, only 0x89 bytes are allocated, despite the large input size. When the following memcpy call occurs in gst_buffer_fill, the data from the input file will overwrite the content of the GstMapInfo info structure. Finally, during the call to gst_memory_unmap, the overwritten memory may cause a function pointer hijack, as the mem->allocator->mem_unmap_full function is called with a corrupted pointer. This function pointer overwrite could allow an attacker to alter the execution flow of the program, leading to arbitrary code execution. This vulnerability is fixed in 1.24.10.
|
|
CVE-2024-12397
|
High
|
2024-12-12
|
No exploit published
|
No public exploit
|
A flaw was found in Quarkus-HTTP, which incorrectly parses cookies with
certain value-delimiting characters in incoming requests. This issue could
allow an attacker to construct a cookie value to exfiltrate HttpOnly cookie
values or spoof arbitrary additional cookie values, leading to unauthorized
data access or modification. The main threat from this flaw impacts data
confidentiality and integrity.
|
|
CVE-2024-53677
|
Critical
|
2024-12-11
|
Protected by RASP
|
Proof of concept only
|
File upload logic in Apache Struts is flawed. An attacker can manipulate file upload params to enable paths traversal and under some circumstances this can lead to uploading a malicious file which can be used to perform Remote Code Execution.
This issue affects Apache Struts: from 2.0.0 before 6.4.0.
Users are recommended to upgrade to version 6.4.0 at least and migrate to the new file upload mechanism https://struts.apache.org/core-developers/file-upload . If you are not using an old file upload logic based on FileuploadInterceptor your application is safe.
You can find more details in https://cwiki.apache.org/confluence/display/WW/S2-067
|
|
CVE-2024-45761
|
High
|
2024-12-09
|
Protected by RASP
|
No public exploit
|
Dell OpenManage Server Administrator, versions 11.0.1.0 and prior, contains an improper input validation vulnerability. A remote low-privileged malicious user could potentially exploit this vulnerability to load any web plugins or Java class leading to the possibility of altering the behavior of certain apps/OS or Denial of Service.
|
|
CVE-2024-12369
|
Medium
|
2024-12-09
|
No exploit published
|
No public exploit
|
A vulnerability was found in OIDC-Client. When using the RH SSO OIDC adapter with EAP 7.x or when using the elytron-oidc-client subsystem with EAP 8.x, authorization code injection attacks can occur, allowing an attacker to inject a stolen authorization code into the attacker's own session with the client with a victim's identity. This is usually done with a Man-in-the-Middle (MitM) or phishing attack.
|
|
CVE-2024-54140
|
Low
|
2024-12-05
|
No exploit published
|
Proof of concept only
|
sigstore-java is a sigstore java client for interacting with sigstore infrastructure. sigstore-java has insufficient verification for a situation where a bundle provides a invalid signature for a checkpoint. This bug impacts clients using any variation of KeylessVerifier.verify(). Currently checkpoints are only used to ensure the root hash of an inclusion proof was provided by the log in question. Failing to validate that means a bundle may provide an inclusion proof that doesn't actually correspond to the log in question. This may eventually lead a monitor/witness being unable to detect when a compromised logs are providing different views of themselves to different clients. There are other mechanisms right now that mitigate this, such as the signed entry timestamp. Sigstore-java currently requires a valid signed entry timestamp. By correctly verifying the signed entry timestamp we can make certain assertions about the log signing the log entry (like the log was aware of the artifact signing event and signed it). Therefore the impact on clients that are not monitors/witnesses is very low. This vulnerability is fixed in 1.2.0.
|
|
CVE-2022-41137
|
High
|
2024-12-05
|
Protected by RASP
|
No public exploit
|
Apache Hive Metastore (HMS) uses SerializationUtilities#deserializeObjectWithTypeInformation method when filtering and fetching partitions that is unsafe and can lead to Remote Code Execution (RCE) since it allows the deserialization of arbitrary data.
In real deployments, the vulnerability can be exploited only by authenticated users/clients that were able to successfully establish a connection to the Metastore. From an API perspective any code that calls the unsafe method may be vulnerable unless it performs additional prerechecks on the input arguments.
|
|
CVE-2024-38829
|
Low
|
2024-12-04
|
No exploit published
|
No public exploit
|
A vulnerability in Spring LDAP allows data exposure for case sensitive comparisons.This issue affects Spring LDAP: from 2.4.0 through 2.4.3, from 3.0.0 through 3.0.9, from 3.1.0 through 3.1.7, from 3.2.0 through 3.2.7, AND all versions prior to 2.4.0.
The usage of String.toLowerCase() and String.toUpperCase() has some Locale dependent exceptions that could potentially result in unintended columns from being queried
Related to CVE-2024-38820 https://spring.io/security/cve-2024-38820
|
|
CVE-2024-45106
|
High
|
2024-12-03
|
No exploit published
|
No public exploit
|
Improper authentication of an HTTP endpoint in the S3 Gateway of Apache Ozone 1.4.0 allows any authenticated Kerberos user to revoke and regenerate the S3 secrets of any other user. This is only possible if:
* ozone.s3g.secret.http.enabled is set to true. The default value of this configuration is false.
* The user configured in ozone.s3g.kerberos.principal is also configured in ozone.s3.administrators or ozone.administrators.
Users are recommended to upgrade to Apache Ozone version 1.4.1 which disables the affected endpoint.
|
|
CVE-2024-53990
|
Critical
|
2024-12-02
|
No exploit published
|
Proof of concept only
|
The AsyncHttpClient (AHC) library allows Java applications to easily execute HTTP requests and asynchronously process HTTP responses. When making any HTTP request, the automatically enabled and self-managed CookieStore (aka cookie jar) will silently replace explicitly defined Cookies with any that have the same name from the cookie jar. For services that operate with multiple users, this can result in one user's Cookie being used for another user's requests.
|
|
CVE-2024-38827
|
Medium
|
2024-12-02
|
No exploit published
|
No public exploit
|
The usage of String.toLowerCase() and String.toUpperCase() has some Locale dependent exceptions that could potentially result in authorization rules not working properly.
|
|
CVE-2024-52800
|
Low
|
2024-11-29
|
Protected by RASP
|
No public exploit
|
veraPDF is an open source PDF/A validation library. Executing policy checks using custom schematron files via the CLI invokes an XSL transformation that may theoretically lead to a remote code execution (RCE) vulnerability. This doesn't affect the standard validation and policy checks functionality, veraPDF's common use cases. Most veraPDF users don't insert any custom XSLT code into policy profiles, which are based on Schematron syntax rather than direct XSL transforms. For users who do, only load custom policy files from sources you trust. This issue has not yet been patched. Users are advised to be cautious of XSLT code until a patch is available.
|
|
CVE-2024-35371
|
High
|
2024-11-29
|
No exploit published
|
No public exploit
|
Ant-Media-Serverv2.8.2 is affected by Improper Output Neutralization for Logs. The vulnerability stems from insufficient input sanitization in the logging mechanism. Without proper filtering or validation, user-controllable data, such as identifiers or other sensitive information, can be included in log entries without restrictions.
|
|
CVE-2024-54004
|
Medium
|
2024-11-27
|
No exploit published
|
No public exploit
|
Jenkins Filesystem List Parameter Plugin 0.0.14 and earlier does not restrict the path used for the File system objects list Parameter, allowing attackers with Item/Configure permission to enumerate file names on the Jenkins controller file system.
|
|
CVE-2024-54003
|
High
|
2024-11-27
|
No exploit published
|
Forecast only
|
Jenkins Simple Queue Plugin 1.4.4 and earlier does not escape the view name, resulting in a stored cross-site scripting (XSS) vulnerability exploitable by attackers with View/Create permission.
|
|
CVE-2024-53267
|
Medium
|
2024-11-26
|
No exploit published
|
Proof of concept only
|
sigstore-java is a sigstore java client for interacting with sigstore infrastructure. sigstore-java has insufficient verification for a situation where a validly-signed but "mismatched" bundle is presented as proof of inclusion into a transparency log. This bug impacts clients using any variation of KeylessVerifier.verify(). The verifier may accept a bundle with an unrelated log entry, cryptographically verifying everything but fails to ensure the log entry applies to the artifact in question, thereby "verifying" a bundle without any proof the signing event was logged. This allows the creation of a bundle without fulcio certificate and private key combined with an unrelated but time-correct log entry to fake logging of a signing event. A malicious actor using a compromised identity may want to do this to prevent discovery via rekor's log monitors. The signer's identity will still be available to the verifier. The signature on the bundle must still be on the correct artifact for the verifier to pass. sigstore-gradle-plugin and sigstore-maven-plugin are not affected by this as they only provide signing functionality. This issue has been patched in v1.1.0 release with PR #856. All users are advised to upgrade. There are no known workarounds for this vulnerability.
|
|
CVE-2024-9666
|
Medium
|
2024-11-25
|
No exploit published
|
No public exploit
|
A vulnerability was found in the Keycloak Server. The Keycloak Server is vulnerable to a denial of service (DoS) attack due to improper handling of proxy headers. When Keycloak is configured to accept incoming proxy headers, it may accept non-IP values, such as obfuscated identifiers, without proper validation. This issue can lead to costly DNS resolution operations, which an attacker could exploit to tie up IO threads and potentially cause a denial of service.
The attacker must have access to send requests to a Keycloak instance that is configured to accept proxy headers, specifically when reverse proxies do not overwrite incoming headers, and Keycloak is configured to trust these headers.
|
|
CVE-2024-10492
|
Low
|
2024-11-25
|
No exploit published
|
No public exploit
|
A vulnerability was found in Keycloak. A user with high privileges could read sensitive information from a Vault file that is not within the expected context. This attacker must have previous high access to the Keycloak server in order to perform resource creation, for example, an LDAP provider configuration and set up a Vault read file, which will only inform whether that file exists or not.
|
|
CVE-2024-10451
|
Medium
|
2024-11-25
|
No exploit published
|
No public exploit
|
A flaw was found in Keycloak. This issue occurs because sensitive runtime values, such as passwords, may be captured during the Keycloak build process and embedded as default values in bytecode, leading to unintended information disclosure. In Keycloak 26, sensitive data specified directly in environment variables during the build process is also stored as a default values, making it accessible during runtime. Indirect usage of environment variables for SPI options and Quarkus properties is also vulnerable due to unconditional expansion by PropertyMapper logic, capturing sensitive data as default values in all Keycloak versions up to 26.0.2.
|
|
CVE-2024-10270
|
Medium
|
2024-11-25
|
No exploit published
|
No public exploit
|
A vulnerability was found in the Keycloak-services package. If untrusted data is passed to the SearchQueryUtils method, it could lead to a denial of service (DoS) scenario by exhausting system resources due to a Regex complexity.
|
|
CVE-2024-52797
|
High
|
2024-11-21
|
No exploit published
|
No public exploit
|
Opencast is free and open source software for automated video capture and distribution. First noticed in Opencast 13 and 14, Opencast's Elasticsearch integration may generate syntactically invalid Elasticsearch queries in relation to previously acceptable search queries. From Opencast version 11.4 and newer, Elasticsearch queries are retried a configurable number of times in the case of error to handle temporary losses of connection to Elasticsearch. These invalid queries would fail, causing the retry mechanism to begin requerying with the same syntactically invalid query immediately, in an infinite loop. This causes a massive increase in log size which can in some cases cause a denial of service due to disk exhaustion.
Opencast 13.10 and Opencast 14.3 contain patches which address the base issue, with Opencast 16.7 containing changes which harmonize the search behaviour between the admin UI and external API. Users are strongly recommended to upgrade as soon as possible if running versions prior to 13.10 or 14.3. While the relevant endpoints require (by default) `ROLE_ADMIN` or `ROLE_API_SERIES_VIEW`, the problem queries are otherwise innocuous. This issue could be easily triggered by normal administrative work on an affected Opencast system. Those who run a version newer than 13.10 and 14.3 and see different results when searching in their admin UI vs your external API or LMS, may resolve the issue by upgrading to 16.7. No known workarounds for the vulnerability are available.
|
|
CVE-2024-52067
|
Medium
|
2024-11-21
|
No exploit published
|
No public exploit
|
Apache NiFi 1.16.0 through 1.28.0 and 2.0.0-M1 through 2.0.0-M4 include optional debug logging of Parameter Context values during the flow synchronization process. An authorized administrator with access to change logging levels could enable debug logging for framework flow synchronization, causing the application to write Parameter names and values to the application log. Parameter Context values may contain sensitive information depending on application flow configuration. Deployments of Apache NiFi with the default Logback configuration do not log Parameter Context values. Upgrading to Apache NiFi 2.0.0 or 1.28.1 is the recommendation mitigation, eliminating Parameter value logging from the flow synchronization process regardless of the Logback configuration.
|
|
CVE-2024-49203
|
Unknown
|
2024-11-20
|
Protected by RASP
|
Proof of concept only
|
Querydsl 5.1.0 and OpenFeign Querydsl 6.8 allows SQL/HQL injection in orderBy in JPAQuery. NOTE: this is disputed by a Querydsl community member because the product is not intended to defend against a developer who uses untrusted input directly in query construction.
|
|
CVE-2024-31141
|
Medium
|
2024-11-19
|
No exploit published
|
No public exploit
|
Files or Directories Accessible to External Parties, Improper Privilege Management vulnerability in Apache Kafka Clients.
Apache Kafka Clients accept configuration data for customizing behavior, and includes ConfigProvider plugins in order to manipulate these configurations. Apache Kafka also provides FileConfigProvider, DirectoryConfigProvider, and EnvVarConfigProvider implementations which include the ability to read from disk or environment variables.
In applications where Apache Kafka Clients configurations can be specified by an untrusted party, attackers may use these ConfigProviders to read arbitrary contents of the disk and environment variables.
In particular, this flaw may be used in Apache Kafka Connect to escalate from REST API access to filesystem/environment access, which may be undesirable in certain environments, including SaaS products.
This issue affects Apache Kafka Clients: from 2.3.0 through 3.5.2, 3.6.2, 3.7.0.
Users with affected applications are recommended to upgrade kafka-clients to version >=3.8.0, and set the JVM system property "org.apache.kafka.automatic.config.providers=none".
Users of Kafka Connect with one of the listed ConfigProvider implementations specified in their worker config are also recommended to add appropriate "allowlist.pattern" and "allowed.paths" to restrict their operation to appropriate bounds.
For users of Kafka Clients or Kafka Connect in environments that trust users with disk and environment variable access, it is not recommended to set the system property.
For users of the Kafka Broker, Kafka MirrorMaker 2.0, Kafka Streams, and Kafka command-line tools, it is not recommended to set the system property.
|
|
CVE-2024-52506
|
High
|
2024-11-18
|
No exploit published
|
No public exploit
|
Graylog is a free and open log management platform. The reporting functionality in Graylog allows the creation and scheduling of reports which contain dashboard widgets displaying individual log messages or metrics aggregated from fields of multiple log messages. This functionality, as included in Graylog 6.1.0 & 6.1.1, is vulnerable to information leakage triggered by multiple concurrent report rendering requests from authorized users. When multiple report renderings are requested at the same start time, the headless browser instance used to render the PDF will be reused. Depending on the timing, either a check for the browser instance "freshness" hits, resulting in an error instead of the report being returned, or one of the concurrent report rendering requests "wins" and this report is returned for all report rendering requests that do not return an error. This might lead to one user getting the report of a different user, potentially leaking indexed log messages or aggregated data that this user normally has no access to. This problem is fixed in Graylog 6.1.2. There is no known workaround besides disabling the reporting functionality.
|
|
CVE-2024-52318
|
Medium
|
2024-11-18
|
No exploit published
|
No public exploit
|
Incorrect object recycling and reuse vulnerability in Apache Tomcat.
This issue affects Apache Tomcat: 11.0.0, 10.1.31, 9.0.96.
Users are recommended to upgrade to version 11.0.1, 10.1.32 or 9.0.97, which fixes the issue.
|
|
CVE-2024-52317
|
Medium
|
2024-11-18
|
No exploit published
|
No public exploit
|
Incorrect object re-cycling and re-use vulnerability in Apache Tomcat. Incorrect recycling of the request and response used by HTTP/2 requests
could lead to request and/or response mix-up between users.
This issue affects Apache Tomcat: from 11.0.0-M23 through 11.0.0-M26, from 10.1.27 through 10.1.30, from 9.0.92 through 9.0.95.
Users are recommended to upgrade to version 11.0.0, 10.1.31 or 9.0.96, which fixes the issue.
|
|
CVE-2024-52316
|
Critical
|
2024-11-18
|
No exploit published
|
No public exploit
|
Unchecked Error Condition vulnerability in Apache Tomcat. If Tomcat is configured to use a custom Jakarta Authentication (formerly JASPIC) ServerAuthContext component which may throw an exception during the authentication process without explicitly setting an HTTP status to indicate failure, the authentication may not fail, allowing the user to bypass the authentication process. There are no known Jakarta Authentication components that behave in this way.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.0-M26, from 10.1.0-M1 through 10.1.30, from 9.0.0-M1 through 9.0.95.
The following versions were EOL at the time the CVE was created but are
known to be affected: 8.5.0 though 8.5.100. Other EOL versions may also be affected.
Users are recommended to upgrade to version 11.0.0, 10.1.31 or 9.0.96, which fix the issue.
|
|
CVE-2024-38828
|
Medium
|
2024-11-18
|
No exploit published
|
No public exploit
|
Spring MVC controller methods with an @RequestBody byte[] method parameter are vulnerable to a DoS attack.
|
|
CVE-2024-21287
|
High
|
2024-11-18
|
Protected by RASP
|
Exploited in the wild
|
Vulnerability in the Oracle Agile PLM Framework product of Oracle Supply Chain (component: Software Development Kit, Process Extension). The supported version that is affected is 9.3.6. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Agile PLM Framework. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Agile PLM Framework accessible data. CVSS 3.1 Base Score 7.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N).
|
|
CVE-2023-4639
|
High
|
2024-11-17
|
No exploit published
|
No public exploit
|
A flaw was found in Undertow, which incorrectly parses cookies with certain value-delimiting characters in incoming requests. This issue could allow an attacker to construct a cookie value to exfiltrate HttpOnly cookie values or spoof arbitrary additional cookie values, leading to unauthorized data access or modification. The main threat from this flaw impacts data confidentiality and integrity.
|
|
CVE-2023-1419
|
Medium
|
2024-11-17
|
No exploit published
|
No public exploit
|
A script injection vulnerability was found in the Debezium database connector, where it does not properly sanitize some parameters. This flaw allows an attacker to send a malicious request to inject a parameter that may allow the viewing of unauthorized data.
|
|
CVE-2023-0657
|
Low
|
2024-11-17
|
No exploit published
|
No public exploit
|
A flaw was found in Keycloak. This issue occurs due to improperly enforcing token types when validating signatures locally. This could allow an authenticated attacker to exchange a logout token for an access token and possibly gain access to data outside of enforced permissions.
|
|
CVE-2024-42499
|
Medium
|
2024-11-15
|
Protected by RASP
|
No public exploit
|
Improper limitation of a pathname to a restricted directory ('Path Traversal') issue exists in FitNesse releases prior to 20241026. If this vulnerability is exploited, an attacker may be able to know whether a file exists at a specific path, and/or obtain some part of the file contents under specific conditions.
|
|
CVE-2024-39610
|
Medium
|
2024-11-15
|
No exploit published
|
No public exploit
|
Cross-site scripting vulnerability exists in FitNesse releases prior to 20241026. If this vulnerability is exploited, an arbitrary script may be executed on the web browser of the user who is using the product.
|
|
CVE-2022-2232
|
High
|
2024-11-14
|
No exploit published
|
No public exploit
|
A flaw was found in the Keycloak package. This flaw allows an attacker to utilize an LDAP injection to bypass the username lookup or potentially perform other malicious actions.
|
|
CVE-2024-52554
|
High
|
2024-11-13
|
No exploit published
|
No public exploit
|
Jenkins Shared Library Version Override Plugin 17.v786074c9fce7 and earlier declares folder-scoped library overrides as trusted, so that they're not executed in the Script Security sandbox, allowing attackers with Item/Configure permission on a folder to configure a folder-scoped library override that runs without sandbox protection.
|
|
CVE-2024-52553
|
High
|
2024-11-13
|
No exploit published
|
No public exploit
|
Jenkins OpenId Connect Authentication Plugin 4.418.vccc7061f5b_6d and earlier does not invalidate the previous session on login.
|
|
CVE-2024-52552
|
High
|
2024-11-13
|
No exploit published
|
No public exploit
|
Jenkins Authorize Project Plugin 1.7.2 and earlier evaluates a string containing the job name with JavaScript on the Authorization view, resulting in a stored cross-site scripting (XSS) vulnerability exploitable by attackers with Item/Configure permission.
|
|
CVE-2024-52551
|
High
|
2024-11-13
|
No exploit published
|
No public exploit
|
Jenkins Pipeline: Declarative Plugin 2.2214.vb_b_34b_2ea_9b_83 and earlier does not check whether the main (Jenkinsfile) script used to restart a build from a specific stage is approved, allowing attackers with Item/Build permission to restart a previous build whose (Jenkinsfile) script is no longer approved.
|
|
CVE-2024-52550
|
High
|
2024-11-13
|
No exploit published
|
No public exploit
|
Jenkins Pipeline: Groovy Plugin 3990.vd281dd77a_388 and earlier, except 3975.3977.v478dd9e956c3 does not check whether the main (Jenkinsfile) script for a rebuilt build is approved, allowing attackers with Item/Build permission to rebuild a previous build whose (Jenkinsfile) script is no longer approved.
|
|
CVE-2024-52549
|
Medium
|
2024-11-13
|
No exploit published
|
No public exploit
|
Jenkins Script Security Plugin 1367.vdf2fc45f229c and earlier, except 1365.1367.va_3b_b_89f8a_95b_ and 1362.1364.v4cf2dc5d8776, does not perform a permission check in a method implementing form validation, allowing attackers with Overall/Read permission to check for the existence of files on the controller file system.
|
|
CVE-2024-47535
|
Medium
|
2024-11-12
|
No exploit published
|
Proof of concept only
|
Netty is an asynchronous event-driven network application framework for rapid development of maintainable high performance protocol servers & clients. An unsafe reading of environment file could potentially cause a denial of service in Netty. When loaded on an Windows application, Netty attempts to load a file that does not exist. If an attacker creates such a large file, the Netty application crashes. This vulnerability is fixed in 4.1.115.
|
|
CVE-2024-51135
|
Critical
|
2024-11-11
|
Protected by RASP
|
Proof of concept only
|
An XML External Entity (XXE) vulnerability in the component DocumentBuilderFactory of powertac-server v1.9.0 allows attackers to access sensitive information or execute arbitrary code via supplying a crafted request containing malicious XML entities.
|
|
CVE-2024-45087
|
Medium
|
2024-11-11
|
No fix identified
|
No public exploit
|
IBM WebSphere Application Server 8.5 and 9.0 is vulnerable to cross-site scripting. This vulnerability allows a privileged user to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session.
|
|
CVE-2024-52007
|
High
|
2024-11-08
|
Protected by RASP
|
No public exploit
|
HAPI FHIR is a complete implementation of the HL7 FHIR standard for healthcare interoperability in Java. XSLT parsing performed by various components are vulnerable to XML external entity injections. A processed XML file with a malicious DTD tag ( <!DOCTYPE foo [<!ENTITY example SYSTEM "/etc/passwd"> ]> could produce XML containing data from the host system. This impacts use cases where org.hl7.fhir.core is being used to within a host where external clients can submit XML. This is related to GHSA-6cr6-ph3p-f5rf, in which its fix (#1571 & #1717) was incomplete. This issue has been addressed in release version 6.4.0 and all users are advised to upgrade. There are no known workarounds for this vulnerability.
|
|
CVE-2024-51504
|
Critical
|
2024-11-07
|
No exploit published
|
No public exploit
|
When using IPAuthenticationProvider in ZooKeeper Admin Server there is a possibility of Authentication Bypass by Spoofing -- this only impacts IP based authentication implemented in ZooKeeper Admin Server. Default configuration of client's IP address detection in IPAuthenticationProvider, which uses HTTP request headers, is weak and allows an attacker to bypass authentication via spoofing client's IP address in request headers. Default configuration honors X-Forwarded-For HTTP header to read client's IP address. X-Forwarded-For request header is mainly used by proxy servers to identify the client and can be easily spoofed by an attacker pretending that the request comes from a different IP address. Admin Server commands, such as snapshot and restore arbitrarily can be executed on successful exploitation which could potentially lead to information leakage or service availability issues. Users are recommended to upgrade to version 3.9.3, which fixes this issue.
|
|
CVE-2024-38286
|
High
|
2024-11-07
|
No exploit published
|
No public exploit
|
Allocation of Resources Without Limits or Throttling vulnerability in Apache Tomcat.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.0-M20, from 10.1.0-M1 through 10.1.24, from 9.0.13 through 9.0.89.
The following versions were EOL at the time the CVE was created but are
known to be affected: 8.5.35 through 8.5.100 and 7.0.92 through 7.0.109. Other EOL versions may also be affected.
Users are recommended to upgrade to version 11.0.0-M21, 10.1.25, or 9.0.90, which fixes the issue.
Apache Tomcat, under certain configurations on any platform, allows an attacker to cause an OutOfMemoryError by abusing the TLS handshake process.
|
|
CVE-2023-1973
|
High
|
2024-11-07
|
No exploit published
|
No public exploit
|
A flaw was found in Undertow package. Using the FormAuthenticationMechanism, a malicious user could trigger a Denial of Service by sending crafted requests, leading the server to an OutofMemory error, exhausting the server's memory.
|
|
CVE-2023-1932
|
Medium
|
2024-11-07
|
No exploit published
|
No public exploit
|
A flaw was found in hibernate-validator's 'isValid' method in the org.hibernate.validator.internal.constraintvalidators.hv.SafeHtmlValidator class, which can be bypassed by omitting the tag ending in a less-than character. Browsers may render an invalid html, allowing HTML injection or Cross-Site-Scripting (XSS) attacks.
|
|
CVE-2024-51132
|
Critical
|
2024-11-05
|
Protected by RASP
|
Proof of concept only
|
An XML External Entity (XXE) vulnerability in HAPI FHIR before v6.4.0 allows attackers to access sensitive information or execute arbitrary code via supplying a crafted request containing malicious XML entities.
|
|
CVE-2024-51127
|
Critical
|
2024-11-04
|
No exploit published
|
No public exploit
|
An issue in the createTempFile method of hornetq v2.4.9 allows attackers to arbitrarily overwrite files or access sensitive information.
|
|
CVE-2024-45086
|
Medium
|
2024-11-04
|
Protected by RASP
|
No public exploit
|
IBM WebSphere Application Server 8.5 and 9.0 is vulnerable to an XML external entity injection (XXE) attack when processing XML data. A privileged user could exploit this vulnerability to expose sensitive information or consume memory resources.
|
|
CVE-2024-23590
|
Critical
|
2024-11-04
|
No exploit published
|
No public exploit
|
Session Fixation vulnerability in Apache Kylin.
This issue affects Apache Kylin: from 2.0.0 through 4.x.
Users are recommended to upgrade to version 5.0.0 or above, which fixes the issue.
|
|
CVE-2024-48307
|
Critical
|
2024-10-31
|
Protected by RASP
|
Working exploit published
|
JeecgBoot v3.7.1 was discovered to contain a SQL injection vulnerability via the component /onlDragDatasetHead/getTotalData.
|
|
CVE-2024-43382
|
Medium
|
2024-10-30
|
No exploit published
|
No public exploit
|
Snowflake JDBC driver versions >= 3.2.6 and <= 3.19.1 have an Incorrect Security Setting that can result in data being uploaded to an encrypted stage without the additional layer of protection provided by client side encryption.
|
|
CVE-2024-45477
|
Medium
|
2024-10-29
|
No exploit published
|
No public exploit
|
Apache NiFi 1.10.0 through 1.27.0 and 2.0.0-M1 through 2.0.0-M3 support a description field for Parameters in a Parameter Context configuration that is vulnerable to cross-site scripting. An authenticated user, authorized to configure a Parameter Context, can enter arbitrary JavaScript code, which the client browser will execute within the session context of the authenticated user. Upgrading to Apache NiFi 1.28.0 or 2.0.0-M4 is the recommended mitigation.
|
|
CVE-2024-49771
|
Medium
|
2024-10-28
|
Protected by RASP
|
No public exploit
|
MPXJ is an open source library to read and write project plans from a variety of file formats and databases. The patch for the historical vulnerability CVE-2020-35460 in MPXJ is incomplete as there is still a possibility that a malicious path could be constructed which would not be picked up by the original fix and allow files to be written to arbitrary locations. The issue is addressed in MPXJ version 13.5.1.
|
|
CVE-2024-38821
|
Critical
|
2024-10-28
|
No exploit published
|
No public exploit
|
Spring WebFlux applications that have Spring Security authorization rules on static resources can be bypassed under certain circumstances.
For this to impact an application, all of the following must be true:
* It must be a WebFlux application
* It must be using Spring's static resources support
* It must have a non-permitAll authorization rule applied to the static resources support
|
|
CVE-2024-49760
|
High
|
2024-10-24
|
Protected by RASP
|
No public exploit
|
OpenRefine is a free, open source tool for working with messy data. The load-language command expects a `lang` parameter from which it constructs the path of the localization file to load, of the form `translations-$LANG.json`. But when doing so in versions prior to 3.8.3, it does not check that the resulting path is in the expected directory, which means that this command could be exploited to read other JSON files on the file system. Version 3.8.3 addresses this issue.
|
|
CVE-2024-47883
|
Critical
|
2024-10-24
|
Protected by RASP
|
Proof of concept only
|
The OpenRefine fork of the MIT Simile Butterfly server is a modular web application framework. The Butterfly framework uses the `java.net.URL` class to refer to (what are expected to be) local resource files, like images or templates. This works: "opening a connection" to these URLs opens the local file. However, prior to version 1.2.6, if a `file:/` URL is directly given where a relative path (resource name) is expected, this is also accepted in some code paths; the app then fetches the file, from a remote machine if indicated, and uses it as if it was a trusted part of the app's codebase. This leads to multiple weaknesses and potential weaknesses. An attacker that has network access to the application could use it to gain access to files, either on the the server's filesystem (path traversal) or shared by nearby machines (server-side request forgery with e.g. SMB). An attacker that can lead or redirect a user to a crafted URL belonging to the app could cause arbitrary attacker-controlled JavaScript to be loaded in the victim's browser (cross-site scripting). If an app is written in such a way that an attacker can influence the resource name used for a template, that attacker could cause the app to fetch and execute an attacker-controlled template (remote code execution). Version 1.2.6 contains a patch.
|
|
CVE-2024-47882
|
Medium
|
2024-10-24
|
No exploit published
|
Proof of concept only
|
OpenRefine is a free, open source tool for working with messy data. Prior to version 3.8.3, the built-in "Something went wrong!" error page includes the exception message and exception traceback without escaping HTML tags, enabling injection into the page if an attacker can reliably produce an error with an attacker-influenced message. It appears that the only way to reach this code in OpenRefine itself is for an attacker to somehow convince a victim to import a malicious file, which may be difficult. However, out-of-tree extensions may add their own calls to `respondWithErrorPage`. Version 3.8.3 has a fix for this issue.
|
|
CVE-2024-47881
|
High
|
2024-10-24
|
Protected by RASP
|
Proof of concept only
|
OpenRefine is a free, open source tool for working with messy data. Starting in version 3.4-beta and prior to version 3.8.3, in the `database` extension, the "enable_load_extension" property can be set for the SQLite integration, enabling an attacker to load (local or remote) extension DLLs and so run arbitrary code on the server. The attacker needs to have network access to the OpenRefine instance. Version 3.8.3 fixes this issue.
|
|
CVE-2024-47880
|
High
|
2024-10-24
|
No exploit published
|
Proof of concept only
|
OpenRefine is a free, open source tool for working with messy data. Prior to version 3.8.3, the `export-rows` command can be used in such a way that it reflects part of the request verbatim, with a Content-Type header also taken from the request. An attacker could lead a user to a malicious page that submits a form POST that contains embedded JavaScript code. This code would then be included in the response, along with an attacker-controlled `Content-Type` header, and so potentially executed in the victim's browser as if it was part of OpenRefine. The attacker-provided code can do anything the user can do, including deleting projects, retrieving database passwords, or executing arbitrary Jython or Closure expressions, if those extensions are also present. The attacker must know a valid project ID of a project that contains at least one row. Version 3.8.3 fixes the issue.
|
|
CVE-2024-47879
|
High
|
2024-10-24
|
No exploit published
|
Proof of concept only
|
OpenRefine is a free, open source tool for working with messy data. Prior to version 3.8.3, lack of cross-site request forgery protection on the `preview-expression` command means that visiting a malicious website could cause an attacker-controlled expression to be executed. The expression can contain arbitrary Clojure or Python code. The attacker must know a valid project ID of a project that contains at least one row, and the attacker must convince the victim to open a malicious webpage. Version 3.8.3 fixes the issue.
|
|
CVE-2024-47878
|
High
|
2024-10-24
|
No exploit published
|
Proof of concept only
|
OpenRefine is a free, open source tool for working with messy data. Prior to version 3.8.3, the `/extension/gdata/authorized` endpoint includes the `state` GET parameter verbatim in a `<script>` tag in the output, so without escaping. An attacker could lead or redirect a user to a crafted URL containing JavaScript code, which would then cause that code to be executed in the victim's browser as if it was part of OpenRefine. Version 3.8.3 fixes this issue.
|
|
CVE-2024-45031
|
Medium
|
2024-10-24
|
No exploit published
|
No public exploit
|
When editing objects in the Syncope Console, incomplete HTML tags could be used to bypass HTML sanitization. This made it possible to inject stored XSS payloads which would trigger for other users during ordinary usage of the application.
XSS payloads could also be injected in Syncope Enduser when editing “Personal Information” or “User Requests”: such payloads would trigger for administrators in Syncope Console, thus enabling session hijacking.
Users are recommended to upgrade to version 3.0.9, which fixes this issue.
|
|
CVE-2024-8980
|
Critical
|
2024-10-22
|
No exploit published
|
No public exploit
|
The Script Console in Liferay Portal 7.0.0 through 7.4.3.101, and Liferay DXP 2023.Q3.1 through 2023.Q3.4, 7.4 GA through update 92, 7.3 GA through update 35, 7.2 GA through fix pack 20, 7.1 GA through fix pack 28, 7.0 GA through fix pack 102 and 6.2 GA through fix pack 173
does not sufficiently protect against Cross-Site Request Forgery (CSRF) attacks, which allows remote attackers to execute arbitrary Groovy script via a crafted URL or a XSS vulnerability.
|
|
CVE-2024-38002
|
Critical
|
2024-10-22
|
No exploit published
|
No public exploit
|
The workflow component in Liferay Portal 7.3.2 through 7.4.3.111, and Liferay DXP 2023.Q4.0 through 2023.Q4.5, 2023.Q3.1 through 2023.Q3.8, 7.4 GA through update 92 and 7.3 GA through update 36 does not properly check user permissions before updating a workflow definition, which allows remote authenticated users to modify workflow definitions and execute arbitrary code (RCE) via the headless API.
|
|
CVE-2024-26273
|
High
|
2024-10-22
|
No exploit published
|
No public exploit
|
Cross-site request forgery (CSRF) vulnerability in the content page editor in Liferay Portal 7.4.0 through 7.4.3.103, and Liferay DXP 2023.Q4.0 through 2023.Q4.2, 2023.Q3.1 through 2023.Q3.5, 7.4 GA through update 92 and 7.3 update 29 through update 35 allows remote attackers to (1) change user passwords, (2) shut down the server, (3) execute arbitrary code in the scripting console, (4) and perform other administrative actions via the _com_liferay_commerce_catalog_web_internal_portlet_CommerceCatalogsPortlet_redirect parameter.
|
|
CVE-2024-26272
|
High
|
2024-10-22
|
No exploit published
|
No public exploit
|
Cross-site request forgery (CSRF) vulnerability in the content page editor in Liferay Portal 7.3.2 through 7.4.3.107, and Liferay DXP 2023.Q4.0 through 2023.Q4.2, 2023.Q3.1 through 2023.Q3.5, 7.4 GA through update 92 and 7.3 GA through update 35 allows remote attackers to (1) change user passwords, (2) shut down the server, (3) execute arbitrary code in the scripting console, (4) and perform other administrative actions via the p_l_back_url parameter.
|
|
CVE-2024-26271
|
High
|
2024-10-22
|
No exploit published
|
No public exploit
|
Cross-site request forgery (CSRF) vulnerability in the My Account widget in Liferay Portal 7.4.3.75 through 7.4.3.111, and Liferay DXP 2023.Q4.0 through 2023.Q4.2, 2023.Q3.1 through 2023.Q3.5, 7.4 update 75 through update 92 and 7.3 update 32 through update 36 allows remote attackers to (1) change user passwords, (2) shut down the server, (3) execute arbitrary code in the scripting console, (4) and perform other administrative actions via the _com_liferay_my_account_web_portlet_MyAccountPortlet_backURL parameter.
|
|
CVE-2024-10234
|
High
|
2024-10-22
|
No exploit published
|
No public exploit
|
A vulnerability was found in Wildfly, where a user may perform Cross-site scripting in the Wildfly deployment system. This flaw allows an attacker or insider to execute a deployment with a malicious payload, which could trigger undesired behavior against the server.
|
|
CVE-2024-38820
|
Medium
|
2024-10-18
|
Mitigation candidate
|
No public exploit
|
The fix for CVE-2022-22968 made disallowedFields patterns in DataBinder case insensitive. However, String.toLowerCase() has some Locale dependent exceptions that could potentially result in fields not protected as expected.
|