High Apache CVEs

716 CVEs, 30 exploited, 183 protected by Waratek

Look up CVE IDs Status Exploitation Severity

Reset

Overview 716 matches · 180 protected · 30 exploited · 13 CISA KEV · 64 public PoC · 56 EPSS ≥ 0.5

716matches 180protected25.1% 30exploited4.2% 13CISA KEV1.8% 64public PoC8.9% 56EPSS ≥ 0.57.8%

Protected by Waratek 183 25.6% Rule in development 0 0.0% Mitigation candidate 35 4.9% No exploit published 498 69.6%

Critical 0 0.0% High 716 100.0% Medium 0 0.0% Low 0 0.0% None 0 0.0% Unknown 0 0.0%

blocked by ARMR today 180 25.1% partly blocked 3 0.4% not blocked 533 74.4% not established 0 0.0% unrecorded 0 0.0%

Exploited 30 4.2% Working exploit published 28 3.9% Proof of concept only 12 1.7% Forecast only 11 1.5% No public exploit 635 88.7%

split by StatusSeverityProtectionExploit maturity peak 185 / year

200220052008201120142017202020232026

716 matches Sign in to download these CVEs as CSV or JSON, or to follow them in a feed.

CVE	Severity	Published▾	Status	Exploitation	Description
CVE-2026-88900	High	2026-10-19	Protected by Waratek	No public exploit	Deserialization of Untrusted Data vulnerability in Apache Camel Camel-Jgroups component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. JGroupsEndpoint.createExchange(Message), which CamelJGroupsReceiver calls for every message the jgroups consumer receives before the exchange is routed, set the exchange body from org.jgroups.Message.getObject(). For an ObjectMessage, which is the message type the Camel jgroups producer sends, JGroups Java-deserializes the payload through an ObjectInputStream on its own receive thread as the message arrives, and getObject() returns the resulting object. No java.io.ObjectInputFilter was applied on that path unless the deployment had set a JVM-wide serialization filter: camel-jgroups installed none, and the JGroups versions shipped with the affected releases apply none of their own, so any serializable class on the application classpath could be instantiated and its deserialization callbacks run. Unless a channel or the channelProperties option is configured, the consumer creates its channel with new JChannel(), the stock JGroups protocol stack, which multicasts over UDP without the AUTH protocol and without encryption, so any host able to reach the cluster's multicast group or bind port can join the cluster and send messages to the consumer without credentials. Such a host could send a crafted serialized object that leads to remote code execution in the Camel process when a usable deserialization gadget chain is present on the classpath, and no non-default option was required on the consumer. Because JGroups materializes the object before Camel's receiver runs, a check performed by Camel can only inspect the deserialized result and cannot stop code that runs during deserialization, so closing the issue also requires a control that applies before the payload is read, as described in the mitigation. Exploitation requires network access to the cluster's multicast group or bind port, which with the default UDP multicast transport means a host on an adjacent network, and a usable gadget chain on the classpath, which is why the severity is assessed as high rather than critical. Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.1. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.14.x releases stream and earlier, and the 4.15.x to 4.17.x and 4.19.x to 4.21.x release lines, reached end of life before this issue was resolved and will not receive a fix, so deployments on those lines must move to a supported release.
CVE-2026-85251	High	2026-10-19	No exploit published	No public exploit	Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache Camel HTTP component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. Two paths handed credentials to a redirect target, which is a host chosen by the remote server rather than by the route, once followRedirects=true. OAuth2ClientConfigurer registers its interceptor with addRequestInterceptorFirst, and HttpClient runs protocol-level request interceptors inside ProtocolExec, which sits below RedirectExec in the exec chain; the interceptor therefore ran again for every redirect hop and re-attached Authorization: Bearer to whatever host the Location header named. Separately, credentials were registered against an AuthScope matching any host, so basic and digest credentials were presented to a redirect target as well. A remote endpoint - or anyone who can influence its responses - could therefore collect the bearer token or the configured credentials simply by answering with a redirect to a host it controls. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. Credentials are now sent only to the authority the endpoint was configured with, and are not re-attached when a redirect crosses to another host. For deployments that cannot upgrade immediately, set followRedirects=false on endpoints that carry credentials, and handle any redirect explicitly in the route so that the destination is chosen by the route rather than by the remote server.
CVE-2026-85250	High	2026-10-19	Protected by Waratek	No public exploit	Improper Restriction of XML External Entity Reference vulnerability in Apache Camel XPath component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. With documentType set to InputSource, XPathBuilder handed the payload straight to javax.xml.xpath, which builds a DocumentBuilder of its own using the JDK defaults. The hardening applied to Camel's default document type was therefore bypassed: a DOCTYPE declaration that is refused on the default type was accepted here, and the external entity it declared was resolved and expanded into the evaluated document. An external sender whose XML reaches such an expression could read files readable by the Camel process and cause the process to issue requests to hosts it names. The two document types disagreeing on parser configuration is what made this reachable, since a deployment choosing InputSource for streaming reasons had no indication it was also choosing a weaker parser. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The InputSource document type now goes through the same hardened parser as the default type, so a DOCTYPE is refused. Note that it also shares that type's documented escape hatch: the same DocumentBuilderFactory system properties that relax the default type relax this one, so a deployment that has set them remains unprotected by design. For deployments that cannot upgrade immediately, do not use documentType=InputSource on expressions evaluated over untrusted XML; the default document type already refuses a DOCTYPE.
CVE-2026-80344	High	2026-10-19	No exploit published	No public exploit	Server-Side Request Forgery (SSRF) vulnerability in Apache Camel AS2 component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. In the AS2 protocol the sender of a message may request that the Message Disposition Notification be returned asynchronously to an address the sender supplies. camel-as2 took that address from the inbound message and used it as the destination for the outgoing receipt without constraining it to anything the deployment had configured. A remote partner therefore chose the host the Camel instance would connect to when delivering the MDN. That gives server-side request forgery from the position of the AS2 receiver, including reaching hosts that are only routable from inside the deployment's network, and where the outbound connection carries credentials configured for MDN delivery those credentials are presented to the attacker-chosen destination. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The asynchronous MDN destination is now constrained rather than taken verbatim from the inbound message. For deployments that cannot upgrade immediately, restrict outbound connectivity from the AS2 receiver to the partner endpoints it legitimately delivers receipts to, and do not attach credentials to MDN delivery that are valid for any host other than those partners.
CVE-2026-80343	High	2026-10-19	No exploit published	No public exploit	Improper Handling of Case Sensitivity vulnerability in Apache Camel Netty HTTP component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. The camel-netty-http security constraint compared the request path against the configured context path using a case-sensitive match, while the routing that dispatches the request to the endpoint did not apply the same rule. The two comparisons therefore disagreed for any path whose case differed from the configured value. An external caller could alter the case of a character in a path segment so that the security constraint no longer recognised the path as protected, while the request still dispatched to the same endpoint. The result is that the constraint is skipped and the protected route is reached without satisfying it. No credential, prior access or special configuration is required beyond being able to send a request to the consumer. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The constraint now matches the request path with the same case rules the dispatch uses, so the two can no longer disagree. For deployments that cannot upgrade immediately, place the authorization decision in front of the Camel consumer, for example in a reverse proxy that normalises the request path before forwarding.
CVE-2026-97791	High	2026-10-09	No exploit published	No public exploit	In Apache CXF, STSTokenValidator checks whether a SAML assertion is signed by a trusted certificate before deciding to send it to the STS. That result was stored in one object shared by all requests, so one request could read another's result. A remote, unauthenticated attacker could send a forged assertion signed with an untrusted certificate while legitimate requests were being processed, and it could be accepted as trusted without ever reaching the STS. Only services that use STSTokenValidator to validate SAML tokens without alwaysValidateToSts set are affected. Users are recommended to upgrade to versions 4.2.4 or 4.1.9 or 3.6.13, which fix this issue.
CVE-2026-86463	High	2026-10-09	No exploit published	No public exploit	Apache CXF's FIQL query parser has a vulnerability in how it searches for operators in query expressions. The search pattern can get stuck trying many combinations when it encounters a long string without an operator, causing the parser to consume excessive CPU time. An attacker can send a crafted query to make the server use up CPU resources, potentially slowing down or stopping other requests. The fix was to limit FIQL expressions to 4 KiB by default, preventing attackers from sending extremely long inputs while still allowing normal queries. Users are recommended to upgrade to versions 4.2.4 or 4.1.9 or 3.6.13, which fix this issue.
CVE-2026-78384	High	2026-10-09	No exploit published	No public exploit	CompressionUtils.inflate() decompressed attacker-controlled DEFLATE data with no output-size cap. A small (~KB) crafted payload could expand to gigabytes on the heap. Reachable via JWE decryption when zip=DEF (e.g. JoseSessionTokenProvider with RSA-OAEP key wrap) and via SAML redirect/POST binding token inflation — in both cases decompression happens before/independent of trust validation. Fix: Added a configurable maximum inflated-size cap (default 10 MiB, org.apache.cxf.compression-max-inflated-size system property) to CompressionUtils.inflate(); aborts with DataFormatException once exceeded. Users are recommended to upgrade to versions 4.2.4 or 4.1.9 or 3.6.13, which fix this issue.
CVE-2026-73179	High	2026-10-09	No exploit published	No public exploit	Improper enforcement of single-use authorization code semantics in the JPA OAuth2 authorization code grant provider in Apache CXFallows a remote attacker to obtain multiple valid access tokens from a single authorization code via concurrent token exchange requests that race the non-atomic find-then-delete operation against a shared relational database under READ_COMMITTED isolation. Users are recommended to upgrade to versions 4.2.4 or 4.1.9 or 3.6.13, which fixes this issue.
CVE-2026-108039	High	2026-10-09	No exploit published	No public exploit	By default, StaxUtils placed no limit on the total number of elements or the total number of characters in an XML document. A very large request could therefore use a lot of memory and CPU during parsing, especially where CXF builds a DOM from the input (for example SAAJ or WS-Security), and could cause a denial of service when no request size limit was configured. Both limits now have defaults: the maximum element count is 100 × maxChildElements (5,000,000 by default), and the maximum document size is 256M characters. Applications that process larger documents can raise the limits with the org.apache.cxf.stax.maxElementCount and org.apache.cxf.stax.maxXMLCharacters properties. Users are recommended to upgrade to versions 4.2.4 or 4.1.9 or 3.6.13, which fix this issue.
CVE-2026-107937	High	2026-10-09	No exploit published	No public exploit	In Apache CXF, the parser for multipart/MTOM attachment part headers did not fully enforce the configured attachment-max-header-size (default 300 characters) and attachment-headers-max-count (default 500) limits. The size limit was applied only to each physical line, not to a header value built from continuation lines or to the combined values of a repeated header. The count limit was checked against the number of distinct header names, not the total number of header lines. A remote, unauthenticated attacker could send a multipart request with very large folded or repeated part headers. The server would then allocate memory without bound, causing a denial of service. Users are recommended to upgrade to versions 4.2.4 or 4.1.9 or 3.6.13, which fix this issue.
CVE-2026-100227	High	2026-10-09	No exploit published	No public exploit	Improper Verification of Cryptographic Signature vulnerability in Apache CXF's JAX-RS XML Security module. The JAX-RS XML Signature interceptors (XmlSigInHandler, XmlSigInInterceptor and the streaming XmlSecInInterceptor) did not ensure that the XML passed to the application was covered by the signature. An attacker with any document signed by a trusted key could wrap it in unsigned content, which the application would then treat as signed. Users are recommended to upgrade to versions 4.2.4 or 4.1.9 or 3.6.13, which fix this issue.
CVE-2026-104714	High	2026-10-05	No exploit published	No public exploit	Concurrent execution using shared resource with improper synchronization ('race condition') vulnerability in Apache Struts. Where a localized message formats a date or time argument, the formatter retained for that message by the application-wide text provider is used by concurrently served requests without isolation, so a value belonging to one user can appear in another user's response, or the rendering can fail and surface as a server error. Applications whose localized messages format no date or time arguments are not affected. This issue affects Apache Struts: from 2.0.0 through 2.3.37, from 2.5.0 through 2.5.33, from 6.0.0 through 6.11.0, from 7.0.0 through 7.3.0. Users are recommended to upgrade to version 6.12.0 or 7.4.0, which fixes the issue.
CVE-2026-104712	High	2026-10-05	No exploit published	No public exploit	Asymmetric resource consumption (amplification) vulnerability in Apache Struts. When a request parameter is bound to an arbitrary-precision decimal (java.math.BigDecimal) property that is then rendered through the Struts tag library, the framework can produce a response many orders of magnitude larger than the request, allowing an unauthenticated remote attacker to exhaust server CPU and outbound network capacity with sustained low-volume traffic. Applications that do not bind request parameters to BigDecimal properties, or never render such a property through the Struts tag library, are not affected. This issue affects Apache Struts: from 2.5.14 through 2.5.33, from 6.0.0 through 6.11.0, from 7.0.0 through 7.3.0. Users are recommended to upgrade to version 6.12.0 or 7.4.0, which fixes the issue.
CVE-2026-95616	High	2026-09-30	No exploit published	No public exploit	An integer overflow in WSS4J's DER bounds check lets an oversized allocation pass validation. An unauthenticated attacker can send a SOAP message carrying an X.509 certificate whose SubjectKeyIdentifier extension declares a length of 0x7FFFFFFF; WSS4J decodes this while resolving the signature's key reference, before the message is authenticated, so an eleven-byte extension triggers a 2 GB allocation. Repeated requests exhaust server memory. Users are recommended to upgrade to versions 4.0.2 or 3.0.6 or 2.4.4, which fix this issue.
CVE-2026-92121	High	2026-09-30	No exploit published	No public exploit	In the WSS4J streaming (StAX) code, a signature reference using the WS-Security STR-Transform leaves an internal "inside signed content" flag permanently set. The WS-SecurityPolicy enforcer uses that flag to decide whether an element needs checking, so it stops evaluating SignedParts and SignedElements for the rest of the message. A policy requiring the SOAP Body to be signed is then satisfied even when the Body carries no signature, removing the protection against XML Signature Wrapping. Signature verification itself is unaffected. The DOM code is not affected. Users are recommended to upgrade to versions 4.0.2 or 3.0.6 or 2.4.4 which fix this issue.
CVE-2026-85532	High	2026-09-30	No exploit published	No public exploit	Apache WSS4J accepted attacker-controlled derived-key lengths and offsets without adequate bounds. This could permit cryptographically weak keys or excessive CPU and memory consumption when processing crafted WS-Security messages. The fixes enforce a minimum key length of 16 bytes, a maximum length of 512 bytes, and a maximum offset of 4096 bytes. Users are recommended to upgrade to versions 4.0.2 or 3.0.6 or 2.4.4, which fix this issue.
CVE-2026-102497	High	2026-09-29	No exploit published	No public exploit	The Apache XmlSchema walker (xmlschema-walker) doesn't detect cycles in type derivation, substitution groups, model groups or attribute groups. A malicious schema with such a cycle can make the walker recurse until the stack overflows, causing a denial of service. Users are recommended to upgrade to version 2.3.3, which fixes this issue.
CVE-2026-102496	High	2026-09-29	No exploit published	No public exploit	Apache XmlSchema doesn't limit how deeply schema structures can be nested when it builds its schema model, so a malicious schema can make parsing recurse until the stack overflows. This causes a denial of service. Users are recommended to upgrade to version 2.3.3, which fixes this issue.
CVE-2026-102495	High	2026-09-29	No exploit published	No public exploit	Apache XmlSchema doesn't limit how deeply schema imports and includes can be nested, so a malicious schema can make parsing recurse until the stack overflows. This causes a denial of service. Users are recommended to upgrade to version 2.3.3, which fixes this issue.
CVE-2026-91006	High	2026-09-28	Protected by Waratek	No public exploit	Apache Karaf's instance-management service (InstanceServiceImpl) builds the command line used to launch a child Karaf JVM by string concatenation, then executes it through /bin/sh (Unix) or cscript (Windows). The caller-supplied javaOpts value is spliced into that string unquoted. A javaOpts value containing shell metacharacters (;, \|, `, $(...)) is interpreted by the shell instead of being passed to the JVM as an option, giving arbitrary OS command execution as the Karaf process user. Reachable via the shell commands instance:create, instance:start, instance:restart, instance:change-opts, and the equivalent InstanceMBean JMX operations (createInstance, startInstance, changeJavaOpts, cloneInstance). Mitigation * Set karaf.secured.command.compulsory.roles=admin in etc/system.properties to close the fail-open gap for all unconfigured command scopes. * Restrict which principals can reach instance:* commands and InstancesMBean via etc/users.properties role assignments. * Treat javaOpts passed to instance:create/instance:start/instance:change-opts/InstancesMBean as untrusted input only from fully-trusted operators.
CVE-2026-92608	High	2026-09-25	No exploit published	No public exploit	Improper handling of property-encoding exceptions in AMQP 1.0-to-AMQP 0-10 message conversion allows authenticated message producers to disrupt delivery to AMQP 0-10 consumers via message properties that the target encoder does not handle correctly. This issue affects Apache Qpid Broker-J: through 10.1.0. Users are recommended to upgrade to version 10.1.1, which fixes the issue.
CVE-2026-92564	High	2026-09-25	No exploit published	No public exploit	A pre-authentication attacker could leverage type nesting to cause a StackOverflowError potentially leading to denial of service. This issue affects Apache Qpid Broker-J: through 10.1.0. Users are recommended to upgrade to version 10.1.1, which fixes the issue.
CVE-2026-92560	High	2026-09-25	No exploit published	No public exploit	A pre-authentication attacker could leverage type size/count handling to cause excessive allocation leading to potential denial of service. This issue affects Apache Qpid Broker-J: through 10.1.0. Users are recommended to upgrade to version 10.1.1, which fixes the issue.
CVE-2026-92550	High	2026-09-25	No exploit published	No public exploit	A pre-authentication attacker could leverage type size/count handling to cause excessive allocation leading to potential denial of service. This issue affects Apache Qpid Broker-J: through 10.1.0. Users are recommended to upgrade to version 10.1.1, which fixes the issue.
CVE-2026-91866	High	2026-09-21	No exploit published	No public exploit	A specially crafted pair of WS-Policy documents can force Neethi's policy-intersection to do exponential amounts of work, pinning the CPU for a long time (denial of service). Users are recommended to upgrade to version 3.2.4, which fixes this issue.
CVE-2026-91865	High	2026-09-21	No exploit published	No public exploit	A small WS-Policy document using repeated policy references can force Neethi to re-expand the same references exponentially during normalization, consuming huge amounts of CPU and memory (denial of service). Users are recommended to upgrade to version 3.2.4, which fixes this issue.
CVE-2026-91864	High	2026-09-21	No exploit published	No public exploit	A specially crafted WS-Policy document can pack unlimited content inside a policy assertion, which Neethi copies into memory without counting it against its size limits, exhausting the heap (denial of service). Users are recommended to upgrade to version 3.2.4, which fixes this issue.
CVE-2026-91863	High	2026-09-21	No exploit published	No public exploit	A specially crafted WS-Policy document with deeply nested policy elements can bypass Neethi's nesting-depth limit and exhaust the thread stack, crashing the parser (denial of service). Users are recommended to upgrade to version 3.2.4, which fixes this issue.
CVE-2026-87976	High	2026-09-16	Protected by Waratek	No public exploit	Apache NiFi Registry 0.4.0 through 2.11.0 are subject to path manipulation when storing extension bundle content using group, artifact, and version coordinates from uploaded NAR manifests. The default file persistence provider used coordinates as filesystem path components without rejected parent-directory names, and the path-containment check compared an unnormalized resolved path. An authenticated user authorized to write and delete bundles in a bucket can upload a NAR with a crafted manifest resulting in file system operations outside of the file persistence directory. Upgrading to Apache NiFi Registry 2.12.0 is the recommended mitigation, which rejects parent-directory coordinates and requires a normalized path to remain a strict child of the storage root location.
CVE-2026-79993	High	2026-09-16	No exploit published	No public exploit	The `deleteContainer` opcode (0x14/20) is processed without verifying the caller's ACL permissions, allowing any authenticated client to delete specific znodes in the data tree regardless of the ACL restrictions on the znode or its parent. This opcode is considered internal-only and the official client doesn't have API for it, but a client that can open a plain TCP session on the ZooKeeper client port (2181 by default) - with NO authentication and NO ACL permissions - can delete any empty persistent znode (including regular persistent nodes, container nodes, and TTL nodes) by issuing the raw protocol OpCode deleteContainer (20). The deleteContainer request path completely skips both the session check and the DELETE ACL check that are enforced by the regular delete (OpCode 2) path. This is an authorization bypass / ACL enforcement bug. This issue affects Apache ZooKeeper: from 3.9.0 through 3.9.5, from 3.8.0 through 3.8.6. Users are recommended to upgrade to version 3.9.6 or 3.8.7, which fixes the issue.
CVE-2026-70469	High	2026-09-16	No exploit published	No public exploit	Apache NiFi 2.11.0 disabled support for gzip-encoded HTTP requests for the application REST API and rejected requests that included the standard Content-Encoding header indicating gzip encoding. The framework enforcement filter did not check multiple instances of the Content-Encoding header and did not reject non-standard identifiers for gzip encoding, allowing a malicious client to send crafted requests that could consume excessive amounts of memory. Upgrading to Apache NiFi 2.12.0 is the recommended mitigation, which disables decompression of gzip-encoded HTTP requests regardless of header number or encoding identifiers.
CVE-2026-59969	High	2026-09-16	No exploit published	No public exploit	Apache ZooKeeper quorum TLS fails to enforce peer hostname verification in FIPS-mode deployments. When sslQuorum=true, zookeeper.fips-mode=true, ssl.quorum.hostnameVerification=true, and ssl.quorum.clientHostnameVerification=true are enabled, the Java SSLSocket quorum path accepts a CA-trusted peer certificate whose SAN does not match the connected host. A malicious or misissued peer certificate can therefore join quorum traffic, participate in leader election, and enter replication flows. Users are recommended to upgrade to version 3.8.7 or 3.9.6, which fixes the issue.
CVE-2026-59739	High	2026-09-16	No exploit published	No public exploit	Information disclosure via SetWatches reconnect replay in Apache ZooKeeper due to missing ACL check. An attacker can discover ACL-restricted paths by registering exists-watches on non-existent paths, then reconnecting after the paths are created with restricted ACLs. Issue is caused by incomplete fix for CVE-2024-23944 (ZOOKEEPER-4799). The fix added ACL checking to WatchManager.triggerWatch(). However, DataTree.setWatches() — the SetWatches/SetWatches2 reconnect replay handler — still calls watcher.process(event) with null ACL, bypassing the check entirely. It's important to note that only the path is exposed by this vulnerability, not the data of znode, but since znode path can contain sensitive information like user name or login ID, this issue is potentially critical. Users are recommended to upgrade to version 3.9.6, 3.8.7 which fixes the issue.
CVE-2026-67211	High	2026-09-11	Protected by Waratek	No public exploit	OOM Denial of Service via Unbounded Map Pre-Sizing in Apache OpenNLP SymSpellModelSerializer Versions Affected: - 3.0.0-M4 - 3.0.0-M5 (The opennlp-spellcheck extension was introduced in 3.0.0-M4. Releases 1.x and 2.x do not contain the affected code.) Description: The SymSpellModelSerializer.create() method reads two 32-bit signed integer count fields (unigramCount and bigramCount) from a binary SymSpell model stream and passes each value directly to LinkedHashMap.newLinkedHashMap() after validating only that it is non-negative. No upper bound is applied, so the count is fully attacker-controlled when the model file originates from an untrusted source. A crafted .bin model file in which either count field is set to Integer.MAX_VALUE (or any value large enough to exhaust the available heap) causes the map to be pre-sized to a capacity of 2^30 entries. The oversized backing array is allocated on the first put() into that map, requesting 4–8 GB depending on whether compressed oops are in effect, and the load fails with an OutOfMemoryError. Because the count fields sit immediately after a fixed-size header (magic, format version, three UTF strings, the configuration fields, and the edit-distance identifier) the attacker pays no meaningful size cost to weaponize a payload: a file of well under 100 bytes plus a single real entry is sufficient to crash a JVM that loads it. Any code path that deserializes a SymSpell model is affected, including SymSpellModels.deserialize(InputStream), SymSpellModels.fromBytes(byte[]), classpath model loading via SymSpellModelResolver.resolveByLanguage(String), the CorrectTextTool command-line tool, and model-archive loading through the registered ArtifactSerializer. The opennlp-spellcheck extension ships in the official OpenNLP binary distribution. The practical impact is denial of service against processes that load SymSpell model files from untrusted or semi-trusted origins. Mitigation: - 3.x users should upgrade to 3.0.0-M6. Note: The fix applies an upper bound to both count fields, checked before the map is pre-sized; counts that are negative or exceed the bound cause an IOException to be thrown and the read to fail fast with no large allocation. The bound is the existing AbstractModelReader.MAX_ENTRIES limit introduced earlie, which the current change promotes to public visibility so that serializers implementing their own binary format can share it. The default bound is 10,000,000, which is well above the entry counts of legitimate SymSpell dictionaries but far below any value that would threaten heap exhaustion. Deployments that legitimately need to load larger dictionaries can raise the limit at JVM startup by setting the OPENNLP_MAX_ENTRIES system property to the desired positive integer (e.g. -DOPENNLP_MAX_ENTRIES=50000000); invalid or non-positive values fall back to the default. Note that this property is shared with the model-reader limit and raising it relaxes both. Users who cannot upgrade immediately should treat all SymSpell .bin model files as untrusted input unless their provenance is verified, and should avoid loading models supplied by end users or fetched from third-party repositories without integrity checks.
CVE-2026-80354	High	2026-09-10	No exploit published	No public exploit	Authorization bypass through User-Controlled key vulnerability in Apache Camel K. An authorization vulnerability in custom resource resolution allows a tenant to reference secrets by name in the operator namespace, potentially exposing secrets belonging to other tenants or operator components. This issue affects Apache Camel K: from 2.0.0 before 2.9.3, from 2.10.1 before 2.10.2. Users are recommended to upgrade to version 2.9.3, 2.10.2 or 2.11.0, which fixes the issue.
CVE-2026-49363	High	2026-09-10	No exploit published	No public exploit	An unauthenticated remote attacker connecting with the CORE protocol can discover cluster node details by sending a SUBSCRIBE_TOPOLOGY request prior to authentication. This issue affects Apache Artemis: from 2.50.0 through 2.56.0; Apache ActiveMQ Artemis: from 1.0.0 through 2.44.0. Users are recommended to upgrade to version 2.57.0, which fixes the issue.
CVE-2026-49362	High	2026-09-10	No exploit published	No public exploit	An unauthenticated remote attacker can create arbitrary durable queues via the CORE protocol, leading to unauthorized broker state manipulation and potential denial of service. This issue affects Apache Artemis: from 2.50.0 through 2.56.0; Apache ActiveMQ Artemis: from 1.0.0 through 2.44.0. Users are recommended to upgrade to version 2.57.0, which fixes the issue.
CVE-2026-74761	High	2026-09-09	No exploit published	No public exploit	Improper input validation in TopicRegion in Apache ActiveMQ, Apache ActiveMQ Broker, and Apache ActiveMQ All on all platforms. An authenticated client can spoof clientId when removing a durable topic subscription. This issue affects Apache ActiveMQ Broker: before 5.19.11, from 6.0.0 before 6.3.2; Apache ActiveMQ All: before 5.19.11, from 6.0.0 before 6.3.2; Apache ActiveMQ: before 5.19.11, from 6.0.0 before 6.3.2. Users are recommended to upgrade to version 6.3.2 or 5.19.11 which fixes the issue.
CVE-2026-73334	High	2026-09-09	No exploit published	No public exploit	Potential problem for users of the org.apache.parquet.crypto.keytools package in Apache Parquet, versions 1.12 to 1.18. This package enables users to encrypt Parquet files via an envelope encryption mechanism that wraps (encrypts) data keys via a Key Management Service (KMS). On the reader side, the KMS URL can be application-controlled or file-controlled. If the user does not leverage application control for this parameter, a file-controlled KMS URL is forwarded to a pluggable KmsClient implementation. If the pluggable implementation does not perform host validation, a KMS token can be sent to a malicious host set by an attacker in the file. Before the problem is fixed, users are recommended to leverage application control for KMS URL parameter in readers (versions 1.12-1.18). After the problem is fixed (presumably in version 1.19), the upgrade will disable file-controlled KMS URL by default. Users of the KMS URL parameter will have two options then: leverage application control for KMS URL parameter in readers, or enable file-controlled KMS URL (via a new app parameter). The latter option will explicitly require (in the new parameter documentation) to validate the KMS URL and use authentication in the custom implementation of the KMS client plug in.
CVE-2026-78254	High	2026-09-07	No exploit published	No public exploit	The ftp and scp tasks of Apache Ant can download files from a remote server. A malicious server can provide relative paths that allow it to write outside of the dedicated target directory for the download, making it possible to overwrite files of the attacker's choice using the permissions of the user running Ant in versions prior to Ant 1.10.18. In order to exploit this vulnerability, the server would either have to be malicious or be subject to a machine-in-the-middle attack. Additionally in the case of scp or the ftp task using ftps the server must pass the server identity checks performed by the tasks. For ftp tasks not using ftps a malicious server could act as a machine-in-the-middle to provide malicious files. Starting with Ant 1.10.18 both tasks will prevent writing outside of the destination directory by default. An option is available to disable this behavior in the unlikely case that the old behavior is required by existing build files. Mitigations: Users of scp and ftp (when using ftps) in any version of Ant should not bypass server identity checks. Users of ftp not using ftps should switch to ftps where possible. All users are recommended to upgrade to Apache Ant 1.10.18, which fixes this issue.
CVE-2026-71257	High	2026-08-31	No exploit published	No public exploit	Apache Wicket enforces the upload limits configured on a form or upload field while parsing a multipart request with Apache Commons FileUpload. If the request body has already been consumed by another component, Commons FileUpload returns no items and Wicket falls back to reading the upload through HttpServletRequest#getParts(). The per-file size limit (for example Form#setFileMaxSize) and the file count limit (Form#setFileCountMax) are not applied to the parts obtained that way, and no exception is raised, so the upload is processed as though those limits had been satisfied. A remote uploader can therefore submit files that are larger, or more numerous, than the application permits, up to whatever the component that parsed the request allows. A part carrying no Content-Type header is additionally read into memory in full during parsing, so the size of that allocation is determined by the request and bounded only by those same external limits. The total upload size limit (Form#setMaxSize) is not affected. Commons FileUpload compares the declared Content-Length against it before reading the body, so a request declaring an oversized length is rejected before the fallback is reached. The fallback is reached in deployments where a servlet or filter has already parsed the request body — for example a servlet annotated with @MultipartConfig, Spring Boot's multipart resolver, or any filter that calls HttpServletRequest#getParameter() on a multipart request. It applies to the Wicket components that accept uploads on that path, including Form with FileUploadField, FileUploadToResourceField and AjaxFileDropBehavior. Applications that configure neither a per-file nor a file-count limit are not affected, as Wicket applies neither by default. This issue affects Apache Wicket: from 8.0.0 through 8.18.0, from 9.0.0 through 9.23.0, from 10.0.0 through 10.10.0. Users are recommended to upgrade to version 8.19.0, 9.24.0 or 10.11.0, which fix the issue. Users of Apache Wicket 7.x or older, which are no longer supported, should upgrade to a supported version. As a workaround, configure equivalent limits in the component that parses the request — for example spring.servlet.multipart.max-file-size and max-request-size, or maxFileSize and maxRequestSize in @MultipartConfig or in the web.xml <multipart-config> element.
CVE-2026-68763	High	2026-08-25	No exploit published	No public exploit	Uncontrolled Resource Consumption vulnerability in Apache Tomcat via an allocation leak in the HTTP/2 backlog tracking when a stream is reset This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.24, from 10.1.0-M1 through 10.1.57, from 9.0.39 through 9.0.120. The following versions were EOL at the time the CVE was created but are known to be affected: from 8.5.59 through 8.5.100. Other unsupported versions may also be affected. Users are recommended to upgrade to version 11.0.25, 10.1.58 or 9.0.121, which fix the issue.
CVE-2026-68569	High	2026-08-25	No exploit published	No public exploit	Improper Authentication vulnerability in Apache Tomcat meant that in some circumstances (e.g. CLIENT-CERT, SPNEGO) that a user would be authenticated even if the user did not exist in the DataSourceRealm. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.24, from 10.1.0-M1 through 10.1.57, from 9.0.0.M1 through 9.0.120. The following versions were EOL at the time the CVE was created but are known to be affected: from 8.5.0 through 8.5.100, from 7.0.0 through 7.0.109. Other unsupported versions may also be affected. Users are recommended to upgrade to version 11.0.25, 10.1.58 or 9.0.121, which fix the issue.
CVE-2026-66422	High	2026-08-25	No exploit published	No public exploit	Improper Authorization vulnerability in Apache Tomcat cause by security-role-ref definitions being incorrectly used as role aliases within the Realm in additional to the correct usage with Request.isUserInRole(). This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.24, from 10.1.0-M1 through 10.1.57, from 9.0.25 through 9.0.120. The following versions were EOL at the time the CVE was created but are known to be affected: from 8.5.46 through 8.5.100, from 7.0.97 through 7.0.109. Other unsupported versions may also be affected. Users are recommended to upgrade to version 11.0.25, 10.1.58 or 9.0.121, which fix the issue.
CVE-2026-65927	High	2026-08-25	No exploit published	No public exploit	Off-by-one Error vulnerability in Apache Tomcat impacting the [N] flag on the rewrite valves causes rewrite processing to restart at the second rule rather than the first rule. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.24, from 10.1.0-M1 through 10.1.57, from 9.0.0.M1 through 9.0.120. The following versions were EOL at the time the CVE was created but are known to be affected: from 8.5.0 through 8.5.100. Other unsupported versions may also be affected. Users are recommended to upgrade to version 11.0.25, 10.1.58 or 9.0.121 which fix the issue.
CVE-2026-65183	High	2026-08-25	No exploit published	No public exploit	Time-of-check Time-of-use (TOCTOU) Race Condition vulnerability in Apache Tomcat when creating unix domain sockets allows an unauthorised local user to access the unix domain socket. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.24, from 10.1.0-M1 through 10.1.57, from 9.0.42 through 9.0.120. Users are recommended to upgrade to version 11.0.25, 10.1.58, 9.0.121, which fixes the issue.
CVE-2026-53561	High	2026-08-25	No exploit published	No public exploit	An improper authentication vulnerability in HiveServer2 SAML bearer-token validation in Apache Hive 4.0.0 through 4.2.0 (and later unreleased branches) on deployments using HTTP transport with hive.server2.authentication=SAML allows an unauthenticated network attacker to authenticate as an arbitrary Hive user and obtain an authenticated HiveServer2 session via a forged Authorization: Bearer token sent to the /cliservice HTTP endpoint. Users are recommended to upgrade to 4.2.1 version that includes the fix for this issue. Access / authorization required: No Hive credentials, SAML IdP login, or knowledge of the server signing secret is required. The attacker only needs network reachability to the HiveServer2 HTTP port (typically /cliservice), directly or through a reverse proxy such as Apache Knox that forwards unauthenticated requests to HS2. The instance must have SAML authentication enabled in HTTP mode. Deployments where Knox handles SSO and HiveServer2 uses LDAP/Kerberos (not native SAML mode) are not affected by this specific issue.
CVE-2026-49050	High	2026-08-25	No exploit published	No public exploit	General user can mint admin access tokens via /access-tokens This issue affects Apache DolphinScheduler: before 3.4.2. Users are recommended to upgrade to version 3.4.2, which fixes the issue.
CVE-2026-66908	High	2026-08-24	No exploit published	No public exploit	Improper Authentication vulnerability in Apache Camel Platform HTTP Main component. This issue affects Apache Camel: from 4.8.0 before 4.22.0. The camel-main embedded HTTP server can protect its endpoints with JWT authentication, configured through authenticationEnabled together with the JWT keystore properties. JWTAuthenticationConfigurer.buildJwtOptions returned null when neither jwtIssuer nor jwtAudience was configured, and the caller then skipped the JWTAuthOptions.setJWTOptions call entirely, so the Vert.x JWTAuth instance was built from the keystore alone. The result was that inbound tokens were checked only for signature and expiry: the iss and aud claims were not validated at all. Nothing signalled this - the server started normally and reported no warning - so a deployment configured the documented way silently enforced less than the operator believed it had enabled, and the component documentation itself presented signature and expiry checking as the default with issuer and audience as an optional extra. Both the application server and the management server were affected, because the omission was in each of the two configureAuthentication paths. Any unexpired token signed by any key the configured keystore trusts was therefore accepted, regardless of which issuer minted it or which audience it was intended for. How far that reaches depends on the trust set of the keystore: where the signing key belongs to a shared or multi-tenant identity provider, a token legitimately issued for an entirely different audience is accepted, while a keystore holding a dedicated signer narrows it to reuse of tokens minted for other services within the same trust domain. The jwtIssuer and jwtAudience options did not exist before 4.21.0, so on earlier releases there was no supported way to have these claims enforced at all. Users are recommended to upgrade to version 4.22.0, which fixes the issue. From 4.22.0 the server refuses to start when a JWT keystore is configured but neither jwtIssuer nor jwtAudience is set, naming the properties involved, and a deployment that genuinely wants signature and expiry validation only must say so explicitly with the new jwtAllowMissingIssuerAndAudience option, which defaults to false. This behaviour is fixed only on 4.22.0. The 4.14.9 and 4.18.4 releases do not change the default: they add the jwtIssuer and jwtAudience options so that operators on those maintenance lines can enforce the claims by configuration, and an installation that upgrades to 4.14.9 or 4.18.4 without also setting at least one of those two properties is still accepting any unexpired token signed by a trusted key. Users on 4.14.x or 4.18.x should therefore upgrade to 4.14.9 or 4.18.4 and then set jwtIssuer, jwtAudience, or both. Releases from 4.8.0 up to and including 4.21.x offer no way to enforce these claims and should be moved to a version that does. Independently of version, restrict the JWT keystore to the smallest possible trust set - ideally a signer dedicated to this service rather than a shared identity-provider key - and where a gateway already validates issuer and audience in front of the server, ensure it cannot be bypassed. Notes: The JIRA ticket: https://issues.apache.org/jira/browse/CAMEL-24281 refers to the various commits that resolved the issue, and has more details. The fail-closed guard could not be backported. The jwtIssuer and jwtAudience options were themselves only introduced in 4.21.0 by CAMEL-23525, so on camel-4.18.x and camel-4.14.x there was nothing an operator could set to satisfy the requirement and the guard would have broken every JWT deployment on those branches with no remedy available.
CVE-2026-66907	High	2026-08-24	Protected by Waratek	No public exploit	Relative path traversal vulnerability in Apache Camel Google Storage component. This issue affects Apache Camel: from 4.0.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0. The camel-google-storage consumer downloads Google Cloud Storage objects to the local filesystem when the downloadFileName option is set. That option is documented as a folder or a filename, and when its value contains no expression token the consumer builds the local destination by appending the object name to it: evaluateFileExpression sets the Exchange file-name header to the remote object name and evaluates downloadFileName + "/${file:name}". The ${file:name} token returns the file-name header verbatim, unlike ${file:onlyname}, which applies FileUtil.stripPath to it. The resulting string was passed directly to new File(result) and blob.downloadTo(file.toPath()) with no lexical normalization and no check that the destination stayed inside the configured directory. The object name is not route-controlled data: the consumer lists the bucket, iterates every returned blob and creates one exchange per object from blob.getBlobId().getName() verbatim, and the filter option that could restrict those names is not applied at all unless it has been explicitly set. Google Cloud Storage object names are opaque UTF-8 keys that the service stores and lists exactly as written, with no server-side canonicalization, and a forward slash is only a display convention for pseudo-directories, so a key containing parent-directory segments survives round-tripping intact. An object name containing such segments therefore resolved to a location outside the configured downloadFileName directory, letting anyone able to influence the names present in the consumed bucket cause Camel to create or overwrite a file at a location of their choosing, with the privileges of the Camel process. Depending on what the process can write to, overwriting a file outside the download directory can escalate beyond the loss of integrity of that file. The downloadFileName option is an ordinary consumer parameter and carries no security marker, so nothing signalled to users that its value was not being enforced as a containment boundary. The defect is consumer-only; the producer has no download-to-file sink. Camel's other file-download consumers - camel-file, camel-ftp, camel-smb, camel-mina-sftp, camel-azure-files and the Azure Storage download paths - already constrained their local downloads to the configured directory using a path-segment boundary check; camel-google-storage was the remaining object-store download sink not covered by that work. Users are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, set the filter option to a regular expression that accepts only simple single-segment object names, so that any name carrying a path separator or a parent-directory segment is excluded before an exchange is created; note that no filtering whatsoever is applied when the option is left unset, and that the expression is matched against the whole object name. Alternatively, give downloadFileName an explicit expression that does not carry the remote path through, for example one built on ${file:onlyname} rather than the implicit ${file:name}, keeping in mind that a downloadFileName containing an expression is treated as route-author-controlled and is not covered by the containment check added in the fix. As defence in depth, treat the object names in any externally writable bucket as untrusted input and do not derive local filesystem paths from them.
CVE-2026-73635	High	2026-08-15	No exploit published	No public exploit	Allocation of resources without limits or throttling vulnerability in Apache Struts. When no fixed locale is configured, the locale used for localized-text lookups is taken from the incoming request, allowing an unauthenticated remote client to cause the framework's internal localized-text caches to grow without bound and exhaust the Java heap, denying service to other users. Applications that configure a fixed locale are not affected. This issue affects Apache Struts: from 2.0.0 through 2.3.37, from 2.5.0 through 2.5.33, from 6.0.0 through 6.10.0, from 7.0.0 through 7.2.1. Users are recommended to upgrade to version 6.11.0 or 7.3.0, which fixes the issue.
CVE-2026-73634	High	2026-08-15	No exploit published	No public exploit	Uncontrolled resource consumption vulnerability in Apache Struts. An application that exposes an endpoint collecting Content Security Policy violation reports reads the submitted report into memory without bounding how much it will accept, so a single request can exhaust the heap and deny service to other users. Such endpoints are ordinarily reachable without authentication. The core distribution maps no such endpoint by default; applications that do not collect violation reports are not affected. This issue affects Apache Struts: from 6.0.0 through 6.10.0, from 7.0.0 through 7.2.1. Users are recommended to upgrade to version 6.11.0 or 7.3.0, which fixes the issue.
CVE-2026-73633	High	2026-08-14	No exploit published	No public exploit	Uncontrolled resource consumption vulnerability in the JSON plugin of Apache Struts. When an application is configured to populate actions from a JSON request body, the plugin reads that body into memory without bounding how much it will accept, so a single request can exhaust the heap and deny service to other users. The plugin's configurable JSON input length limit does not bound this read. The JSON plugin is an optional component; applications that do not use it, or use it without enabling JSON request-body handling, are not affected. This issue affects Apache Struts: from 2.1.8 through 2.3.37, from 2.5.0 through 2.5.33, from 6.0.0 through 6.10.0, from 7.0.0 through 7.2.1. Users are recommended to upgrade to version 6.11.0 or 7.3.0, which fixes the issue.
CVE-2026-66256	High	2026-08-13	Protected by Waratek	No public exploit	UNSUPPORTED WHEN ASSIGNED Deserialization of Untrusted Data vulnerability in Apache Shindig. This issue affects Apache Shindig: all versions. Users with access to the Shindig REST API can send specially-crafted requests to trigger arbitrary code execution on the server. As this project is retired, we do not plan to release a version that fixes this issue. Users are recommended to find an alternative or restrict access to the instance to trusted users. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.
CVE-2026-61899	High	2026-08-10	No exploit published	No public exploit	Vulnerability in tapestry-core in Apache Tapestry 5.5.0+ on all platforms allows attackers to download clsspath assets via specially crafted URLs. Users are recommended to upgrade to version 5.9.1, which fixes this issue.
CVE-2026-68481	High	2026-08-06	No exploit published	No public exploit	In Apache CXF's DefaultEncryptingOAuthDataProvider, revoked access tokens still decrypt successfully, and TokenIntrospectionService reports active:true. The same applies to refresh tokens. This violates the RFC stipulations that 'The authorization server MUST invalidate the token.' and 'introspection of a revoked token MUST return {"active":false}'. Users are recommended to upgrade to versions 4.2.3 or 4.1.8 or 3.6.12, which fix this issue.
CVE-2026-65432	High	2026-08-06	Protected by Waratek	No public exploit	Apache CXF reads a top-level WSDL through its hardened StaxUtils path, which disables XML DTDs and external entities. However, any <wsdl:import> or <xsd:import> referenced from that top-level WSDL is handed off to WSDL4J, which does not disable DOCTYPE declarations or external entities. As a result, the protections applied to the top-level document do not extend to imported documents, leaving imported WSDL/XSD content vulnerable to XML External Entity (XXE) attacks. Users are recommended to upgrade to versions 4.2.3 or 4.1.8 or 3.6.12, which fix this issue.
CVE-2026-64958	High	2026-08-06	No exploit published	No public exploit	An incomplete fix for CVE-2026-50645 means that it is still possible to perform a denial of service attack on Apache CXF by sending a message with many attachment headers. Users are recommended to upgrade to versions 4.2.3 or 4.1.8 or 3.6.12, which fix this issue.
CVE-2026-57819	High	2026-08-06	No exploit published	No public exploit	Apache CXF allows to set a limit on the number of form parameters in a JAX-RS message via the "maxFormParameterCount" configuration option. However, no default limit is set which may lead to denial of service attacks when processing requests with very large numbers of form parameters. Users are recommended to upgrade to versions 4.2.3 or 4.1.8 or 3.6.12, which fix this issue by using a default limit of 500 parameters.
CVE-2026-57818	High	2026-08-06	No exploit published	No public exploit	A race condition in JCacheCodeDataProvider allows an attacker to redeem a single authorization code multiple times via concurrent requests, resulting in the issuance of multiple distinct, valid access tokens. Users are recommended to upgrade to versions 4.2.3, 4.1.8 or 3.6.12, which fix this issue.
CVE-2026-57817	High	2026-08-06	No exploit published	No public exploit	The OpenID Connect Core 1.0 specification mandates that the RP MUST validate the `c_hash` parameter when operating in the Hybrid Flow. If an Apache CXF RP is integrated with a non-compliant or misconfigured Identity Provider (IdP) that omits the `c_hash`, the RP becomes vulnerable to Authorization Code Substitution/Injection attacks. Users are recommended to upgrade to versions 4.2.3 or 4.1.8 or 3.6.12, which fix this issue.
CVE-2026-54225	High	2026-08-06	No exploit published	No public exploit	Apache CXF allows to control the maximum attachment size via the "attachment-max-size". Prior to Apache CXF 4.2.3 and 4.1.8 and 3.6.12, there was no default placed on this size, meaning that a denial of service attack is possible if the user doesn't explicitly set the limit. Users should update to Apache CXF 4.2.3 or 4.1.8 or 3.6.12 which fixes this problem by imposing a default attachment size limit of 50mb.
CVE-2026-68074	High	2026-08-05	No exploit published	No public exploit	A pre-authentication attacker could leverage unbounded symbol value caching to cause resource exhaustion leading to denial of service. This issue affects Apache Qpid Broker-J: through 10.0.1. Users are recommended to upgrade to version 10.1.0, which fixes the issue.
CVE-2026-68073	High	2026-08-05	No exploit published	No public exploit	A pre-authentication attacker could leverage type nesting to cause a StackOverflowError potentially leading to denial of service. This issue affects Apache Qpid Broker-J: through 10.0.1. Users are recommended to upgrade to version 10.1.0, which fixes the issue.
CVE-2026-68060	High	2026-08-05	No exploit published	No public exploit	A pre-authentication attacker could leverage type size/count handling to cause excessive allocation leading to potential denial of service. This issue affects Apache Qpid Broker-J: through 10.0.1. Users are recommended to upgrade to version 10.1.0, which fixes the issue.
CVE-2026-67592	High	2026-08-05	No exploit published	No public exploit	It was not possible to govern the maximum number of transfer frames per incoming delivery, enabling an authenticated attacker to cause excessive resource usage and potential denial of service. This issue affects Apache Qpid ProtonJ2: through 1.1.0. Users are recommended to upgrade to version 1.2.0, which fixes the issue
CVE-2026-67590	High	2026-08-05	No exploit published	No public exploit	A pre-authentication attacker could leverage type nesting to cause a StackOverflowError potentially leading to denial of service. This issue affects Apache Qpid ProtonJ2: through 1.1.0. Users are recommended to upgrade to version 1.2.0, which fixes the issue.
CVE-2026-67589	High	2026-08-05	No exploit published	No public exploit	A pre-authentication attacker could leverage type size/count handling to cause excessive allocation leading to potential denial of service. This issue affects Apache Qpid ProtonJ2: through 1.1.0. Users are recommended to upgrade to version 1.2.0, which fixes the issue.
CVE-2026-67588	High	2026-08-05	No exploit published	No public exploit	A pre-authentication attacker could leverage unbounded symbol value caching to cause resource exhaustion leading to denial of service. This issue affects Apache Qpid ProtonJ2: through 1.1.0. Users are recommended to upgrade to version 1.2.0, which fixes the issue.
CVE-2026-66274	High	2026-08-05	No exploit published	No public exploit	A pre-authentication attacker could leverage type nesting to cause a StackOverflowError potentially leading to denial of service. This issue affects Apache Qpid Proton-J: through 0.34.1. Users are recommended to upgrade to version 0.35.0, which fixes the issue.
CVE-2026-66273	High	2026-08-05	No exploit published	No public exploit	A pre-authentication attacker could leverage type size/count handling to cause excessive allocation leading to potential denial of service. This issue affects Apache Qpid Proton-J: through 0.34.1. Users are recommended to upgrade to version 0.35.0, which fixes the issue.
CVE-2026-66257	High	2026-08-05	No exploit published	No public exploit	A pre-authentication attacker could leverage unbounded symbol value caching to cause resource exhaustion leading to denial of service. This issue affects Apache Qpid Proton-J: through 0.34.1. Users are recommended to upgrade to version 0.35.0, which fixes the issue.
CVE-2026-68981	High	2026-08-03	No exploit published	No public exploit	Apache NiFi 1.5.0 through 2.10.0 support gzip-encoded HTTP requests for the application REST API using a Jersey encoding filter. The framework enforced a configurable maximum request size on the compressed payload rather than the decompressed output, allowing a malicious client to send crafted requests that could consume excessive amounts of memory. Upgrading to Apache NiFi 2.11.0 is the recommended mitigation, which relocates response compression to Jetty Server and disables decompression of gzip-encoded HTTP requests.
CVE-2026-62354	High	2026-08-03	No exploit published	No public exploit	Authorization handling for Parameter Context validation requests in Apache NiFi 1.10.0 through 2.10.0 allows clients with read access to submit proposed Parameter values. The proposed values override current configuration, enabling users with read access to invoke predefined component validation methods with alternative settings. Apache NiFi installations that do not implement different levels of authorization for viewing and modifying Parameter Context configuration are not subject to this vulnerability. Upgrading to Apache NiFi 2.11.0 is the recommended mitigation, requiring write access to submit Parameter Context validation requests.
CVE-2026-62391	High	2026-07-31	Protected by Waratek	No public exploit	The security fix for CVE-2025-66518 is incomplete. Any client who can access to Apache Kyuubi Server via Kyuubi frontend protocols can bypass server-side config kyuubi.session.local.dir.allowlist via unprefixed Spark config aliases. This issue affects Apache Kyuubi: from 1.6.0 before 1.12.0. Users are recommended to upgrade to version 1.12.0, which fixes the issue.
CVE-2026-50622	High	2026-07-29	No exploit published	No public exploit	Description: Missing Authorization in Apache Atlas. A missing authorization vulnerability in Apache Atlas's admin endpoints allows any authenticated user, regardless of their assigned role, to perform administrative operations. Affect Version: This issue affects Apache Atlas: from 0.8 through 2.5.0. Mitigation: Users are recommended to upgrade to version 2.6.0, which fixes the issue.
CVE-2026-23904	High	2026-07-29	No exploit published	No public exploit	Kyuubi Engine UI proxy accepts a host and port from the request path and proxies HTTP requests to that destination. A remote requester with network access to the proxy can cause the Kyuubi server to send HTTP requests to arbitrary reachable hosts, resulting in SSRF or open-proxy behavior. This issue affects Apache Kyuubi: from 1.8.0 before 1.12.0. Users are recommended to upgrade to version 1.12.0, which disables the proxy by default. To restore proxied Engine UI, set kyuubi.frontend.rest.engine.ui.proxy.enabled=true and configure allowed target hosts with kyuubi.frontend.rest.engine.ui.proxy.hosts.
CVE-2026-66299	High	2026-07-28	No exploit published	No public exploit	Uncontrolled Resource Consumption vulnerability in Apache Tomcat's WebSocket chat example. This issue affects Apache Tomcat: from 11.0.0-M20 through 11.0.24, from 10.1.24 through 10.1.57, from 9.0.89 through 9.0.120. Users who have followed the security guidance to remove the examples web application are not affected by this issue. Users are recommended to remove the examples web application or to upgrade to version 11.0.25, 10.1.58 or 9.0.121 (when released), which fix the issue.
CVE-2026-59878	High	2026-07-28	No exploit published	No public exploit	Improper Input Validation vulnerability in Apache ActiveMQ AMQP, Apache ActiveMQ, Apache ActiveMQ All. A remote unauthenticated peer that can reach an exposed AMQP NIO connector can trigger denial-of-service behavior by sending a frame size value. This cause the NIO threads to die and if done rapidly enough can lead to exhaustion of the NIO thread pool denying service to other connections. This issue affects Apache ActiveMQ AMQP: before 5.19.9, from 6.0.0 before 6.2.8; Apache ActiveMQ: before 5.19.9, from 6.0.0 before 6.2.8; Apache ActiveMQ All: before 5.19.9, from 6.0.0 before 6.2.8. Users are recommended to upgrade to version 5.19.9, 6.2.8, or 6.3.0 which fixes the issue.
CVE-2026-48586	High	2026-07-27	No exploit published	No public exploit	Improper Handling of Highly Compressed Data (Data Amplification) vulnerability in Apache Thrift C++, Java, Python, Go, D, C/GLib bindings. This issue affects Apache Thrift: before 0.24.0. Users are recommended to upgrade to version 0.24.0, which fixes the issue.
CVE-2026-43871	High	2026-07-27	No exploit published	No public exploit	Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability in Apache Thrift Python, Go, PHP and Java bindings.This issue affects Apache Thrift: before 0.24.0. Users are recommended to upgrade to version 0.24.0, which fixes the issue.
CVE-2026-66144	High	2026-07-24	No exploit published	No public exploit	Although remote policy references are not retrieved during policy normalization, if they are manually retrieved via the API it can cause a denial of service attack if a huge policy is retrieved. Users are recommended to upgrade to version 3.2.3, which fixes this issue by imposing a default maximum size on data read from remote policy references.
CVE-2026-66143	High	2026-07-24	No exploit published	No public exploit	It is possible to bypass the maximum number of normalized policy alternatives that was introduced in Apache Neethi 3.2.2 via certain crafted policies, which may lead to a denial of service attack via resource consumption. Users are recommended to upgrade to version 3.2.3, which fixes this issue.
CVE-2026-66142	High	2026-07-24	No exploit published	No public exploit	Apache Neethi is vulnerable to uncontrolled recursion when parsing policies that lack policy Ids or with deeply nested structures, which may lead to a denial of service attack when parsing policies due to runtime memory exhaustion. Users are recommended to upgrade to version 3.2.3, which fixes this issue.
CVE-2026-62418	High	2026-07-20	No exploit published	No public exploit	Low-privileged authenticated Server-Side Request Forgery (SSRF) vulnerability in Apache Syncope via Connectors and Resources check. This issue affects Apache Syncope: from 3.0.0-M0 through 3.0.16, from 4.0.0-M0 Through 4.0.6, from 4.1.0-M0 through 4.1.1. Users are recommended to upgrade to version 4.0.7 / 4.1.2, which fix this issue.
CVE-2026-56624	High	2026-07-20	No exploit published	No public exploit	Improper certificate validation in Apache MINA SSHD (server-side). Apache MINA SSHD is a Java library for client-side and server-side SSH. Server-side OpenSSH user certificate validation during user authentication in an Apache MINA SSHD server did not check for the unsupported force-command or verify-required options that could be embedded in the certificate, nor did it validate these options. As a result it was possible that a user could authenticate with such a certificate that included a force-command option but still was able to execute other commands. What other command exactly would be available to the user depends on the implementation of the server. This issue is fixed in Apache MINA SSHD 2.19.0 and 3.0.0-M5. Applications are advised to upgrade to these versions. The fix rejects OpenSSH user certificates that include these options, since Apache MINA SSHD implements neither force-command nor sk-*-cert-v01@openssh.com user certificates (which are the only ones for which verify-required would make sense).
CVE-2026-56623	High	2026-07-20	Protected by Waratek	No public exploit	Path traversal on Windows in Apache MINA SSHD component sshd-git. Apache MINA SSHD is a Java library for client-side and server-side SSH. A git server implemented with Apache MINA SSHD component sshd-git and running on Windows could allow an authenticated remote user access to git repositories outside of the configured server-side root directory. The path validation applied for CVE-2026-48827 in Apache MINA SSHD 2.18.0 and 3.0.0-M4 was partly ineffective for Servers running on Windows. Applications are affected if they use org.apache.sshd:sshd-git to implement a git server and run on Windows. Applications not using sshd-git or not running on Windows are not affected. Users are advised to upgrade affected applications to Apache MINA SSHD 2.19.0, which fixes the issue. The issue also is present in the pre-release milestones 3.0.0-M1 to 3.0.0-M4 for a new upcoming new major version 3.0.0. Again, applications are affected only if they use sshd-git and run on Windows. Upgrade affected applications to 3.0.0-M5.
CVE-2026-56452	High	2026-07-20	Protected by Waratek	No public exploit	Path traversal in the sshd-scp component of Apache MINA SSHD. Apache MINA SSHD is a Java library for client-side and server-side SSH. The implementation of receiving files or directories via SCP did not validate filenames in SCP "C" or "D" commands. A malicious sender could send filenames containing paths, resulting in files to be written in attacker-controlled places. The issue affects only * applications that use no longer supported Apache MINA SSHD versions < 2.0.0 and use the SCP functions to receive files, * or applications using sshd-scp in Apache MINA SSHD >= 2.0.0 to receive files. Applications using Apache MINA SSHD >= 2.0.0 not using sshd-scp are not affected. The issue is fixed in Apache MINA 2.19.0 and 3.0.0-M5. Affected applications are advised to upgrade to these versions.
CVE-2026-57111	High	2026-07-09	No exploit published	No public exploit	Permissive Cross-Origin Resource Sharing (CORS) in the REST API (helix-rest, org.apache.helix.rest.server.filters.CORSFilter) in Apache Helix through 2.0.0 on all platforms allows a remote attacker controlling a web page visited by an authorized user to read responses from and issue cross-origin requests to administrative REST endpoints via a cross-origin request from an arbitrary origin, since the filter unconditionally returns Access-Control-Allow-Origin: * together with Access-Control-Allow-Credentials: true and reflects arbitrary Access-Control-Request-Method / Access-Control-Request-Headers values in preflight responses. Users are recommended to upgrade to version 2.0.1, which fixes this issue.
CVE-2026-55994	High	2026-07-06	No exploit published	No public exploit	Improper Input Validation, Exposure of Sensitive Information to an Unauthorized Actor, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel in Iggy component. The camel-iggy consumer mapped the user-headers of inbound Iggy messages into the Camel Exchange header map without applying any HeaderFilterStrategy (IggyFetchRecords copied the message user-headers straight into the Exchange). Because nothing blocked the Camel header namespace, an actor able to publish to the consumed Iggy stream/topic could set Camel-internal control headers - including CamelHttpUri (Exchange.HTTP_URI) - simply by supplying them as message user-headers. In a route where the Iggy consumer feeds a downstream HTTP producer, the injected CamelHttpUri redirects the server-side HTTP request to an attacker-chosen destination (server-side request forgery - for example to an internal service or a cloud metadata endpoint). In addition, the HTTP producer resolves Camel property placeholders on the resulting (attacker-controlled) URI, so placeholders embedded in the injected value - such as an environment-variable reference, an application property, or a vault reference - are resolved to their real values and sent to the attacker, disclosing environment variables, application properties and vault secrets. This issue affects Apache Camel: from 4.17.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix adds a dedicated IggyHeaderFilterStrategy (and a headerFilterStrategy endpoint option) that filters the Camel header namespace case-insensitively on inbound mapping, so externally-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from the inbound message before they reach any downstream producer (for example removeHeaders('Camel') and removeHeaders('camel') at the start of the route), restrict who can publish to the consumed Iggy stream/topic, and avoid bridging an untrusted consumer directly into an HTTP producer whose target URI can be driven from message headers.
CVE-2026-55993	High	2026-07-06	No exploit published	No public exploit	Improper Input Validation, Exposure of Sensitive Information to an Unauthorized Actor, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel in Atmosphere Websocket Component. The camel-atmosphere-websocket consumer mapped inbound WebSocket query parameters into the Camel Exchange header map without applying any HeaderFilterStrategy (WebsocketConsumer.sendEventNotification() iterates the query-string map collected in WebsocketConsumer.service() and copies each entry into the Exchange). Because nothing blocked the Camel header namespace, a client connecting to the WebSocket endpoint could set Camel-internal control headers - including CamelHttpUri (Exchange.HTTP_URI) - simply by supplying them as query parameters. In a route where the WebSocket consumer feeds a downstream HTTP producer, the injected CamelHttpUri redirects the server-side HTTP request to an attacker-chosen destination (server-side request forgery - for example to an internal service or a cloud metadata endpoint). In addition, the HTTP producer resolves Camel property placeholders on the resulting (attacker-controlled) URI, so placeholders embedded in the injected value - such as an environment-variable reference, an application property, or a vault reference - are resolved to their real values and sent to the attacker, disclosing environment variables, application properties and vault secrets. When the WebSocket endpoint is exposed without authentication, this is reachable by an unauthenticated remote attacker. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes the consumer apply the HeaderFilterStrategy it already inherits from the HTTP/servlet stack, filtering the Camel header namespace case-insensitively on inbound mapping, so externally-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from the inbound message before they reach any downstream producer (for example removeHeaders('Camel') and removeHeaders('camel') at the start of the route), require authentication on the WebSocket endpoint, and avoid bridging an untrusted consumer directly into an HTTP producer whose target URI can be driven from message headers.
CVE-2026-49042	High	2026-07-06	No exploit published	No public exploit	Improper Input Validation vulnerability in Apache Camel. This issue affects Apache Camel: from 4.8.0 through 4.18.2, from 4.19.0 through 4.20.0. Users are recommended to upgrade to version 4.18.3, 4.21.0, which fixes the issue.
CVE-2026-46726	High	2026-07-06	No exploit published	No public exploit	Improper Input Validation, Exposure of Sensitive Information to an Unauthorized Actor, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel in Vertx Websocket component. The camel-vertx-websocket consumer mapped inbound WebSocket query and path parameters into the Camel Exchange header map without applying any HeaderFilterStrategy (VertxWebsocketConsumer.populateExchangeHeaders()). Because nothing blocked the Camel header namespace, a client connecting to the WebSocket endpoint could set Camel-internal control headers - including CamelHttpUri (Exchange.HTTP_URI) - simply by supplying them as query parameters. In a route where the WebSocket consumer feeds a downstream HTTP producer, the injected CamelHttpUri redirects the server-side HTTP request to an attacker-chosen destination (server-side request forgery - for example to an internal service or a cloud metadata endpoint). In addition, the HTTP producer resolves Camel property placeholders on the resulting (attacker-controlled) URI, so placeholders embedded in the injected value - such as an environment-variable reference, an application property, or a vault reference - are resolved to their real values and sent to the attacker, disclosing environment variables, application properties and vault secrets. When the WebSocket endpoint is exposed without authentication, this is reachable by an unauthenticated remote attacker. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes the affected consumers apply a HeaderFilterStrategy that filters the Camel header namespace case-insensitively on inbound mapping, so externally-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from the inbound message before they reach any downstream producer (for example removeHeaders('Camel') and removeHeaders('camel') at the start of the route), require authentication on the WebSocket endpoint, and avoid bridging an untrusted consumer directly into an HTTP producer whose target URI can be driven from message headers.
CVE-2026-46592	High	2026-07-06	No exploit published	No public exploit	Improper Input Validation, Unintended Proxy or Intermediary ('Confused Deputy') vulnerability in Apache Camel CXF SOAP component. The camel-cxf producer selects which SOAP operation to invoke on the backend service from the operationName (and operationNamespace) Exchange header, whose constant values (CxfConstants.OPERATION_NAME / OPERATION_NAMESPACE) were the plain strings operationName / operationNamespace. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a cxf: producer, any HTTP client could therefore set the operationName header and have CxfProducer resolve and invoke a different WSDL operation than the route intended - for example replacing a read operation with a destructive one - against the backend SOAP service (a confused-deputy redirection). The constant is defined in the shared camel-cxf-common module, so the same non-prefixed names also applied to camel-cxfrs. No credentials are required when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, the operation-selection headers are named CamelCxfOperationName / CamelCxfOperationNamespace and are filtered at transport boundaries; see the 4.21 upgrade guide for the cross-transport carrier-header pattern. For deployments that cannot upgrade immediately, do not select the CXF operation from untrusted input: strip the operationName and operationNamespace headers from any untrusted ingress before the cxf: producer and set the operation from a trusted source in the route.
CVE-2026-46591	High	2026-07-06	No exploit published	No public exploit	Improper Neutralization of Special Elements in Data Query Logic vulnerability in Apache Camel Neo4J component. The camel-neo4j producer builds the Cypher WHERE clause for its match/retrieve and delete operations from the CamelNeo4jMatchProperties map. CVE-2025-66169 addressed Cypher injection through the property values by binding them as query parameters ($paramN), but the property names (the JSON keys of that map) were still concatenated into the query string verbatim in Neo4jProducer.retrieveNodes() and deleteNode(). A property name containing Cypher syntax therefore alters the structure of the executed query. Where a route maps untrusted input into the CamelNeo4jMatchProperties map - for example by passing a request body as the match map, or from a consumer that does not filter inbound Camel* headers - an attacker who controls the JSON key names can inject arbitrary Cypher and read, modify or delete any node or relationship in the Neo4j database. The CamelNeo4jMatchProperties header is itself Camel-prefixed and is filtered by the HTTP header-filter strategy, so a plain HTTP client cannot set it directly; the issue is reachable through routes that deliberately or inadvertently carry untrusted data into that header. This issue affects Apache Camel: from 4.10.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, do not populate the CamelNeo4jMatchProperties map from untrusted input: validate or allow-list the property names (for example against ^[A-Za-z_][A-Za-z0-9_]$) before the Neo4j producer, and ensure that any consumer feeding such a route filters inbound Camel / camel* headers so the match header cannot be supplied by an external sender.
CVE-2026-46590	High	2026-07-06	Protected by Waratek	No public exploit	Deserialization of Untrusted Data vulnerability in Apache Camel PQC component. The camel-pqc component persists post-quantum key metadata (KeyMetadata) through pluggable KeyLifecycleManager implementations. HashicorpVaultKeyLifecycleManager and AwsSecretsManagerKeyLifecycleManager read that metadata back from the configured secret backend by deserializing a Base64-wrapped value with a raw java.io.ObjectInputStream.readObject() and no ObjectInputFilter or class allow-list; the cast to KeyMetadata happens only after readObject() returns, so any readObject() side effects in a crafted object run before the type check. The same unfiltered legacy-migration read also remained in FileBasedKeyLifecycleManager (for the stored KeyPair and KeyMetadata). A principal who can write to the operator-controlled backend that holds these values - the HashiCorp Vault KV path, or the AWS Secrets Manager secret (requiring a Vault token or secretsmanager:PutSecretValue) - could store a crafted serialized object that is deserialized during normal key-lifecycle operations, potentially leading to code execution in the context of the application that manages the keys. This is an incomplete-remediation follow-on to CVE-2026-40048 (CAMEL-23200), which changed FileBasedKeyLifecycleManager to store metadata as JSON / PKCS#8 / X.509 but did not add an ObjectInputFilter, did not cover the Vault and AWS sibling managers, and left FileBasedKeyLifecycleManager's own legacy-migration deserialization unfiltered. This issue affects Apache Camel: from 4.18.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.18.x LTS releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, restrict write access to the key backend so that only the application's own identity can write the camel-pqc secrets (least-privilege HashiCorp Vault policies and secretsmanager:PutSecretValue IAM), and keep the PQC key material in a backend separate from any data that less-trusted principals can write.
CVE-2026-46588	High	2026-07-06	No exploit published	No public exploit	Improper Input Validation vulnerability in Apache Camel. This issue affects Apache Camel: through 4.14.7, from 4.15.0 through 4.18.2, from 4.19.0 through 4.20.0. Users are recommended to upgrade to version 4.14.8, 4.18.3, 4.21.0, which fixes the issue.
CVE-2026-46587	High	2026-07-06	No exploit published	No public exploit	Improper Input Validation vulnerability in Apache Camel. This issue affects Apache Camel: through 4.14.7, from 4.15.0 through 4.18.2, from 4.19.0 through 4.20.0. Users are recommended to upgrade to version 4.14.8, 4.18.3, 4.21.0, which fixes the issue.
CVE-2026-46585	High	2026-07-06	No exploit published	No public exploit	Improper Input Validation, Authorization Bypass Through User-Controlled Key vulnerability in Apache Camel Lucene Component. The camel-lucene producer reads the search phrase from an Exchange header (LuceneConstants.HEADER_QUERY) whose value was the plain string QUERY (and RETURN_LUCENE_DOCS for HEADER_RETURN_LUCENE_DOCS). Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that exposes a Lucene query operation behind an HTTP consumer (for example platform-http), any HTTP client could therefore set the QUERY header and have its value executed against the full-text index, overriding the query the route intended to run. Depending on what is indexed, this allows reading documents the request should not have access to (for example a match-all query returns the entire index, or the route's intended per-user filter can be replaced), and expensive regular-expression queries can consume significant CPU. No credentials are required when the HTTP consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set the query via the raw header name must use CamelLuceneQuery (and CamelLuceneReturnLuceneDocs) instead of QUERY / RETURN_LUCENE_DOCS. For deployments that cannot upgrade immediately, strip the attacker-controllable headers before the Lucene producer and set the query from a trusted source (for example removeHeader('QUERY') and removeHeader('RETURN_LUCENE_DOCS'), then setHeader('QUERY', constant(...)) at the start of the route).

CVE

Severity

Published▾

Status

Exploitation

Description

CVE-2026-88900

High

2026-10-19

Protected by Waratek

No public exploit

Deserialization of Untrusted Data vulnerability in Apache Camel Camel-Jgroups component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. JGroupsEndpoint.createExchange(Message), which CamelJGroupsReceiver calls for every message the jgroups consumer receives before the exchange is routed, set the exchange body from org.jgroups.Message.getObject(). For an ObjectMessage, which is the message type the Camel jgroups producer sends, JGroups Java-deserializes the payload through an ObjectInputStream on its own receive thread as the message arrives, and getObject() returns the resulting object. No java.io.ObjectInputFilter was applied on that path unless the deployment had set a JVM-wide serialization filter: camel-jgroups installed none, and the JGroups versions shipped with the affected releases apply none of their own, so any serializable class on the application classpath could be instantiated and its deserialization callbacks run. Unless a channel or the channelProperties option is configured, the consumer creates its channel with new JChannel(), the stock JGroups protocol stack, which multicasts over UDP without the AUTH protocol and without encryption, so any host able to reach the cluster's multicast group or bind port can join the cluster and send messages to the consumer without credentials. Such a host could send a crafted serialized object that leads to remote code execution in the Camel process when a usable deserialization gadget chain is present on the classpath, and no non-default option was required on the consumer. Because JGroups materializes the object before Camel's receiver runs, a check performed by Camel can only inspect the deserialized result and cannot stop code that runs during deserialization, so closing the issue also requires a control that applies before the payload is read, as described in the mitigation. Exploitation requires network access to the cluster's multicast group or bind port, which with the default UDP multicast transport means a host on an adjacent network, and a usable gadget chain on the classpath, which is why the severity is assessed as high rather than critical. Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.1. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.14.x releases stream and earlier, and the 4.15.x to 4.17.x and 4.19.x to 4.21.x release lines, reached end of life before this issue was resolved and will not receive a fix, so deployments on those lines must move to a supported release.

CVE-2026-85251

High

2026-10-19

No exploit published

No public exploit

Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache Camel HTTP component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. Two paths handed credentials to a redirect target, which is a host chosen by the remote server rather than by the route, once followRedirects=true. OAuth2ClientConfigurer registers its interceptor with addRequestInterceptorFirst, and HttpClient runs protocol-level request interceptors inside ProtocolExec, which sits below RedirectExec in the exec chain; the interceptor therefore ran again for every redirect hop and re-attached Authorization: Bearer to whatever host the Location header named. Separately, credentials were registered against an AuthScope matching any host, so basic and digest credentials were presented to a redirect target as well. A remote endpoint - or anyone who can influence its responses - could therefore collect the bearer token or the configured credentials simply by answering with a redirect to a host it controls. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. Credentials are now sent only to the authority the endpoint was configured with, and are not re-attached when a redirect crosses to another host. For deployments that cannot upgrade immediately, set followRedirects=false on endpoints that carry credentials, and handle any redirect explicitly in the route so that the destination is chosen by the route rather than by the remote server.

CVE-2026-85250

High

2026-10-19

Protected by Waratek

No public exploit

Improper Restriction of XML External Entity Reference vulnerability in Apache Camel XPath component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. With documentType set to InputSource, XPathBuilder handed the payload straight to javax.xml.xpath, which builds a DocumentBuilder of its own using the JDK defaults. The hardening applied to Camel's default document type was therefore bypassed: a DOCTYPE declaration that is refused on the default type was accepted here, and the external entity it declared was resolved and expanded into the evaluated document. An external sender whose XML reaches such an expression could read files readable by the Camel process and cause the process to issue requests to hosts it names. The two document types disagreeing on parser configuration is what made this reachable, since a deployment choosing InputSource for streaming reasons had no indication it was also choosing a weaker parser. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The InputSource document type now goes through the same hardened parser as the default type, so a DOCTYPE is refused. Note that it also shares that type's documented escape hatch: the same DocumentBuilderFactory system properties that relax the default type relax this one, so a deployment that has set them remains unprotected by design. For deployments that cannot upgrade immediately, do not use documentType=InputSource on expressions evaluated over untrusted XML; the default document type already refuses a DOCTYPE.

CVE-2026-80344

High

2026-10-19

No exploit published

No public exploit

Server-Side Request Forgery (SSRF) vulnerability in Apache Camel AS2 component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. In the AS2 protocol the sender of a message may request that the Message Disposition Notification be returned asynchronously to an address the sender supplies. camel-as2 took that address from the inbound message and used it as the destination for the outgoing receipt without constraining it to anything the deployment had configured. A remote partner therefore chose the host the Camel instance would connect to when delivering the MDN. That gives server-side request forgery from the position of the AS2 receiver, including reaching hosts that are only routable from inside the deployment's network, and where the outbound connection carries credentials configured for MDN delivery those credentials are presented to the attacker-chosen destination. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The asynchronous MDN destination is now constrained rather than taken verbatim from the inbound message. For deployments that cannot upgrade immediately, restrict outbound connectivity from the AS2 receiver to the partner endpoints it legitimately delivers receipts to, and do not attach credentials to MDN delivery that are valid for any host other than those partners.

CVE-2026-80343

High

2026-10-19

No exploit published

No public exploit

Improper Handling of Case Sensitivity vulnerability in Apache Camel Netty HTTP component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. The camel-netty-http security constraint compared the request path against the configured context path using a case-sensitive match, while the routing that dispatches the request to the endpoint did not apply the same rule. The two comparisons therefore disagreed for any path whose case differed from the configured value. An external caller could alter the case of a character in a path segment so that the security constraint no longer recognised the path as protected, while the request still dispatched to the same endpoint. The result is that the constraint is skipped and the protected route is reached without satisfying it. No credential, prior access or special configuration is required beyond being able to send a request to the consumer. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The constraint now matches the request path with the same case rules the dispatch uses, so the two can no longer disagree. For deployments that cannot upgrade immediately, place the authorization decision in front of the Camel consumer, for example in a reverse proxy that normalises the request path before forwarding.

CVE-2026-97791

High

2026-10-09

No exploit published

No public exploit

In Apache CXF, STSTokenValidator checks whether a SAML assertion is signed by a trusted certificate before deciding to send it to the STS. That result was stored in one object shared by all requests, so one request could read another's result. A remote, unauthenticated attacker could send a forged assertion signed with an untrusted certificate while legitimate requests were being processed, and it could be accepted as trusted without ever reaching the STS. Only services that use STSTokenValidator to validate SAML tokens without alwaysValidateToSts set are affected. Users are recommended to upgrade to versions 4.2.4 or 4.1.9 or 3.6.13, which fix this issue.

CVE-2026-86463

High

2026-10-09

No exploit published

No public exploit

Apache CXF's FIQL query parser has a vulnerability in how it searches for operators in query expressions. The search pattern can get stuck trying many combinations when it encounters a long string without an operator, causing the parser to consume excessive CPU time. An attacker can send a crafted query to make the server use up CPU resources, potentially slowing down or stopping other requests. The fix was to limit FIQL expressions to 4 KiB by default, preventing attackers from sending extremely long inputs while still allowing normal queries. Users are recommended to upgrade to versions 4.2.4 or 4.1.9 or 3.6.13, which fix this issue.

CVE-2026-78384

High

2026-10-09

No exploit published

No public exploit

CompressionUtils.inflate() decompressed attacker-controlled DEFLATE data with no output-size cap. A small (~KB) crafted payload could expand to gigabytes on the heap. Reachable via JWE decryption when zip=DEF (e.g. JoseSessionTokenProvider with RSA-OAEP key wrap) and via SAML redirect/POST binding token inflation — in both cases decompression happens before/independent of trust validation. Fix: Added a configurable maximum inflated-size cap (default 10 MiB, org.apache.cxf.compression-max-inflated-size system property) to CompressionUtils.inflate(); aborts with DataFormatException once exceeded. Users are recommended to upgrade to versions 4.2.4 or 4.1.9 or 3.6.13, which fix this issue.

CVE-2026-73179

High

2026-10-09

No exploit published

No public exploit

Improper enforcement of single-use authorization code semantics in the JPA OAuth2 authorization code grant provider in Apache CXFallows a remote attacker to obtain multiple valid access tokens from a single authorization code via concurrent token exchange requests that race the non-atomic find-then-delete operation against a shared relational database under READ_COMMITTED isolation. Users are recommended to upgrade to versions 4.2.4 or 4.1.9 or 3.6.13, which fixes this issue.

CVE-2026-108039

High

2026-10-09

No exploit published

No public exploit

By default, StaxUtils placed no limit on the total number of elements or the total number of characters in an XML document. A very large request could therefore use a lot of memory and CPU during parsing, especially where CXF builds a DOM from the input (for example SAAJ or WS-Security), and could cause a denial of service when no request size limit was configured. Both limits now have defaults: the maximum element count is 100 × maxChildElements (5,000,000 by default), and the maximum document size is 256M characters. Applications that process larger documents can raise the limits with the org.apache.cxf.stax.maxElementCount and org.apache.cxf.stax.maxXMLCharacters properties. Users are recommended to upgrade to versions 4.2.4 or 4.1.9 or 3.6.13, which fix this issue.

CVE-2026-107937

High

2026-10-09

No exploit published

No public exploit

In Apache CXF, the parser for multipart/MTOM attachment part headers did not fully enforce the configured attachment-max-header-size (default 300 characters) and attachment-headers-max-count (default 500) limits. The size limit was applied only to each physical line, not to a header value built from continuation lines or to the combined values of a repeated header. The count limit was checked against the number of distinct header names, not the total number of header lines. A remote, unauthenticated attacker could send a multipart request with very large folded or repeated part headers. The server would then allocate memory without bound, causing a denial of service. Users are recommended to upgrade to versions 4.2.4 or 4.1.9 or 3.6.13, which fix this issue.

CVE-2026-100227

High

2026-10-09

No exploit published

No public exploit

Improper Verification of Cryptographic Signature vulnerability in Apache CXF's JAX-RS XML Security module. The JAX-RS XML Signature interceptors (XmlSigInHandler, XmlSigInInterceptor and the streaming XmlSecInInterceptor) did not ensure that the XML passed to the application was covered by the signature. An attacker with any document signed by a trusted key could wrap it in unsigned content, which the application would then treat as signed. Users are recommended to upgrade to versions 4.2.4 or 4.1.9 or 3.6.13, which fix this issue.

CVE-2026-104714

High

2026-10-05

No exploit published

No public exploit

Concurrent execution using shared resource with improper synchronization ('race condition') vulnerability in Apache Struts. Where a localized message formats a date or time argument, the formatter retained for that message by the application-wide text provider is used by concurrently served requests without isolation, so a value belonging to one user can appear in another user's response, or the rendering can fail and surface as a server error. Applications whose localized messages format no date or time arguments are not affected. This issue affects Apache Struts: from 2.0.0 through 2.3.37, from 2.5.0 through 2.5.33, from 6.0.0 through 6.11.0, from 7.0.0 through 7.3.0. Users are recommended to upgrade to version 6.12.0 or 7.4.0, which fixes the issue.

CVE-2026-104712

High

2026-10-05

No exploit published

No public exploit

Asymmetric resource consumption (amplification) vulnerability in Apache Struts. When a request parameter is bound to an arbitrary-precision decimal (java.math.BigDecimal) property that is then rendered through the Struts tag library, the framework can produce a response many orders of magnitude larger than the request, allowing an unauthenticated remote attacker to exhaust server CPU and outbound network capacity with sustained low-volume traffic. Applications that do not bind request parameters to BigDecimal properties, or never render such a property through the Struts tag library, are not affected. This issue affects Apache Struts: from 2.5.14 through 2.5.33, from 6.0.0 through 6.11.0, from 7.0.0 through 7.3.0. Users are recommended to upgrade to version 6.12.0 or 7.4.0, which fixes the issue.

CVE-2026-95616

High

2026-09-30

No exploit published

No public exploit

An integer overflow in WSS4J's DER bounds check lets an oversized allocation pass validation. An unauthenticated attacker can send a SOAP message carrying an X.509 certificate whose SubjectKeyIdentifier extension declares a length of 0x7FFFFFFF; WSS4J decodes this while resolving the signature's key reference, before the message is authenticated, so an eleven-byte extension triggers a 2 GB allocation. Repeated requests exhaust server memory. Users are recommended to upgrade to versions 4.0.2 or 3.0.6 or 2.4.4, which fix this issue.

CVE-2026-92121

High

2026-09-30

No exploit published

No public exploit

In the WSS4J streaming (StAX) code, a signature reference using the WS-Security STR-Transform leaves an internal "inside signed content" flag permanently set. The WS-SecurityPolicy enforcer uses that flag to decide whether an element needs checking, so it stops evaluating SignedParts and SignedElements for the rest of the message. A policy requiring the SOAP Body to be signed is then satisfied even when the Body carries no signature, removing the protection against XML Signature Wrapping. Signature verification itself is unaffected. The DOM code is not affected. Users are recommended to upgrade to versions 4.0.2 or 3.0.6 or 2.4.4 which fix this issue.

CVE-2026-85532

High

2026-09-30

No exploit published

No public exploit

Apache WSS4J accepted attacker-controlled derived-key lengths and offsets without adequate bounds. This could permit cryptographically weak keys or excessive CPU and memory consumption when processing crafted WS-Security messages. The fixes enforce a minimum key length of 16 bytes, a maximum length of 512 bytes, and a maximum offset of 4096 bytes. Users are recommended to upgrade to versions 4.0.2 or 3.0.6 or 2.4.4, which fix this issue.

CVE-2026-102497

High

2026-09-29

No exploit published

No public exploit

The Apache XmlSchema walker (xmlschema-walker) doesn't detect cycles in type derivation, substitution groups, model groups or attribute groups. A malicious schema with such a cycle can make the walker recurse until the stack overflows, causing a denial of service. Users are recommended to upgrade to version 2.3.3, which fixes this issue.

CVE-2026-102496

High

2026-09-29

No exploit published

No public exploit

Apache XmlSchema doesn't limit how deeply schema structures can be nested when it builds its schema model, so a malicious schema can make parsing recurse until the stack overflows. This causes a denial of service. Users are recommended to upgrade to version 2.3.3, which fixes this issue.

CVE-2026-102495

High

2026-09-29

No exploit published

No public exploit

Apache XmlSchema doesn't limit how deeply schema imports and includes can be nested, so a malicious schema can make parsing recurse until the stack overflows. This causes a denial of service. Users are recommended to upgrade to version 2.3.3, which fixes this issue.

CVE-2026-91006

High

2026-09-28

Protected by Waratek

No public exploit

Apache Karaf's instance-management service (InstanceServiceImpl) builds the command line used to launch a child Karaf JVM by string concatenation, then executes it through /bin/sh (Unix) or cscript (Windows). The caller-supplied javaOpts value is spliced into that string unquoted. A javaOpts value containing shell metacharacters (;, |, `, $(...)) is interpreted by the shell instead of being passed to the JVM as an option, giving arbitrary OS command execution as the Karaf process user. Reachable via the shell commands instance:create, instance:start, instance:restart, instance:change-opts, and the equivalent InstanceMBean JMX operations (createInstance, startInstance, changeJavaOpts, cloneInstance). Mitigation * Set karaf.secured.command.compulsory.roles=admin in etc/system.properties to close the fail-open gap for all unconfigured command scopes. * Restrict which principals can reach instance:* commands and InstancesMBean via etc/users.properties role assignments. * Treat javaOpts passed to instance:create/instance:start/instance:change-opts/InstancesMBean as untrusted input only from fully-trusted operators.

CVE-2026-92608

High

2026-09-25

No exploit published

No public exploit

Improper handling of property-encoding exceptions in AMQP 1.0-to-AMQP 0-10 message conversion allows authenticated message producers to disrupt delivery to AMQP 0-10 consumers via message properties that the target encoder does not handle correctly. This issue affects Apache Qpid Broker-J: through 10.1.0. Users are recommended to upgrade to version 10.1.1, which fixes the issue.

CVE-2026-92564

High

2026-09-25

No exploit published

No public exploit

A pre-authentication attacker could leverage type nesting to cause a StackOverflowError potentially leading to denial of service. This issue affects Apache Qpid Broker-J: through 10.1.0. Users are recommended to upgrade to version 10.1.1, which fixes the issue.

CVE-2026-92560

High

2026-09-25

No exploit published

No public exploit

A pre-authentication attacker could leverage type size/count handling to cause excessive allocation leading to potential denial of service. This issue affects Apache Qpid Broker-J: through 10.1.0. Users are recommended to upgrade to version 10.1.1, which fixes the issue.

CVE-2026-92550

High

2026-09-25

No exploit published

No public exploit

CVE-2026-91866

High

2026-09-21

No exploit published

No public exploit

A specially crafted pair of WS-Policy documents can force Neethi's policy-intersection to do exponential amounts of work, pinning the CPU for a long time (denial of service). Users are recommended to upgrade to version 3.2.4, which fixes this issue.

CVE-2026-91865

High

2026-09-21

No exploit published

No public exploit

A small WS-Policy document using repeated policy references can force Neethi to re-expand the same references exponentially during normalization, consuming huge amounts of CPU and memory (denial of service). Users are recommended to upgrade to version 3.2.4, which fixes this issue.

CVE-2026-91864

High

2026-09-21

No exploit published

No public exploit

A specially crafted WS-Policy document can pack unlimited content inside a policy assertion, which Neethi copies into memory without counting it against its size limits, exhausting the heap (denial of service). Users are recommended to upgrade to version 3.2.4, which fixes this issue.

CVE-2026-91863

High

2026-09-21

No exploit published

No public exploit

A specially crafted WS-Policy document with deeply nested policy elements can bypass Neethi's nesting-depth limit and exhaust the thread stack, crashing the parser (denial of service). Users are recommended to upgrade to version 3.2.4, which fixes this issue.

CVE-2026-87976

High

2026-09-16

Protected by Waratek

No public exploit

Apache NiFi Registry 0.4.0 through 2.11.0 are subject to path manipulation when storing extension bundle content using group, artifact, and version coordinates from uploaded NAR manifests. The default file persistence provider used coordinates as filesystem path components without rejected parent-directory names, and the path-containment check compared an unnormalized resolved path. An authenticated user authorized to write and delete bundles in a bucket can upload a NAR with a crafted manifest resulting in file system operations outside of the file persistence directory. Upgrading to Apache NiFi Registry 2.12.0 is the recommended mitigation, which rejects parent-directory coordinates and requires a normalized path to remain a strict child of the storage root location.

CVE-2026-79993

High

2026-09-16

No exploit published

No public exploit

The `deleteContainer` opcode (0x14/20) is processed without verifying the caller's ACL permissions, allowing any authenticated client to delete specific znodes in the data tree regardless of the ACL restrictions on the znode or its parent. This opcode is considered internal-only and the official client doesn't have API for it, but a client that can open a plain TCP session on the ZooKeeper client port (2181 by default) - with NO authentication and NO ACL permissions - can delete any empty persistent znode (including regular persistent nodes, container nodes, and TTL nodes) by issuing the raw protocol OpCode deleteContainer (20). The deleteContainer request path completely skips both the session check and the DELETE ACL check that are enforced by the regular delete (OpCode 2) path. This is an authorization bypass / ACL enforcement bug. This issue affects Apache ZooKeeper: from 3.9.0 through 3.9.5, from 3.8.0 through 3.8.6. Users are recommended to upgrade to version 3.9.6 or 3.8.7, which fixes the issue.

CVE-2026-70469

High

2026-09-16

No exploit published

No public exploit

Apache NiFi 2.11.0 disabled support for gzip-encoded HTTP requests for the application REST API and rejected requests that included the standard Content-Encoding header indicating gzip encoding. The framework enforcement filter did not check multiple instances of the Content-Encoding header and did not reject non-standard identifiers for gzip encoding, allowing a malicious client to send crafted requests that could consume excessive amounts of memory. Upgrading to Apache NiFi 2.12.0 is the recommended mitigation, which disables decompression of gzip-encoded HTTP requests regardless of header number or encoding identifiers.

CVE-2026-59969

High

2026-09-16

No exploit published

No public exploit

Apache ZooKeeper quorum TLS fails to enforce peer hostname verification in FIPS-mode deployments. When sslQuorum=true, zookeeper.fips-mode=true, ssl.quorum.hostnameVerification=true, and ssl.quorum.clientHostnameVerification=true are enabled, the Java SSLSocket quorum path accepts a CA-trusted peer certificate whose SAN does not match the connected host. A malicious or misissued peer certificate can therefore join quorum traffic, participate in leader election, and enter replication flows. Users are recommended to upgrade to version 3.8.7 or 3.9.6, which fixes the issue.

CVE-2026-59739

High

2026-09-16

No exploit published

No public exploit

Information disclosure via SetWatches reconnect replay in Apache ZooKeeper due to missing ACL check. An attacker can discover ACL-restricted paths by registering exists-watches on non-existent paths, then reconnecting after the paths are created with restricted ACLs. Issue is caused by incomplete fix for CVE-2024-23944 (ZOOKEEPER-4799). The fix added ACL checking to WatchManager.triggerWatch(). However, DataTree.setWatches() — the SetWatches/SetWatches2 reconnect replay handler — still calls watcher.process(event) with null ACL, bypassing the check entirely. It's important to note that only the path is exposed by this vulnerability, not the data of znode, but since znode path can contain sensitive information like user name or login ID, this issue is potentially critical. Users are recommended to upgrade to version 3.9.6, 3.8.7 which fixes the issue.

CVE-2026-67211

High

2026-09-11

Protected by Waratek

No public exploit

OOM Denial of Service via Unbounded Map Pre-Sizing in Apache OpenNLP SymSpellModelSerializer Versions Affected: - 3.0.0-M4 - 3.0.0-M5 (The opennlp-spellcheck extension was introduced in 3.0.0-M4. Releases 1.x and 2.x do not contain the affected code.) Description: The SymSpellModelSerializer.create() method reads two 32-bit signed integer count fields (unigramCount and bigramCount) from a binary SymSpell model stream and passes each value directly to LinkedHashMap.newLinkedHashMap() after validating only that it is non-negative. No upper bound is applied, so the count is fully attacker-controlled when the model file originates from an untrusted source. A crafted .bin model file in which either count field is set to Integer.MAX_VALUE (or any value large enough to exhaust the available heap) causes the map to be pre-sized to a capacity of 2^30 entries. The oversized backing array is allocated on the first put() into that map, requesting 4–8 GB depending on whether compressed oops are in effect, and the load fails with an OutOfMemoryError. Because the count fields sit immediately after a fixed-size header (magic, format version, three UTF strings, the configuration fields, and the edit-distance identifier) the attacker pays no meaningful size cost to weaponize a payload: a file of well under 100 bytes plus a single real entry is sufficient to crash a JVM that loads it. Any code path that deserializes a SymSpell model is affected, including SymSpellModels.deserialize(InputStream), SymSpellModels.fromBytes(byte[]), classpath model loading via SymSpellModelResolver.resolveByLanguage(String), the CorrectTextTool command-line tool, and model-archive loading through the registered ArtifactSerializer. The opennlp-spellcheck extension ships in the official OpenNLP binary distribution. The practical impact is denial of service against processes that load SymSpell model files from untrusted or semi-trusted origins. Mitigation: - 3.x users should upgrade to 3.0.0-M6. Note: The fix applies an upper bound to both count fields, checked before the map is pre-sized; counts that are negative or exceed the bound cause an IOException to be thrown and the read to fail fast with no large allocation. The bound is the existing AbstractModelReader.MAX_ENTRIES limit introduced earlie, which the current change promotes to public visibility so that serializers implementing their own binary format can share it. The default bound is 10,000,000, which is well above the entry counts of legitimate SymSpell dictionaries but far below any value that would threaten heap exhaustion. Deployments that legitimately need to load larger dictionaries can raise the limit at JVM startup by setting the OPENNLP_MAX_ENTRIES system property to the desired positive integer (e.g. -DOPENNLP_MAX_ENTRIES=50000000); invalid or non-positive values fall back to the default. Note that this property is shared with the model-reader limit and raising it relaxes both. Users who cannot upgrade immediately should treat all SymSpell .bin model files as untrusted input unless their provenance is verified, and should avoid loading models supplied by end users or fetched from third-party repositories without integrity checks.

CVE-2026-80354

High

2026-09-10

No exploit published

No public exploit

Authorization bypass through User-Controlled key vulnerability in Apache Camel K. An authorization vulnerability in custom resource resolution allows a tenant to reference secrets by name in the operator namespace, potentially exposing secrets belonging to other tenants or operator components. This issue affects Apache Camel K: from 2.0.0 before 2.9.3, from 2.10.1 before 2.10.2. Users are recommended to upgrade to version 2.9.3, 2.10.2 or 2.11.0, which fixes the issue.

CVE-2026-49363

High

2026-09-10

No exploit published

No public exploit

An unauthenticated remote attacker connecting with the CORE protocol can discover cluster node details by sending a SUBSCRIBE_TOPOLOGY request prior to authentication. This issue affects Apache Artemis: from 2.50.0 through 2.56.0; Apache ActiveMQ Artemis: from 1.0.0 through 2.44.0. Users are recommended to upgrade to version 2.57.0, which fixes the issue.

CVE-2026-49362

High

2026-09-10

No exploit published

No public exploit

An unauthenticated remote attacker can create arbitrary durable queues via the CORE protocol, leading to unauthorized broker state manipulation and potential denial of service. This issue affects Apache Artemis: from 2.50.0 through 2.56.0; Apache ActiveMQ Artemis: from 1.0.0 through 2.44.0. Users are recommended to upgrade to version 2.57.0, which fixes the issue.

CVE-2026-74761

High

2026-09-09

No exploit published

No public exploit

Improper input validation in TopicRegion in Apache ActiveMQ, Apache ActiveMQ Broker, and Apache ActiveMQ All on all platforms. An authenticated client can spoof clientId when removing a durable topic subscription. This issue affects Apache ActiveMQ Broker: before 5.19.11, from 6.0.0 before 6.3.2; Apache ActiveMQ All: before 5.19.11, from 6.0.0 before 6.3.2; Apache ActiveMQ: before 5.19.11, from 6.0.0 before 6.3.2. Users are recommended to upgrade to version 6.3.2 or 5.19.11 which fixes the issue.

CVE-2026-73334

High

2026-09-09

No exploit published

No public exploit

Potential problem for users of the org.apache.parquet.crypto.keytools package in Apache Parquet, versions 1.12 to 1.18. This package enables users to encrypt Parquet files via an envelope encryption mechanism that wraps (encrypts) data keys via a Key Management Service (KMS). On the reader side, the KMS URL can be application-controlled or file-controlled. If the user does not leverage application control for this parameter, a file-controlled KMS URL is forwarded to a pluggable KmsClient implementation. If the pluggable implementation does not perform host validation, a KMS token can be sent to a malicious host set by an attacker in the file. Before the problem is fixed, users are recommended to leverage application control for KMS URL parameter in readers (versions 1.12-1.18). After the problem is fixed (presumably in version 1.19), the upgrade will disable file-controlled KMS URL by default. Users of the KMS URL parameter will have two options then: leverage application control for KMS URL parameter in readers, or enable file-controlled KMS URL (via a new app parameter). The latter option will explicitly require (in the new parameter documentation) to validate the KMS URL and use authentication in the custom implementation of the KMS client plug in.

CVE-2026-78254

High

2026-09-07

No exploit published

No public exploit

The ftp and scp tasks of Apache Ant can download files from a remote server. A malicious server can provide relative paths that allow it to write outside of the dedicated target directory for the download, making it possible to overwrite files of the attacker's choice using the permissions of the user running Ant in versions prior to Ant 1.10.18. In order to exploit this vulnerability, the server would either have to be malicious or be subject to a machine-in-the-middle attack. Additionally in the case of scp or the ftp task using ftps the server must pass the server identity checks performed by the tasks. For ftp tasks not using ftps a malicious server could act as a machine-in-the-middle to provide malicious files. Starting with Ant 1.10.18 both tasks will prevent writing outside of the destination directory by default. An option is available to disable this behavior in the unlikely case that the old behavior is required by existing build files. Mitigations: Users of scp and ftp (when using ftps) in any version of Ant should not bypass server identity checks. Users of ftp not using ftps should switch to ftps where possible. All users are recommended to upgrade to Apache Ant 1.10.18, which fixes this issue.

CVE-2026-71257

High

2026-08-31

No exploit published

No public exploit

Apache Wicket enforces the upload limits configured on a form or upload field while parsing a multipart request with Apache Commons FileUpload. If the request body has already been consumed by another component, Commons FileUpload returns no items and Wicket falls back to reading the upload through HttpServletRequest#getParts(). The per-file size limit (for example Form#setFileMaxSize) and the file count limit (Form#setFileCountMax) are not applied to the parts obtained that way, and no exception is raised, so the upload is processed as though those limits had been satisfied. A remote uploader can therefore submit files that are larger, or more numerous, than the application permits, up to whatever the component that parsed the request allows. A part carrying no Content-Type header is additionally read into memory in full during parsing, so the size of that allocation is determined by the request and bounded only by those same external limits. The total upload size limit (Form#setMaxSize) is not affected. Commons FileUpload compares the declared Content-Length against it before reading the body, so a request declaring an oversized length is rejected before the fallback is reached. The fallback is reached in deployments where a servlet or filter has already parsed the request body — for example a servlet annotated with @MultipartConfig, Spring Boot's multipart resolver, or any filter that calls HttpServletRequest#getParameter() on a multipart request. It applies to the Wicket components that accept uploads on that path, including Form with FileUploadField, FileUploadToResourceField and AjaxFileDropBehavior. Applications that configure neither a per-file nor a file-count limit are not affected, as Wicket applies neither by default. This issue affects Apache Wicket: from 8.0.0 through 8.18.0, from 9.0.0 through 9.23.0, from 10.0.0 through 10.10.0. Users are recommended to upgrade to version 8.19.0, 9.24.0 or 10.11.0, which fix the issue. Users of Apache Wicket 7.x or older, which are no longer supported, should upgrade to a supported version. As a workaround, configure equivalent limits in the component that parses the request — for example spring.servlet.multipart.max-file-size and max-request-size, or maxFileSize and maxRequestSize in @MultipartConfig or in the web.xml <multipart-config> element.

CVE-2026-68763

High

2026-08-25

No exploit published

No public exploit

Uncontrolled Resource Consumption vulnerability in Apache Tomcat via an allocation leak in the HTTP/2 backlog tracking when a stream is reset This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.24, from 10.1.0-M1 through 10.1.57, from 9.0.39 through 9.0.120. The following versions were EOL at the time the CVE was created but are known to be affected: from 8.5.59 through 8.5.100. Other unsupported versions may also be affected. Users are recommended to upgrade to version 11.0.25, 10.1.58 or 9.0.121, which fix the issue.

CVE-2026-68569

High

2026-08-25

No exploit published

No public exploit

Improper Authentication vulnerability in Apache Tomcat meant that in some circumstances (e.g. CLIENT-CERT, SPNEGO) that a user would be authenticated even if the user did not exist in the DataSourceRealm. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.24, from 10.1.0-M1 through 10.1.57, from 9.0.0.M1 through 9.0.120. The following versions were EOL at the time the CVE was created but are known to be affected: from 8.5.0 through 8.5.100, from 7.0.0 through 7.0.109. Other unsupported versions may also be affected. Users are recommended to upgrade to version 11.0.25, 10.1.58 or 9.0.121, which fix the issue.

CVE-2026-66422

High

2026-08-25

No exploit published

No public exploit

Improper Authorization vulnerability in Apache Tomcat cause by security-role-ref definitions being incorrectly used as role aliases within the Realm in additional to the correct usage with Request.isUserInRole(). This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.24, from 10.1.0-M1 through 10.1.57, from 9.0.25 through 9.0.120. The following versions were EOL at the time the CVE was created but are known to be affected: from 8.5.46 through 8.5.100, from 7.0.97 through 7.0.109. Other unsupported versions may also be affected. Users are recommended to upgrade to version 11.0.25, 10.1.58 or 9.0.121, which fix the issue.

CVE-2026-65927

High

2026-08-25

No exploit published

No public exploit

Off-by-one Error vulnerability in Apache Tomcat impacting the [N] flag on the rewrite valves causes rewrite processing to restart at the second rule rather than the first rule. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.24, from 10.1.0-M1 through 10.1.57, from 9.0.0.M1 through 9.0.120. The following versions were EOL at the time the CVE was created but are known to be affected: from 8.5.0 through 8.5.100. Other unsupported versions may also be affected. Users are recommended to upgrade to version 11.0.25, 10.1.58 or 9.0.121 which fix the issue.

CVE-2026-65183

High

2026-08-25

No exploit published

No public exploit

Time-of-check Time-of-use (TOCTOU) Race Condition vulnerability in Apache Tomcat when creating unix domain sockets allows an unauthorised local user to access the unix domain socket. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.24, from 10.1.0-M1 through 10.1.57, from 9.0.42 through 9.0.120. Users are recommended to upgrade to version 11.0.25, 10.1.58, 9.0.121, which fixes the issue.

CVE-2026-53561

High

2026-08-25

No exploit published

No public exploit

An improper authentication vulnerability in HiveServer2 SAML bearer-token validation in Apache Hive 4.0.0 through 4.2.0 (and later unreleased branches) on deployments using HTTP transport with hive.server2.authentication=SAML allows an unauthenticated network attacker to authenticate as an arbitrary Hive user and obtain an authenticated HiveServer2 session via a forged Authorization: Bearer token sent to the /cliservice HTTP endpoint. Users are recommended to upgrade to 4.2.1 version that includes the fix for this issue. Access / authorization required: No Hive credentials, SAML IdP login, or knowledge of the server signing secret is required. The attacker only needs network reachability to the HiveServer2 HTTP port (typically /cliservice), directly or through a reverse proxy such as Apache Knox that forwards unauthenticated requests to HS2. The instance must have SAML authentication enabled in HTTP mode. Deployments where Knox handles SSO and HiveServer2 uses LDAP/Kerberos (not native SAML mode) are not affected by this specific issue.

CVE-2026-49050

High

2026-08-25

No exploit published

No public exploit

General user can mint admin access tokens via /access-tokens This issue affects Apache DolphinScheduler: before 3.4.2. Users are recommended to upgrade to version 3.4.2, which fixes the issue.

CVE-2026-66908

High

2026-08-24

No exploit published

No public exploit

Improper Authentication vulnerability in Apache Camel Platform HTTP Main component. This issue affects Apache Camel: from 4.8.0 before 4.22.0. The camel-main embedded HTTP server can protect its endpoints with JWT authentication, configured through authenticationEnabled together with the JWT keystore properties. JWTAuthenticationConfigurer.buildJwtOptions returned null when neither jwtIssuer nor jwtAudience was configured, and the caller then skipped the JWTAuthOptions.setJWTOptions call entirely, so the Vert.x JWTAuth instance was built from the keystore alone. The result was that inbound tokens were checked only for signature and expiry: the iss and aud claims were not validated at all. Nothing signalled this - the server started normally and reported no warning - so a deployment configured the documented way silently enforced less than the operator believed it had enabled, and the component documentation itself presented signature and expiry checking as the default with issuer and audience as an optional extra. Both the application server and the management server were affected, because the omission was in each of the two configureAuthentication paths. Any unexpired token signed by any key the configured keystore trusts was therefore accepted, regardless of which issuer minted it or which audience it was intended for. How far that reaches depends on the trust set of the keystore: where the signing key belongs to a shared or multi-tenant identity provider, a token legitimately issued for an entirely different audience is accepted, while a keystore holding a dedicated signer narrows it to reuse of tokens minted for other services within the same trust domain. The jwtIssuer and jwtAudience options did not exist before 4.21.0, so on earlier releases there was no supported way to have these claims enforced at all. Users are recommended to upgrade to version 4.22.0, which fixes the issue. From 4.22.0 the server refuses to start when a JWT keystore is configured but neither jwtIssuer nor jwtAudience is set, naming the properties involved, and a deployment that genuinely wants signature and expiry validation only must say so explicitly with the new jwtAllowMissingIssuerAndAudience option, which defaults to false. This behaviour is fixed only on 4.22.0. The 4.14.9 and 4.18.4 releases do not change the default: they add the jwtIssuer and jwtAudience options so that operators on those maintenance lines can enforce the claims by configuration, and an installation that upgrades to 4.14.9 or 4.18.4 without also setting at least one of those two properties is still accepting any unexpired token signed by a trusted key. Users on 4.14.x or 4.18.x should therefore upgrade to 4.14.9 or 4.18.4 and then set jwtIssuer, jwtAudience, or both. Releases from 4.8.0 up to and including 4.21.x offer no way to enforce these claims and should be moved to a version that does. Independently of version, restrict the JWT keystore to the smallest possible trust set - ideally a signer dedicated to this service rather than a shared identity-provider key - and where a gateway already validates issuer and audience in front of the server, ensure it cannot be bypassed. Notes: The JIRA ticket: https://issues.apache.org/jira/browse/CAMEL-24281 refers to the various commits that resolved the issue, and has more details. The fail-closed guard could not be backported. The jwtIssuer and jwtAudience options were themselves only introduced in 4.21.0 by CAMEL-23525, so on camel-4.18.x and camel-4.14.x there was nothing an operator could set to satisfy the requirement and the guard would have broken every JWT deployment on those branches with no remedy available.

CVE-2026-66907

High

2026-08-24

Protected by Waratek

No public exploit

Relative path traversal vulnerability in Apache Camel Google Storage component. This issue affects Apache Camel: from 4.0.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0. The camel-google-storage consumer downloads Google Cloud Storage objects to the local filesystem when the downloadFileName option is set. That option is documented as a folder or a filename, and when its value contains no expression token the consumer builds the local destination by appending the object name to it: evaluateFileExpression sets the Exchange file-name header to the remote object name and evaluates downloadFileName + "/${file:name}". The ${file:name} token returns the file-name header verbatim, unlike ${file:onlyname}, which applies FileUtil.stripPath to it. The resulting string was passed directly to new File(result) and blob.downloadTo(file.toPath()) with no lexical normalization and no check that the destination stayed inside the configured directory. The object name is not route-controlled data: the consumer lists the bucket, iterates every returned blob and creates one exchange per object from blob.getBlobId().getName() verbatim, and the filter option that could restrict those names is not applied at all unless it has been explicitly set. Google Cloud Storage object names are opaque UTF-8 keys that the service stores and lists exactly as written, with no server-side canonicalization, and a forward slash is only a display convention for pseudo-directories, so a key containing parent-directory segments survives round-tripping intact. An object name containing such segments therefore resolved to a location outside the configured downloadFileName directory, letting anyone able to influence the names present in the consumed bucket cause Camel to create or overwrite a file at a location of their choosing, with the privileges of the Camel process. Depending on what the process can write to, overwriting a file outside the download directory can escalate beyond the loss of integrity of that file. The downloadFileName option is an ordinary consumer parameter and carries no security marker, so nothing signalled to users that its value was not being enforced as a containment boundary. The defect is consumer-only; the producer has no download-to-file sink. Camel's other file-download consumers - camel-file, camel-ftp, camel-smb, camel-mina-sftp, camel-azure-files and the Azure Storage download paths - already constrained their local downloads to the configured directory using a path-segment boundary check; camel-google-storage was the remaining object-store download sink not covered by that work. Users are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, set the filter option to a regular expression that accepts only simple single-segment object names, so that any name carrying a path separator or a parent-directory segment is excluded before an exchange is created; note that no filtering whatsoever is applied when the option is left unset, and that the expression is matched against the whole object name. Alternatively, give downloadFileName an explicit expression that does not carry the remote path through, for example one built on ${file:onlyname} rather than the implicit ${file:name}, keeping in mind that a downloadFileName containing an expression is treated as route-author-controlled and is not covered by the containment check added in the fix. As defence in depth, treat the object names in any externally writable bucket as untrusted input and do not derive local filesystem paths from them.

CVE-2026-73635

High

2026-08-15

No exploit published

No public exploit

Allocation of resources without limits or throttling vulnerability in Apache Struts. When no fixed locale is configured, the locale used for localized-text lookups is taken from the incoming request, allowing an unauthenticated remote client to cause the framework's internal localized-text caches to grow without bound and exhaust the Java heap, denying service to other users. Applications that configure a fixed locale are not affected. This issue affects Apache Struts: from 2.0.0 through 2.3.37, from 2.5.0 through 2.5.33, from 6.0.0 through 6.10.0, from 7.0.0 through 7.2.1. Users are recommended to upgrade to version 6.11.0 or 7.3.0, which fixes the issue.

CVE-2026-73634

High

2026-08-15

No exploit published

No public exploit

Uncontrolled resource consumption vulnerability in Apache Struts. An application that exposes an endpoint collecting Content Security Policy violation reports reads the submitted report into memory without bounding how much it will accept, so a single request can exhaust the heap and deny service to other users. Such endpoints are ordinarily reachable without authentication. The core distribution maps no such endpoint by default; applications that do not collect violation reports are not affected. This issue affects Apache Struts: from 6.0.0 through 6.10.0, from 7.0.0 through 7.2.1. Users are recommended to upgrade to version 6.11.0 or 7.3.0, which fixes the issue.

CVE-2026-73633

High

2026-08-14

No exploit published

No public exploit

Uncontrolled resource consumption vulnerability in the JSON plugin of Apache Struts. When an application is configured to populate actions from a JSON request body, the plugin reads that body into memory without bounding how much it will accept, so a single request can exhaust the heap and deny service to other users. The plugin's configurable JSON input length limit does not bound this read. The JSON plugin is an optional component; applications that do not use it, or use it without enabling JSON request-body handling, are not affected. This issue affects Apache Struts: from 2.1.8 through 2.3.37, from 2.5.0 through 2.5.33, from 6.0.0 through 6.10.0, from 7.0.0 through 7.2.1. Users are recommended to upgrade to version 6.11.0 or 7.3.0, which fixes the issue.

CVE-2026-66256

High

2026-08-13

Protected by Waratek

No public exploit

** UNSUPPORTED WHEN ASSIGNED ** Deserialization of Untrusted Data vulnerability in Apache Shindig. This issue affects Apache Shindig: all versions. Users with access to the Shindig REST API can send specially-crafted requests to trigger arbitrary code execution on the server. As this project is retired, we do not plan to release a version that fixes this issue. Users are recommended to find an alternative or restrict access to the instance to trusted users. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

CVE-2026-61899

High

2026-08-10

No exploit published

No public exploit

Vulnerability in tapestry-core in Apache Tapestry 5.5.0+ on all platforms allows attackers to download clsspath assets via specially crafted URLs. Users are recommended to upgrade to version 5.9.1, which fixes this issue.

CVE-2026-68481

High

2026-08-06

No exploit published

No public exploit

In Apache CXF's DefaultEncryptingOAuthDataProvider, revoked access tokens still decrypt successfully, and TokenIntrospectionService reports active:true. The same applies to refresh tokens. This violates the RFC stipulations that 'The authorization server MUST invalidate the token.' and 'introspection of a revoked token MUST return {"active":false}'. Users are recommended to upgrade to versions 4.2.3 or 4.1.8 or 3.6.12, which fix this issue.

CVE-2026-65432

High

2026-08-06

Protected by Waratek

No public exploit

Apache CXF reads a top-level WSDL through its hardened StaxUtils path, which disables XML DTDs and external entities. However, any <wsdl:import> or <xsd:import> referenced from that top-level WSDL is handed off to WSDL4J, which does not disable DOCTYPE declarations or external entities. As a result, the protections applied to the top-level document do not extend to imported documents, leaving imported WSDL/XSD content vulnerable to XML External Entity (XXE) attacks. Users are recommended to upgrade to versions 4.2.3 or 4.1.8 or 3.6.12, which fix this issue.

CVE-2026-64958

High

2026-08-06

No exploit published

No public exploit

An incomplete fix for CVE-2026-50645 means that it is still possible to perform a denial of service attack on Apache CXF by sending a message with many attachment headers. Users are recommended to upgrade to versions 4.2.3 or 4.1.8 or 3.6.12, which fix this issue.

CVE-2026-57819

High

2026-08-06

No exploit published

No public exploit

Apache CXF allows to set a limit on the number of form parameters in a JAX-RS message via the "maxFormParameterCount" configuration option. However, no default limit is set which may lead to denial of service attacks when processing requests with very large numbers of form parameters. Users are recommended to upgrade to versions 4.2.3 or 4.1.8 or 3.6.12, which fix this issue by using a default limit of 500 parameters.

CVE-2026-57818

High

2026-08-06

No exploit published

No public exploit

A race condition in JCacheCodeDataProvider allows an attacker to redeem a single authorization code multiple times via concurrent requests, resulting in the issuance of multiple distinct, valid access tokens. Users are recommended to upgrade to versions 4.2.3, 4.1.8 or 3.6.12, which fix this issue.

CVE-2026-57817

High

2026-08-06

No exploit published

No public exploit

The OpenID Connect Core 1.0 specification mandates that the RP MUST validate the `c_hash` parameter when operating in the Hybrid Flow. If an Apache CXF RP is integrated with a non-compliant or misconfigured Identity Provider (IdP) that omits the `c_hash`, the RP becomes vulnerable to Authorization Code Substitution/Injection attacks. Users are recommended to upgrade to versions 4.2.3 or 4.1.8 or 3.6.12, which fix this issue.

CVE-2026-54225

High

2026-08-06

No exploit published

No public exploit

Apache CXF allows to control the maximum attachment size via the "attachment-max-size". Prior to Apache CXF 4.2.3 and 4.1.8 and 3.6.12, there was no default placed on this size, meaning that a denial of service attack is possible if the user doesn't explicitly set the limit. Users should update to Apache CXF 4.2.3 or 4.1.8 or 3.6.12 which fixes this problem by imposing a default attachment size limit of 50mb.

CVE-2026-68074

High

2026-08-05

No exploit published

No public exploit

A pre-authentication attacker could leverage unbounded symbol value caching to cause resource exhaustion leading to denial of service. This issue affects Apache Qpid Broker-J: through 10.0.1. Users are recommended to upgrade to version 10.1.0, which fixes the issue.

CVE-2026-68073

High

2026-08-05

No exploit published

No public exploit

A pre-authentication attacker could leverage type nesting to cause a StackOverflowError potentially leading to denial of service. This issue affects Apache Qpid Broker-J: through 10.0.1. Users are recommended to upgrade to version 10.1.0, which fixes the issue.

CVE-2026-68060

High

2026-08-05

No exploit published

No public exploit

A pre-authentication attacker could leverage type size/count handling to cause excessive allocation leading to potential denial of service. This issue affects Apache Qpid Broker-J: through 10.0.1. Users are recommended to upgrade to version 10.1.0, which fixes the issue.

CVE-2026-67592

High

2026-08-05

No exploit published

No public exploit

It was not possible to govern the maximum number of transfer frames per incoming delivery, enabling an authenticated attacker to cause excessive resource usage and potential denial of service. This issue affects Apache Qpid ProtonJ2: through 1.1.0. Users are recommended to upgrade to version 1.2.0, which fixes the issue

CVE-2026-67590

High

2026-08-05

No exploit published

No public exploit

A pre-authentication attacker could leverage type nesting to cause a StackOverflowError potentially leading to denial of service. This issue affects Apache Qpid ProtonJ2: through 1.1.0. Users are recommended to upgrade to version 1.2.0, which fixes the issue.

CVE-2026-67589

High

2026-08-05

No exploit published

No public exploit

A pre-authentication attacker could leverage type size/count handling to cause excessive allocation leading to potential denial of service. This issue affects Apache Qpid ProtonJ2: through 1.1.0. Users are recommended to upgrade to version 1.2.0, which fixes the issue.

CVE-2026-67588

High

2026-08-05

No exploit published

No public exploit

A pre-authentication attacker could leverage unbounded symbol value caching to cause resource exhaustion leading to denial of service. This issue affects Apache Qpid ProtonJ2: through 1.1.0. Users are recommended to upgrade to version 1.2.0, which fixes the issue.

CVE-2026-66274

High

2026-08-05

No exploit published

No public exploit

A pre-authentication attacker could leverage type nesting to cause a StackOverflowError potentially leading to denial of service. This issue affects Apache Qpid Proton-J: through 0.34.1. Users are recommended to upgrade to version 0.35.0, which fixes the issue.

CVE-2026-66273

High

2026-08-05

No exploit published

No public exploit

A pre-authentication attacker could leverage type size/count handling to cause excessive allocation leading to potential denial of service. This issue affects Apache Qpid Proton-J: through 0.34.1. Users are recommended to upgrade to version 0.35.0, which fixes the issue.

CVE-2026-66257

High

2026-08-05

No exploit published

No public exploit

A pre-authentication attacker could leverage unbounded symbol value caching to cause resource exhaustion leading to denial of service. This issue affects Apache Qpid Proton-J: through 0.34.1. Users are recommended to upgrade to version 0.35.0, which fixes the issue.

CVE-2026-68981

High

2026-08-03

No exploit published

No public exploit

Apache NiFi 1.5.0 through 2.10.0 support gzip-encoded HTTP requests for the application REST API using a Jersey encoding filter. The framework enforced a configurable maximum request size on the compressed payload rather than the decompressed output, allowing a malicious client to send crafted requests that could consume excessive amounts of memory. Upgrading to Apache NiFi 2.11.0 is the recommended mitigation, which relocates response compression to Jetty Server and disables decompression of gzip-encoded HTTP requests.

CVE-2026-62354

High

2026-08-03

No exploit published

No public exploit

Authorization handling for Parameter Context validation requests in Apache NiFi 1.10.0 through 2.10.0 allows clients with read access to submit proposed Parameter values. The proposed values override current configuration, enabling users with read access to invoke predefined component validation methods with alternative settings. Apache NiFi installations that do not implement different levels of authorization for viewing and modifying Parameter Context configuration are not subject to this vulnerability. Upgrading to Apache NiFi 2.11.0 is the recommended mitigation, requiring write access to submit Parameter Context validation requests.

CVE-2026-62391

High

2026-07-31

Protected by Waratek

No public exploit

The security fix for CVE-2025-66518 is incomplete. Any client who can access to Apache Kyuubi Server via Kyuubi frontend protocols can bypass server-side config kyuubi.session.local.dir.allowlist via unprefixed Spark config aliases. This issue affects Apache Kyuubi: from 1.6.0 before 1.12.0. Users are recommended to upgrade to version 1.12.0, which fixes the issue.

CVE-2026-50622

High

2026-07-29

No exploit published

No public exploit

Description: Missing Authorization in Apache Atlas. A missing authorization vulnerability in Apache Atlas's admin endpoints allows any authenticated user, regardless of their assigned role, to perform administrative operations. Affect Version: This issue affects Apache Atlas: from 0.8 through 2.5.0. Mitigation: Users are recommended to upgrade to version 2.6.0, which fixes the issue.

CVE-2026-23904

High

2026-07-29

No exploit published

No public exploit

Kyuubi Engine UI proxy accepts a host and port from the request path and proxies HTTP requests to that destination. A remote requester with network access to the proxy can cause the Kyuubi server to send HTTP requests to arbitrary reachable hosts, resulting in SSRF or open-proxy behavior. This issue affects Apache Kyuubi: from 1.8.0 before 1.12.0. Users are recommended to upgrade to version 1.12.0, which disables the proxy by default. To restore proxied Engine UI, set kyuubi.frontend.rest.engine.ui.proxy.enabled=true and configure allowed target hosts with kyuubi.frontend.rest.engine.ui.proxy.hosts.

CVE-2026-66299

High

2026-07-28

No exploit published

No public exploit

Uncontrolled Resource Consumption vulnerability in Apache Tomcat's WebSocket chat example. This issue affects Apache Tomcat: from 11.0.0-M20 through 11.0.24, from 10.1.24 through 10.1.57, from 9.0.89 through 9.0.120. Users who have followed the security guidance to remove the examples web application are not affected by this issue. Users are recommended to remove the examples web application or to upgrade to version 11.0.25, 10.1.58 or 9.0.121 (when released), which fix the issue.

CVE-2026-59878

High

2026-07-28

No exploit published

No public exploit

Improper Input Validation vulnerability in Apache ActiveMQ AMQP, Apache ActiveMQ, Apache ActiveMQ All. A remote unauthenticated peer that can reach an exposed AMQP NIO connector can trigger denial-of-service behavior by sending a frame size value. This cause the NIO threads to die and if done rapidly enough can lead to exhaustion of the NIO thread pool denying service to other connections. This issue affects Apache ActiveMQ AMQP: before 5.19.9, from 6.0.0 before 6.2.8; Apache ActiveMQ: before 5.19.9, from 6.0.0 before 6.2.8; Apache ActiveMQ All: before 5.19.9, from 6.0.0 before 6.2.8. Users are recommended to upgrade to version 5.19.9, 6.2.8, or 6.3.0 which fixes the issue.

CVE-2026-48586

High

2026-07-27

No exploit published

No public exploit

Improper Handling of Highly Compressed Data (Data Amplification) vulnerability in Apache Thrift C++, Java, Python, Go, D, C/GLib bindings. This issue affects Apache Thrift: before 0.24.0. Users are recommended to upgrade to version 0.24.0, which fixes the issue.

CVE-2026-43871

High

2026-07-27

No exploit published

No public exploit

Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability in Apache Thrift Python, Go, PHP and Java bindings.This issue affects Apache Thrift: before 0.24.0. Users are recommended to upgrade to version 0.24.0, which fixes the issue.

CVE-2026-66144

High

2026-07-24

No exploit published

No public exploit

Although remote policy references are not retrieved during policy normalization, if they are manually retrieved via the API it can cause a denial of service attack if a huge policy is retrieved. Users are recommended to upgrade to version 3.2.3, which fixes this issue by imposing a default maximum size on data read from remote policy references.

CVE-2026-66143

High

2026-07-24

No exploit published

No public exploit

It is possible to bypass the maximum number of normalized policy alternatives that was introduced in Apache Neethi 3.2.2 via certain crafted policies, which may lead to a denial of service attack via resource consumption. Users are recommended to upgrade to version 3.2.3, which fixes this issue.

CVE-2026-66142

High

2026-07-24

No exploit published

No public exploit

Apache Neethi is vulnerable to uncontrolled recursion when parsing policies that lack policy Ids or with deeply nested structures, which may lead to a denial of service attack when parsing policies due to runtime memory exhaustion. Users are recommended to upgrade to version 3.2.3, which fixes this issue.

CVE-2026-62418

High

2026-07-20

No exploit published

No public exploit

Low-privileged authenticated Server-Side Request Forgery (SSRF) vulnerability in Apache Syncope via Connectors and Resources check. This issue affects Apache Syncope: from 3.0.0-M0 through 3.0.16, from 4.0.0-M0 Through 4.0.6, from 4.1.0-M0 through 4.1.1. Users are recommended to upgrade to version 4.0.7 / 4.1.2, which fix this issue.

CVE-2026-56624

High

2026-07-20

No exploit published

No public exploit

Improper certificate validation in Apache MINA SSHD (server-side). Apache MINA SSHD is a Java library for client-side and server-side SSH. Server-side OpenSSH user certificate validation during user authentication in an Apache MINA SSHD server did not check for the unsupported force-command or verify-required options that could be embedded in the certificate, nor did it validate these options. As a result it was possible that a user could authenticate with such a certificate that included a force-command option but still was able to execute other commands. What other command exactly would be available to the user depends on the implementation of the server. This issue is fixed in Apache MINA SSHD 2.19.0 and 3.0.0-M5. Applications are advised to upgrade to these versions. The fix rejects OpenSSH user certificates that include these options, since Apache MINA SSHD implements neither force-command nor sk-*-cert-v01@openssh.com user certificates (which are the only ones for which verify-required would make sense).

CVE-2026-56623

High

2026-07-20

Protected by Waratek

No public exploit

Path traversal on Windows in Apache MINA SSHD component sshd-git. Apache MINA SSHD is a Java library for client-side and server-side SSH. A git server implemented with Apache MINA SSHD component sshd-git and running on Windows could allow an authenticated remote user access to git repositories outside of the configured server-side root directory. The path validation applied for CVE-2026-48827 in Apache MINA SSHD 2.18.0 and 3.0.0-M4 was partly ineffective for Servers running on Windows. Applications are affected if they use org.apache.sshd:sshd-git to implement a git server and run on Windows. Applications not using sshd-git or not running on Windows are not affected. Users are advised to upgrade affected applications to Apache MINA SSHD 2.19.0, which fixes the issue. The issue also is present in the pre-release milestones 3.0.0-M1 to 3.0.0-M4 for a new upcoming new major version 3.0.0. Again, applications are affected only if they use sshd-git and run on Windows. Upgrade affected applications to 3.0.0-M5.

CVE-2026-56452

High

2026-07-20

Protected by Waratek

No public exploit

Path traversal in the sshd-scp component of Apache MINA SSHD. Apache MINA SSHD is a Java library for client-side and server-side SSH. The implementation of receiving files or directories via SCP did not validate filenames in SCP "C" or "D" commands. A malicious sender could send filenames containing paths, resulting in files to be written in attacker-controlled places. The issue affects only * applications that use no longer supported Apache MINA SSHD versions < 2.0.0 and use the SCP functions to receive files, * or applications using sshd-scp in Apache MINA SSHD >= 2.0.0 to receive files. Applications using Apache MINA SSHD >= 2.0.0 not using sshd-scp are not affected. The issue is fixed in Apache MINA 2.19.0 and 3.0.0-M5. Affected applications are advised to upgrade to these versions.

CVE-2026-57111

High

2026-07-09

No exploit published

No public exploit

Permissive Cross-Origin Resource Sharing (CORS) in the REST API (helix-rest, org.apache.helix.rest.server.filters.CORSFilter) in Apache Helix through 2.0.0 on all platforms allows a remote attacker controlling a web page visited by an authorized user to read responses from and issue cross-origin requests to administrative REST endpoints via a cross-origin request from an arbitrary origin, since the filter unconditionally returns Access-Control-Allow-Origin: * together with Access-Control-Allow-Credentials: true and reflects arbitrary Access-Control-Request-Method / Access-Control-Request-Headers values in preflight responses. Users are recommended to upgrade to version 2.0.1, which fixes this issue.

CVE-2026-55994

High

2026-07-06

No exploit published

No public exploit

Improper Input Validation, Exposure of Sensitive Information to an Unauthorized Actor, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel in Iggy component. The camel-iggy consumer mapped the user-headers of inbound Iggy messages into the Camel Exchange header map without applying any HeaderFilterStrategy (IggyFetchRecords copied the message user-headers straight into the Exchange). Because nothing blocked the Camel header namespace, an actor able to publish to the consumed Iggy stream/topic could set Camel-internal control headers - including CamelHttpUri (Exchange.HTTP_URI) - simply by supplying them as message user-headers. In a route where the Iggy consumer feeds a downstream HTTP producer, the injected CamelHttpUri redirects the server-side HTTP request to an attacker-chosen destination (server-side request forgery - for example to an internal service or a cloud metadata endpoint). In addition, the HTTP producer resolves Camel property placeholders on the resulting (attacker-controlled) URI, so placeholders embedded in the injected value - such as an environment-variable reference, an application property, or a vault reference - are resolved to their real values and sent to the attacker, disclosing environment variables, application properties and vault secrets. This issue affects Apache Camel: from 4.17.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix adds a dedicated IggyHeaderFilterStrategy (and a headerFilterStrategy endpoint option) that filters the Camel header namespace case-insensitively on inbound mapping, so externally-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from the inbound message before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), restrict who can publish to the consumed Iggy stream/topic, and avoid bridging an untrusted consumer directly into an HTTP producer whose target URI can be driven from message headers.

CVE-2026-55993

High

2026-07-06

No exploit published

No public exploit

Improper Input Validation, Exposure of Sensitive Information to an Unauthorized Actor, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel in Atmosphere Websocket Component. The camel-atmosphere-websocket consumer mapped inbound WebSocket query parameters into the Camel Exchange header map without applying any HeaderFilterStrategy (WebsocketConsumer.sendEventNotification() iterates the query-string map collected in WebsocketConsumer.service() and copies each entry into the Exchange). Because nothing blocked the Camel header namespace, a client connecting to the WebSocket endpoint could set Camel-internal control headers - including CamelHttpUri (Exchange.HTTP_URI) - simply by supplying them as query parameters. In a route where the WebSocket consumer feeds a downstream HTTP producer, the injected CamelHttpUri redirects the server-side HTTP request to an attacker-chosen destination (server-side request forgery - for example to an internal service or a cloud metadata endpoint). In addition, the HTTP producer resolves Camel property placeholders on the resulting (attacker-controlled) URI, so placeholders embedded in the injected value - such as an environment-variable reference, an application property, or a vault reference - are resolved to their real values and sent to the attacker, disclosing environment variables, application properties and vault secrets. When the WebSocket endpoint is exposed without authentication, this is reachable by an unauthenticated remote attacker. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes the consumer apply the HeaderFilterStrategy it already inherits from the HTTP/servlet stack, filtering the Camel header namespace case-insensitively on inbound mapping, so externally-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from the inbound message before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), require authentication on the WebSocket endpoint, and avoid bridging an untrusted consumer directly into an HTTP producer whose target URI can be driven from message headers.

CVE-2026-49042

High

2026-07-06

No exploit published

No public exploit

Improper Input Validation vulnerability in Apache Camel. This issue affects Apache Camel: from 4.8.0 through 4.18.2, from 4.19.0 through 4.20.0. Users are recommended to upgrade to version 4.18.3, 4.21.0, which fixes the issue.

CVE-2026-46726

High

2026-07-06

No exploit published

No public exploit

Improper Input Validation, Exposure of Sensitive Information to an Unauthorized Actor, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel in Vertx Websocket component. The camel-vertx-websocket consumer mapped inbound WebSocket query and path parameters into the Camel Exchange header map without applying any HeaderFilterStrategy (VertxWebsocketConsumer.populateExchangeHeaders()). Because nothing blocked the Camel header namespace, a client connecting to the WebSocket endpoint could set Camel-internal control headers - including CamelHttpUri (Exchange.HTTP_URI) - simply by supplying them as query parameters. In a route where the WebSocket consumer feeds a downstream HTTP producer, the injected CamelHttpUri redirects the server-side HTTP request to an attacker-chosen destination (server-side request forgery - for example to an internal service or a cloud metadata endpoint). In addition, the HTTP producer resolves Camel property placeholders on the resulting (attacker-controlled) URI, so placeholders embedded in the injected value - such as an environment-variable reference, an application property, or a vault reference - are resolved to their real values and sent to the attacker, disclosing environment variables, application properties and vault secrets. When the WebSocket endpoint is exposed without authentication, this is reachable by an unauthenticated remote attacker. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes the affected consumers apply a HeaderFilterStrategy that filters the Camel header namespace case-insensitively on inbound mapping, so externally-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from the inbound message before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), require authentication on the WebSocket endpoint, and avoid bridging an untrusted consumer directly into an HTTP producer whose target URI can be driven from message headers.

CVE-2026-46592

High

2026-07-06

No exploit published

No public exploit

Improper Input Validation, Unintended Proxy or Intermediary ('Confused Deputy') vulnerability in Apache Camel CXF SOAP component. The camel-cxf producer selects which SOAP operation to invoke on the backend service from the operationName (and operationNamespace) Exchange header, whose constant values (CxfConstants.OPERATION_NAME / OPERATION_NAMESPACE) were the plain strings operationName / operationNamespace. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a cxf: producer, any HTTP client could therefore set the operationName header and have CxfProducer resolve and invoke a different WSDL operation than the route intended - for example replacing a read operation with a destructive one - against the backend SOAP service (a confused-deputy redirection). The constant is defined in the shared camel-cxf-common module, so the same non-prefixed names also applied to camel-cxfrs. No credentials are required when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, the operation-selection headers are named CamelCxfOperationName / CamelCxfOperationNamespace and are filtered at transport boundaries; see the 4.21 upgrade guide for the cross-transport carrier-header pattern. For deployments that cannot upgrade immediately, do not select the CXF operation from untrusted input: strip the operationName and operationNamespace headers from any untrusted ingress before the cxf: producer and set the operation from a trusted source in the route.

CVE-2026-46591

High

2026-07-06

No exploit published

No public exploit

Improper Neutralization of Special Elements in Data Query Logic vulnerability in Apache Camel Neo4J component. The camel-neo4j producer builds the Cypher WHERE clause for its match/retrieve and delete operations from the CamelNeo4jMatchProperties map. CVE-2025-66169 addressed Cypher injection through the property values by binding them as query parameters ($paramN), but the property names (the JSON keys of that map) were still concatenated into the query string verbatim in Neo4jProducer.retrieveNodes() and deleteNode(). A property name containing Cypher syntax therefore alters the structure of the executed query. Where a route maps untrusted input into the CamelNeo4jMatchProperties map - for example by passing a request body as the match map, or from a consumer that does not filter inbound Camel* headers - an attacker who controls the JSON key names can inject arbitrary Cypher and read, modify or delete any node or relationship in the Neo4j database. The CamelNeo4jMatchProperties header is itself Camel-prefixed and is filtered by the HTTP header-filter strategy, so a plain HTTP client cannot set it directly; the issue is reachable through routes that deliberately or inadvertently carry untrusted data into that header. This issue affects Apache Camel: from 4.10.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, do not populate the CamelNeo4jMatchProperties map from untrusted input: validate or allow-list the property names (for example against ^[A-Za-z_][A-Za-z0-9_]*$) before the Neo4j producer, and ensure that any consumer feeding such a route filters inbound Camel* / camel* headers so the match header cannot be supplied by an external sender.

CVE-2026-46590

High

2026-07-06

Protected by Waratek

No public exploit

Deserialization of Untrusted Data vulnerability in Apache Camel PQC component. The camel-pqc component persists post-quantum key metadata (KeyMetadata) through pluggable KeyLifecycleManager implementations. HashicorpVaultKeyLifecycleManager and AwsSecretsManagerKeyLifecycleManager read that metadata back from the configured secret backend by deserializing a Base64-wrapped value with a raw java.io.ObjectInputStream.readObject() and no ObjectInputFilter or class allow-list; the cast to KeyMetadata happens only after readObject() returns, so any readObject() side effects in a crafted object run before the type check. The same unfiltered legacy-migration read also remained in FileBasedKeyLifecycleManager (for the stored KeyPair and KeyMetadata). A principal who can write to the operator-controlled backend that holds these values - the HashiCorp Vault KV path, or the AWS Secrets Manager secret (requiring a Vault token or secretsmanager:PutSecretValue) - could store a crafted serialized object that is deserialized during normal key-lifecycle operations, potentially leading to code execution in the context of the application that manages the keys. This is an incomplete-remediation follow-on to CVE-2026-40048 (CAMEL-23200), which changed FileBasedKeyLifecycleManager to store metadata as JSON / PKCS#8 / X.509 but did not add an ObjectInputFilter, did not cover the Vault and AWS sibling managers, and left FileBasedKeyLifecycleManager's own legacy-migration deserialization unfiltered. This issue affects Apache Camel: from 4.18.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.18.x LTS releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, restrict write access to the key backend so that only the application's own identity can write the camel-pqc secrets (least-privilege HashiCorp Vault policies and secretsmanager:PutSecretValue IAM), and keep the PQC key material in a backend separate from any data that less-trusted principals can write.

CVE-2026-46588

High

2026-07-06

No exploit published

No public exploit

Improper Input Validation vulnerability in Apache Camel. This issue affects Apache Camel: through 4.14.7, from 4.15.0 through 4.18.2, from 4.19.0 through 4.20.0. Users are recommended to upgrade to version 4.14.8, 4.18.3, 4.21.0, which fixes the issue.

CVE-2026-46587

High

2026-07-06

No exploit published

No public exploit

CVE-2026-46585

High

2026-07-06

No exploit published

No public exploit

Improper Input Validation, Authorization Bypass Through User-Controlled Key vulnerability in Apache Camel Lucene Component. The camel-lucene producer reads the search phrase from an Exchange header (LuceneConstants.HEADER_QUERY) whose value was the plain string QUERY (and RETURN_LUCENE_DOCS for HEADER_RETURN_LUCENE_DOCS). Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that exposes a Lucene query operation behind an HTTP consumer (for example platform-http), any HTTP client could therefore set the QUERY header and have its value executed against the full-text index, overriding the query the route intended to run. Depending on what is indexed, this allows reading documents the request should not have access to (for example a match-all query returns the entire index, or the route's intended per-user filter can be replaced), and expensive regular-expression queries can consume significant CPU. No credentials are required when the HTTP consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set the query via the raw header name must use CamelLuceneQuery (and CamelLuceneReturnLuceneDocs) instead of QUERY / RETURN_LUCENE_DOCS. For deployments that cannot upgrade immediately, strip the attacker-controllable headers before the Lucene producer and set the query from a trusted source (for example removeHeader('QUERY') and removeHeader('RETURN_LUCENE_DOCS'), then setHeader('QUERY', constant(...)) at the start of the route).