Overview 2,291 matches · 41 in Waratek scope · 18 protected · 26 exploited · 11 CISA KEV · 58 public PoC · 35 EPSS ≥ 0.5
2,291matches
41in Waratek scope1.8%
18protected0.8%
26exploited1.1%
11CISA KEV0.5%
58public PoC2.5%
35EPSS ≥ 0.51.5%
Protected by Waratek
18
0.8%
Rule in development
0
0.0%
Mitigation candidate
0
0.0%
No exploit published
23
1.0%
Outside Waratek scope
277
12.1%
Not applicable
1,973
86.1%
Withdrawn CVE
0
0.0%
blocked by ARMR today
18
0.8%
partly blocked
0
0.0%
not blocked
2,273
99.2%
not established
0
0.0%
unrecorded
0
0.0%
split by
peak 439 / year
20045
Not applicable5
Medium5
not blocked5
Working exploit published1
No public exploit4
200519
Not applicable19
Medium19
not blocked19
Working exploit published4
No public exploit15
20063
Not applicable3
Medium3
not blocked3
Working exploit published1
No public exploit2
200712
Not applicable12
Medium12
not blocked12
Working exploit published1
No public exploit11
200820
Not applicable20
Medium20
not blocked20
Working exploit published2
No public exploit18
200921
No exploit published1
Not applicable20
Medium21
not blocked21
Working exploit published2
No public exploit19
201017
Outside Waratek scope1
Not applicable16
Medium17
not blocked17
Working exploit published3
No public exploit14
201117
Not applicable17
Medium17
not blocked17
Exploited1
Working exploit published2
No public exploit14
20127
Not applicable7
Medium7
not blocked7
Working exploit published1
No public exploit6
201324
Not applicable24
Medium24
not blocked24
Working exploit published2
No public exploit22
201450
Outside Waratek scope3
Not applicable47
Medium50
not blocked50
Working exploit published1
Forecast only3
No public exploit46
201596
No exploit published7
Outside Waratek scope4
Not applicable85
Medium96
not blocked96
Working exploit published2
Proof of concept only1
No public exploit93
201638
Protected by Waratek1
No exploit published1
Not applicable36
Medium38
blocked by ARMR today1
not blocked37
Proof of concept only1
Forecast only2
No public exploit35
201738
No exploit published1
Outside Waratek scope2
Not applicable35
Medium38
not blocked38
No public exploit38
201831
No exploit published1
Not applicable30
Medium31
not blocked31
No public exploit31
2019295
Protected by Waratek1
Outside Waratek scope51
Not applicable243
Medium295
blocked by ARMR today1
not blocked294
Exploited5
Working exploit published3
Forecast only1
No public exploit286
2020400
Protected by Waratek6
Outside Waratek scope88
Not applicable306
Medium400
blocked by ARMR today6
not blocked394
Exploited5
Working exploit published2
Proof of concept only5
Forecast only2
No public exploit386
2021439
Protected by Waratek8
No exploit published5
Outside Waratek scope59
Not applicable367
Medium439
blocked by ARMR today8
not blocked431
Exploited7
Working exploit published2
Proof of concept only13
Forecast only7
No public exploit410
2022379
Protected by Waratek2
No exploit published4
Outside Waratek scope40
Not applicable333
Medium379
blocked by ARMR today2
not blocked377
Exploited3
Proof of concept only23
Forecast only1
No public exploit352
2023270
No exploit published1
Outside Waratek scope26
Not applicable243
Medium270
not blocked270
Exploited3
Working exploit published2
Proof of concept only46
Forecast only2
No public exploit217
2024108
No exploit published2
Outside Waratek scope3
Not applicable103
Medium108
not blocked108
Exploited2
Proof of concept only12
Forecast only1
No public exploit93
20250
20262
Not applicable2
Medium2
not blocked2
No public exploit2
200420062008201020122014201620182020202220242026
| CVE | Severity | Published▾ | Status | Exploitation | Description |
|---|---|---|---|---|---|
| CVE-2026-54231 | Medium | 2026-06-13 | Not applicable | No public exploit | A content injection vulnerability was found in the ABRT post-create event handler scripts in libreport. The event script queries the systemd journal for log entries matching the crashed process and writes the results to files in the dump directory without sanitizing embedded control characters. A local user can inject arbitrary content into the journal output by embedding newline characters in syslog messages, controlling the content that root writes to dump directory files. |
| CVE-2026-35094 | Medium | 2026-04-01 | Not applicable | No public exploit | A flaw was found in libinput. An attacker capable of deploying a Lua plugin file in specific system directories can exploit a dangling pointer vulnerability. This occurs when a garbage collection cleanup function is called, leaving a pointer that can then be printed to system logs. This could potentially expose sensitive data if the memory location is re-used, leading to information disclosure. For this exploit to work, Lua plugins must be enabled in libinput and loaded by the compositor. |
| CVE-2023-4134 | Medium | 2024-11-14 | Not applicable | No public exploit | A use-after-free vulnerability was found in the cyttsp4_core driver in the Linux kernel. This issue occurs in the device cleanup routine due to a possible rearming of the watchdog_timer from the workqueue. This could allow a local user to crash the system, causing a denial of service. |
| CVE-2024-38277 | Medium | 2024-06-18 | Not applicable | No public exploit | A unique key should be generated for a user's QR login key and their auto-login key, so the same key cannot be used interchangeably between the two. |
| CVE-2024-38274 | Medium | 2024-06-18 | Not applicable | No public exploit | Insufficient escaping of calendar event titles resulted in a stored XSS risk in the event deletion prompt. |
| CVE-2024-38273 | Medium | 2024-06-18 | Not applicable | No public exploit | Insufficient capability checks meant it was possible for users to gain access to BigBlueButton join URLs they did not have permission to access. |
| CVE-2024-5840 | Medium | 2024-06-11 | Not applicable | No public exploit | Policy bypass in CORS in Google Chrome prior to 126.0.6478.54 allowed a remote attacker to bypass discretionary access control via a crafted HTML page. (Chromium security severity: Medium) |
| CVE-2024-5458 | Medium | 2024-06-09 | Not applicable | Proof of concept only | In PHP versions 8.1.* before 8.1.29, 8.2.* before 8.2.20, 8.3.* before 8.3.8, due to a code logic error, filtering functions such as filter_var when validating URLs (FILTER_VALIDATE_URL) for certain types of URLs the function will result in invalid user information (username + password part of URLs) being treated as valid user information. This may lead to the downstream code accepting invalid URLs as valid and parsing them incorrectly. |
| CVE-2024-2408 | Medium | 2024-06-09 | Not applicable | Proof of concept only | The openssl_private_decrypt function in PHP, when using PKCS1 padding (OPENSSL_PKCS1_PADDING, which is the default), is vulnerable to the Marvin Attack unless it is used with an OpenSSL version that includes the changes from this pull request: https://github.com/openssl/openssl/pull/13817 (rsa_pkcs1_implicit_rejection). These changes are part of OpenSSL 3.2 and have also been backported to stable versions of various Linux distributions, as well as to the PHP builds provided for Windows since the previous release. All distributors and builders should ensure that this version is used to prevent PHP from being vulnerable. PHP Windows builds for the versions 8.1.29, 8.2.20 and 8.3.8 and above include OpenSSL patches that fix the vulnerability. |
| CVE-2024-35200 | Medium | 2024-05-29 | Not applicable | No public exploit | When NGINX Plus or NGINX OSS are configured to use the HTTP/3 QUIC module, undisclosed HTTP/3 requests can cause NGINX worker processes to terminate. |
| CVE-2024-34161 | Medium | 2024-05-29 | Not applicable | No public exploit | When NGINX Plus or NGINX OSS are configured to use the HTTP/3 QUIC module and the network infrastructure supports a Maximum Transmission Unit (MTU) of 4096 or greater without fragmentation, undisclosed QUIC packets can cause NGINX worker processes to leak previously freed memory. |
| CVE-2024-32760 | Medium | 2024-05-29 | Not applicable | No public exploit | When NGINX Plus or NGINX OSS are configured to use the HTTP/3 QUIC module, undisclosed HTTP/3 encoder instructions can cause NGINX worker processes to terminate or cause or other potential impact. |
| CVE-2024-31079 | Medium | 2024-05-29 | Not applicable | No public exploit | When NGINX Plus or NGINX OSS are configured to use the HTTP/3 QUIC module, undisclosed HTTP/3 requests can cause NGINX worker processes to terminate or cause other potential impact. This attack requires that a request be specifically timed during the connection draining process, which the attacker has no visibility and limited influence over. |
| CVE-2024-35947 | Medium | 2024-05-19 | Not applicable | No public exploit | In the Linux kernel, the following vulnerability has been resolved: dyndbg: fix old BUG_ON in >control parser Fix a BUG_ON from 2009. Even if it looks "unreachable" (I didn't really look), lets make sure by removing it, doing pr_err and return -EINVAL instead. |
| CVE-2023-46842 | Medium | 2024-05-16 | Not applicable | No public exploit | Unlike 32-bit PV guests, HVM guests may switch freely between 64-bit and other modes. This in particular means that they may set registers used to pass 32-bit-mode hypercall arguments to values outside of the range 32-bit code would be able to set them to. When processing of hypercalls takes a considerable amount of time, the hypervisor may choose to invoke a hypercall continuation. Doing so involves putting (perhaps updated) hypercall arguments in respective registers. For guests not running in 64-bit mode this further involves a certain amount of translation of the values. Unfortunately internal sanity checking of these translated values assumes high halves of registers to always be clear when invoking a hypercall. When this is found not to be the case, it triggers a consistency check in the hypervisor and causes a crash. |
| CVE-2024-4950 | Medium | 2024-05-15 | Not applicable | No public exploit | Inappropriate implementation in Downloads in Google Chrome prior to 125.0.6422.60 allowed a remote attacker who convinced a user to engage in specific UI gestures to perform UI spoofing via a crafted HTML page. (Chromium security severity: Low) |
| CVE-2024-4855 | Medium | 2024-05-14 | Not applicable | No public exploit | Use after free issue in editcap could cause denial of service via crafted capture file |
| CVE-2024-4853 | Medium | 2024-05-14 | Not applicable | No public exploit | Memory handling issue in editcap could cause denial of service via crafted capture file |
| CVE-2024-31444 | Medium | 2024-05-14 | Not applicable | No public exploit | Cacti provides an operational monitoring and fault management framework. Prior to version 1.2.27, some of the data stored in `automation_tree_rules_form_save()` function in `automation_tree_rules.php` is not thoroughly checked and is used to concatenate the HTML statement in `form_confirm()` function from `lib/html.php` , finally resulting in cross-site scripting. Version 1.2.27 contains a patch for the issue. |
| CVE-2024-31443 | Medium | 2024-05-14 | Not applicable | No public exploit | Cacti provides an operational monitoring and fault management framework. Prior to 1.2.27, some of the data stored in `form_save()` function in `data_queries.php` is not thoroughly checked and is used to concatenate the HTML statement in `grow_right_pane_tree()` function from `lib/html.php` , finally resulting in cross-site scripting. Version 1.2.27 contains a patch for the issue. |
| CVE-2024-3044 | Medium | 2024-05-14 | Not applicable | No public exploit | Unchecked script execution in Graphic on-click binding in affected LibreOffice versions allows an attacker to create a document which without prompt will execute scripts built-into LibreOffice on clicking a graphic. Such scripts were previously deemed trusted but are now deemed untrusted. |
| CVE-2024-29894 | Medium | 2024-05-14 | Not applicable | No public exploit | Cacti provides an operational monitoring and fault management framework. Versions of Cacti prior to 1.2.27 contain a residual cross-site scripting vulnerability caused by an incomplete fix for CVE-2023-50250. `raise_message_javascript` from `lib/functions.php` now uses purify.js to fix CVE-2023-50250 (among others). However, it still generates the code out of unescaped PHP variables `$title` and `$header`. If those variables contain single quotes, they can be used to inject JavaScript code. An attacker exploiting this vulnerability could execute actions on behalf of other users. This ability to impersonate users could lead to unauthorized changes to settings. Version 1.2.27 fixes this issue. |
| CVE-2024-27834 | Medium | 2024-05-14 | Not applicable | Exploited | The issue was addressed with improved checks. This issue is fixed in Safari 17.5, iOS 16.7.8 and iPadOS 16.7.8, iOS 17.5 and iPadOS 17.5, macOS Sonoma 14.5, tvOS 17.5, watchOS 10.5. An attacker with arbitrary read and write capability may be able to bypass Pointer Authentication. |
| CVE-2024-27399 | Medium | 2024-05-14 | Not applicable | No public exploit | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: l2cap: fix null-ptr-deref in l2cap_chan_timeout There is a race condition between l2cap_chan_timeout() and l2cap_chan_del(). When we use l2cap_chan_del() to delete the channel, the chan->conn will be set to null. But the conn could be dereferenced again in the mutex_lock() of l2cap_chan_timeout(). As a result the null pointer dereference bug will happen. The KASAN report triggered by POC is shown below: [ 472.074580] ================================================================== [ 472.075284] BUG: KASAN: null-ptr-deref in mutex_lock+0x68/0xc0 [ 472.075308] Write of size 8 at addr 0000000000000158 by task kworker/0:0/7 [ 472.075308] [ 472.075308] CPU: 0 PID: 7 Comm: kworker/0:0 Not tainted 6.9.0-rc5-00356-g78c0094a146b #36 [ 472.075308] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu4 [ 472.075308] Workqueue: events l2cap_chan_timeout [ 472.075308] Call Trace: [ 472.075308] <TASK> [ 472.075308] dump_stack_lvl+0x137/0x1a0 [ 472.075308] print_report+0x101/0x250 [ 472.075308] ? __virt_addr_valid+0x77/0x160 [ 472.075308] ? mutex_lock+0x68/0xc0 [ 472.075308] kasan_report+0x139/0x170 [ 472.075308] ? mutex_lock+0x68/0xc0 [ 472.075308] kasan_check_range+0x2c3/0x2e0 [ 472.075308] mutex_lock+0x68/0xc0 [ 472.075308] l2cap_chan_timeout+0x181/0x300 [ 472.075308] process_one_work+0x5d2/0xe00 [ 472.075308] worker_thread+0xe1d/0x1660 [ 472.075308] ? pr_cont_work+0x5e0/0x5e0 [ 472.075308] kthread+0x2b7/0x350 [ 472.075308] ? pr_cont_work+0x5e0/0x5e0 [ 472.075308] ? kthread_blkcg+0xd0/0xd0 [ 472.075308] ret_from_fork+0x4d/0x80 [ 472.075308] ? kthread_blkcg+0xd0/0xd0 [ 472.075308] ret_from_fork_asm+0x11/0x20 [ 472.075308] </TASK> [ 472.075308] ================================================================== [ 472.094860] Disabling lock debugging due to kernel taint [ 472.096136] BUG: kernel NULL pointer dereference, address: 0000000000000158 [ 472.096136] #PF: supervisor write access in kernel mode [ 472.096136] #PF: error_code(0x0002) - not-present page [ 472.096136] PGD 0 P4D 0 [ 472.096136] Oops: 0002 [#1] PREEMPT SMP KASAN NOPTI [ 472.096136] CPU: 0 PID: 7 Comm: kworker/0:0 Tainted: G B 6.9.0-rc5-00356-g78c0094a146b #36 [ 472.096136] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu4 [ 472.096136] Workqueue: events l2cap_chan_timeout [ 472.096136] RIP: 0010:mutex_lock+0x88/0xc0 [ 472.096136] Code: be 08 00 00 00 e8 f8 23 1f fd 4c 89 f7 be 08 00 00 00 e8 eb 23 1f fd 42 80 3c 23 00 74 08 48 88 [ 472.096136] RSP: 0018:ffff88800744fc78 EFLAGS: 00000246 [ 472.096136] RAX: 0000000000000000 RBX: 1ffff11000e89f8f RCX: ffffffff8457c865 [ 472.096136] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88800744fc78 [ 472.096136] RBP: 0000000000000158 R08: ffff88800744fc7f R09: 1ffff11000e89f8f [ 472.096136] R10: dffffc0000000000 R11: ffffed1000e89f90 R12: dffffc0000000000 [ 472.096136] R13: 0000000000000158 R14: ffff88800744fc78 R15: ffff888007405a00 [ 472.096136] FS: 0000000000000000(0000) GS:ffff88806d200000(0000) knlGS:0000000000000000 [ 472.096136] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 472.096136] CR2: 0000000000000158 CR3: 000000000da32000 CR4: 00000000000006f0 [ 472.096136] Call Trace: [ 472.096136] <TASK> [ 472.096136] ? __die_body+0x8d/0xe0 [ 472.096136] ? page_fault_oops+0x6b8/0x9a0 [ 472.096136] ? kernelmode_fixup_or_oops+0x20c/0x2a0 [ 472.096136] ? do_user_addr_fault+0x1027/0x1340 [ 472.096136] ? _printk+0x7a/0xa0 [ 472.096136] ? mutex_lock+0x68/0xc0 [ 472.096136] ? add_taint+0x42/0xd0 [ 472.096136] ? exc_page_fault+0x6a/0x1b0 [ 472.096136] ? asm_exc_page_fault+0x26/0x30 [ 472.096136] ? mutex_lock+0x75/0xc0 [ 472.096136] ? mutex_lock+0x88/0xc0 [ 472.096136] ? mutex_lock+0x75/0xc0 [ 472.096136] l2cap_chan_timeo ---truncated--- |
| CVE-2024-34397 | Medium | 2024-05-07 | Outside Waratek scope | No public exploit | An issue was discovered in GNOME GLib before 2.78.5, and 2.79.x and 2.80.x before 2.80.1. When a GDBus-based client subscribes to signals from a trusted system service such as NetworkManager on a shared computer, other users of the same computer can send spoofed D-Bus signals that the GDBus-based client will wrongly interpret as having been sent by the trusted system service. This could lead to the GDBus-based client behaving incorrectly, with an application-dependent impact. |
| CVE-2024-34064 | Medium | 2024-05-06 | Not applicable | No public exploit | Jinja is an extensible templating engine. The `xmlattr` filter in affected versions of Jinja accepts keys containing non-attribute characters. XML/HTML attributes cannot contain spaces, `/`, `>`, or `=`, as each would then be interpreted as starting a separate attribute. If an application accepts keys (as opposed to only values) as user input, and renders these in pages that other users see as well, an attacker could use this to inject other attributes and perform XSS. The fix for CVE-2024-22195 only addressed spaces but not other characters. Accepting keys as user input is now explicitly considered an unintended use case of the `xmlattr` filter, and code that does so without otherwise validating the input should be flagged as insecure, regardless of Jinja version. Accepting _values_ as user input continues to be safe. This vulnerability is fixed in 3.1.4. |
| CVE-2024-34500 | Medium | 2024-05-05 | Not applicable | No public exploit | An issue was discovered in the UnlinkedWikibase extension in MediaWiki before 1.39.6, 1.40.x before 1.40.2, and 1.41.x before 1.41.1. XSS can occur through an interface message. Error messages (in the $err var) are not escaped before being passed to Html::rawElement() in the getError() function in the Hooks class. |
| CVE-2024-34403 | Medium | 2024-05-03 | Not applicable | No public exploit | An issue was discovered in uriparser through 0.9.7. ComposeQueryMallocExMm in UriQuery.c has an integer overflow via a long string. |
| CVE-2024-4059 | Medium | 2024-05-01 | Not applicable | No public exploit | Out of bounds read in V8 API in Google Chrome prior to 124.0.6367.78 allowed a remote attacker to leak cross-site data via a crafted HTML page. (Chromium security severity: High) |
| CVE-2024-27015 | Medium | 2024-05-01 | Not applicable | No public exploit | In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: incorrect pppoe tuple pppoe traffic reaching ingress path does not match the flowtable entry because the pppoe header is expected to be at the network header offset. This bug causes a mismatch in the flow table lookup, so pppoe packets enter the classical forwarding path. |
| CVE-2024-27014 | Medium | 2024-05-01 | Not applicable | No public exploit | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Prevent deadlock while disabling aRFS When disabling aRFS under the `priv->state_lock`, any scheduled aRFS works are canceled using the `cancel_work_sync` function, which waits for the work to end if it has already started. However, while waiting for the work handler, the handler will try to acquire the `state_lock` which is already acquired. The worker acquires the lock to delete the rules if the state is down, which is not the worker's responsibility since disabling aRFS deletes the rules. Add an aRFS state variable, which indicates whether the aRFS is enabled and prevent adding rules when the aRFS is disabled. Kernel log: ====================================================== WARNING: possible circular locking dependency detected 6.7.0-rc4_net_next_mlx5_5483eb2 #1 Tainted: G I ------------------------------------------------------ ethtool/386089 is trying to acquire lock: ffff88810f21ce68 ((work_completion)(&rule->arfs_work)){+.+.}-{0:0}, at: __flush_work+0x74/0x4e0 but task is already holding lock: ffff8884a1808cc0 (&priv->state_lock){+.+.}-{3:3}, at: mlx5e_ethtool_set_channels+0x53/0x200 [mlx5_core] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&priv->state_lock){+.+.}-{3:3}: __mutex_lock+0x80/0xc90 arfs_handle_work+0x4b/0x3b0 [mlx5_core] process_one_work+0x1dc/0x4a0 worker_thread+0x1bf/0x3c0 kthread+0xd7/0x100 ret_from_fork+0x2d/0x50 ret_from_fork_asm+0x11/0x20 -> #0 ((work_completion)(&rule->arfs_work)){+.+.}-{0:0}: __lock_acquire+0x17b4/0x2c80 lock_acquire+0xd0/0x2b0 __flush_work+0x7a/0x4e0 __cancel_work_timer+0x131/0x1c0 arfs_del_rules+0x143/0x1e0 [mlx5_core] mlx5e_arfs_disable+0x1b/0x30 [mlx5_core] mlx5e_ethtool_set_channels+0xcb/0x200 [mlx5_core] ethnl_set_channels+0x28f/0x3b0 ethnl_default_set_doit+0xec/0x240 genl_family_rcv_msg_doit+0xd0/0x120 genl_rcv_msg+0x188/0x2c0 netlink_rcv_skb+0x54/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x1a1/0x270 netlink_sendmsg+0x214/0x460 __sock_sendmsg+0x38/0x60 __sys_sendto+0x113/0x170 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x40/0xe0 entry_SYSCALL_64_after_hwframe+0x46/0x4e other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&priv->state_lock); lock((work_completion)(&rule->arfs_work)); lock(&priv->state_lock); lock((work_completion)(&rule->arfs_work)); *** DEADLOCK *** 3 locks held by ethtool/386089: #0: ffffffff82ea7210 (cb_lock){++++}-{3:3}, at: genl_rcv+0x15/0x40 #1: ffffffff82e94c88 (rtnl_mutex){+.+.}-{3:3}, at: ethnl_default_set_doit+0xd3/0x240 #2: ffff8884a1808cc0 (&priv->state_lock){+.+.}-{3:3}, at: mlx5e_ethtool_set_channels+0x53/0x200 [mlx5_core] stack backtrace: CPU: 15 PID: 386089 Comm: ethtool Tainted: G I 6.7.0-rc4_net_next_mlx5_5483eb2 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x60/0xa0 check_noncircular+0x144/0x160 __lock_acquire+0x17b4/0x2c80 lock_acquire+0xd0/0x2b0 ? __flush_work+0x74/0x4e0 ? save_trace+0x3e/0x360 ? __flush_work+0x74/0x4e0 __flush_work+0x7a/0x4e0 ? __flush_work+0x74/0x4e0 ? __lock_acquire+0xa78/0x2c80 ? lock_acquire+0xd0/0x2b0 ? mark_held_locks+0x49/0x70 __cancel_work_timer+0x131/0x1c0 ? mark_held_locks+0x49/0x70 arfs_del_rules+0x143/0x1e0 [mlx5_core] mlx5e_arfs_disable+0x1b/0x30 [mlx5_core] mlx5e_ethtool_set_channels+0xcb/0x200 [mlx5_core] ethnl_set_channels+0x28f/0x3b0 ethnl_default_set_doit+0xec/0x240 genl_family_rcv_msg_doit+0xd0/0x120 genl_rcv_msg+0x188/0x2c0 ? ethn ---truncated--- |
| CVE-2024-27013 | Medium | 2024-05-01 | Not applicable | No public exploit | In the Linux kernel, the following vulnerability has been resolved: tun: limit printing rate when illegal packet received by tun dev vhost_worker will call tun call backs to receive packets. If too many illegal packets arrives, tun_do_read will keep dumping packet contents. When console is enabled, it will costs much more cpu time to dump packet and soft lockup will be detected. net_ratelimit mechanism can be used to limit the dumping rate. PID: 33036 TASK: ffff949da6f20000 CPU: 23 COMMAND: "vhost-32980" #0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253 #1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3 #2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e #3 [fffffe00003fced0] do_nmi at ffffffff8922660d #4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663 [exception RIP: io_serial_in+20] RIP: ffffffff89792594 RSP: ffffa655314979e8 RFLAGS: 00000002 RAX: ffffffff89792500 RBX: ffffffff8af428a0 RCX: 0000000000000000 RDX: 00000000000003fd RSI: 0000000000000005 RDI: ffffffff8af428a0 RBP: 0000000000002710 R8: 0000000000000004 R9: 000000000000000f R10: 0000000000000000 R11: ffffffff8acbf64f R12: 0000000000000020 R13: ffffffff8acbf698 R14: 0000000000000058 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #5 [ffffa655314979e8] io_serial_in at ffffffff89792594 #6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470 #7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6 #8 [ffffa65531497a20] uart_console_write at ffffffff8978b605 #9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558 #10 [ffffa65531497ac8] console_unlock at ffffffff89316124 #11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07 #12 [ffffa65531497b68] printk at ffffffff89318306 #13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765 #14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun] #15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun] #16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net] #17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost] #18 [ffffa65531497f10] kthread at ffffffff892d2e72 #19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f |
| CVE-2024-27004 | Medium | 2024-05-01 | Not applicable | No public exploit | In the Linux kernel, the following vulnerability has been resolved: clk: Get runtime PM before walking tree during disable_unused Doug reported [1] the following hung task: INFO: task swapper/0:1 blocked for more than 122 seconds. Not tainted 5.15.149-21875-gf795ebc40eb8 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:swapper/0 state:D stack: 0 pid: 1 ppid: 0 flags:0x00000008 Call trace: __switch_to+0xf4/0x1f4 __schedule+0x418/0xb80 schedule+0x5c/0x10c rpm_resume+0xe0/0x52c rpm_resume+0x178/0x52c __pm_runtime_resume+0x58/0x98 clk_pm_runtime_get+0x30/0xb0 clk_disable_unused_subtree+0x58/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused+0x4c/0xe4 do_one_initcall+0xcc/0x2d8 do_initcall_level+0xa4/0x148 do_initcalls+0x5c/0x9c do_basic_setup+0x24/0x30 kernel_init_freeable+0xec/0x164 kernel_init+0x28/0x120 ret_from_fork+0x10/0x20 INFO: task kworker/u16:0:9 blocked for more than 122 seconds. Not tainted 5.15.149-21875-gf795ebc40eb8 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u16:0 state:D stack: 0 pid: 9 ppid: 2 flags:0x00000008 Workqueue: events_unbound deferred_probe_work_func Call trace: __switch_to+0xf4/0x1f4 __schedule+0x418/0xb80 schedule+0x5c/0x10c schedule_preempt_disabled+0x2c/0x48 __mutex_lock+0x238/0x488 __mutex_lock_slowpath+0x1c/0x28 mutex_lock+0x50/0x74 clk_prepare_lock+0x7c/0x9c clk_core_prepare_lock+0x20/0x44 clk_prepare+0x24/0x30 clk_bulk_prepare+0x40/0xb0 mdss_runtime_resume+0x54/0x1c8 pm_generic_runtime_resume+0x30/0x44 __genpd_runtime_resume+0x68/0x7c genpd_runtime_resume+0x108/0x1f4 __rpm_callback+0x84/0x144 rpm_callback+0x30/0x88 rpm_resume+0x1f4/0x52c rpm_resume+0x178/0x52c __pm_runtime_resume+0x58/0x98 __device_attach+0xe0/0x170 device_initial_probe+0x1c/0x28 bus_probe_device+0x3c/0x9c device_add+0x644/0x814 mipi_dsi_device_register_full+0xe4/0x170 devm_mipi_dsi_device_register_full+0x28/0x70 ti_sn_bridge_probe+0x1dc/0x2c0 auxiliary_bus_probe+0x4c/0x94 really_probe+0xcc/0x2c8 __driver_probe_device+0xa8/0x130 driver_probe_device+0x48/0x110 __device_attach_driver+0xa4/0xcc bus_for_each_drv+0x8c/0xd8 __device_attach+0xf8/0x170 device_initial_probe+0x1c/0x28 bus_probe_device+0x3c/0x9c deferred_probe_work_func+0x9c/0xd8 process_one_work+0x148/0x518 worker_thread+0x138/0x350 kthread+0x138/0x1e0 ret_from_fork+0x10/0x20 The first thread is walking the clk tree and calling clk_pm_runtime_get() to power on devices required to read the clk hardware via struct clk_ops::is_enabled(). This thread holds the clk prepare_lock, and is trying to runtime PM resume a device, when it finds that the device is in the process of resuming so the thread schedule()s away waiting for the device to finish resuming before continuing. The second thread is runtime PM resuming the same device, but the runtime resume callback is calling clk_prepare(), trying to grab the prepare_lock waiting on the first thread. This is a classic ABBA deadlock. To properly fix the deadlock, we must never runtime PM resume or suspend a device with the clk prepare_lock held. Actually doing that is near impossible today because the global prepare_lock would have to be dropped in the middle of the tree, the device runtime PM resumed/suspended, and then the prepare_lock grabbed again to ensure consistency of the clk tree topology. If anything changes with the clk tree in the meantime, we've lost and will need to start the operation all over again. Luckily, most of the time we're simply incrementing or decrementing the runtime PM count on an active device, so we don't have the chance to schedule away with the prepare_lock held. Let's fix this immediate problem that can be ---truncated--- |
| CVE-2024-27001 | Medium | 2024-05-01 | Not applicable | No public exploit | In the Linux kernel, the following vulnerability has been resolved: comedi: vmk80xx: fix incomplete endpoint checking While vmk80xx does have endpoint checking implemented, some things can fall through the cracks. Depending on the hardware model, URBs can have either bulk or interrupt type, and current version of vmk80xx_find_usb_endpoints() function does not take that fully into account. While this warning does not seem to be too harmful, at the very least it will crash systems with 'panic_on_warn' set on them. Fix the issue found by Syzkaller [1] by somewhat simplifying the endpoint checking process with usb_find_common_endpoints() and ensuring that only expected endpoint types are present. This patch has not been tested on real hardware. [1] Syzkaller report: usb 1-1: BOGUS urb xfer, pipe 1 != type 3 WARNING: CPU: 0 PID: 781 at drivers/usb/core/urb.c:504 usb_submit_urb+0xc4e/0x18c0 drivers/usb/core/urb.c:503 ... Call Trace: <TASK> usb_start_wait_urb+0x113/0x520 drivers/usb/core/message.c:59 vmk80xx_reset_device drivers/comedi/drivers/vmk80xx.c:227 [inline] vmk80xx_auto_attach+0xa1c/0x1a40 drivers/comedi/drivers/vmk80xx.c:818 comedi_auto_config+0x238/0x380 drivers/comedi/drivers.c:1067 usb_probe_interface+0x5cd/0xb00 drivers/usb/core/driver.c:399 ... Similar issue also found by Syzkaller: |
| CVE-2024-26987 | Medium | 2024-05-01 | Not applicable | Exploited | In the Linux kernel, the following vulnerability has been resolved: mm/memory-failure: fix deadlock when hugetlb_optimize_vmemmap is enabled When I did hard offline test with hugetlb pages, below deadlock occurs: ====================================================== WARNING: possible circular locking dependency detected 6.8.0-11409-gf6cef5f8c37f #1 Not tainted ------------------------------------------------------ bash/46904 is trying to acquire lock: ffffffffabe68910 (cpu_hotplug_lock){++++}-{0:0}, at: static_key_slow_dec+0x16/0x60 but task is already holding lock: ffffffffabf92ea8 (pcp_batch_high_lock){+.+.}-{3:3}, at: zone_pcp_disable+0x16/0x40 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (pcp_batch_high_lock){+.+.}-{3:3}: __mutex_lock+0x6c/0x770 page_alloc_cpu_online+0x3c/0x70 cpuhp_invoke_callback+0x397/0x5f0 __cpuhp_invoke_callback_range+0x71/0xe0 _cpu_up+0xeb/0x210 cpu_up+0x91/0xe0 cpuhp_bringup_mask+0x49/0xb0 bringup_nonboot_cpus+0xb7/0xe0 smp_init+0x25/0xa0 kernel_init_freeable+0x15f/0x3e0 kernel_init+0x15/0x1b0 ret_from_fork+0x2f/0x50 ret_from_fork_asm+0x1a/0x30 -> #0 (cpu_hotplug_lock){++++}-{0:0}: __lock_acquire+0x1298/0x1cd0 lock_acquire+0xc0/0x2b0 cpus_read_lock+0x2a/0xc0 static_key_slow_dec+0x16/0x60 __hugetlb_vmemmap_restore_folio+0x1b9/0x200 dissolve_free_huge_page+0x211/0x260 __page_handle_poison+0x45/0xc0 memory_failure+0x65e/0xc70 hard_offline_page_store+0x55/0xa0 kernfs_fop_write_iter+0x12c/0x1d0 vfs_write+0x387/0x550 ksys_write+0x64/0xe0 do_syscall_64+0xca/0x1e0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(pcp_batch_high_lock); lock(cpu_hotplug_lock); lock(pcp_batch_high_lock); rlock(cpu_hotplug_lock); *** DEADLOCK *** 5 locks held by bash/46904: #0: ffff98f6c3bb23f0 (sb_writers#5){.+.+}-{0:0}, at: ksys_write+0x64/0xe0 #1: ffff98f6c328e488 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0xf8/0x1d0 #2: ffff98ef83b31890 (kn->active#113){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x100/0x1d0 #3: ffffffffabf9db48 (mf_mutex){+.+.}-{3:3}, at: memory_failure+0x44/0xc70 #4: ffffffffabf92ea8 (pcp_batch_high_lock){+.+.}-{3:3}, at: zone_pcp_disable+0x16/0x40 stack backtrace: CPU: 10 PID: 46904 Comm: bash Kdump: loaded Not tainted 6.8.0-11409-gf6cef5f8c37f #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x68/0xa0 check_noncircular+0x129/0x140 __lock_acquire+0x1298/0x1cd0 lock_acquire+0xc0/0x2b0 cpus_read_lock+0x2a/0xc0 static_key_slow_dec+0x16/0x60 __hugetlb_vmemmap_restore_folio+0x1b9/0x200 dissolve_free_huge_page+0x211/0x260 __page_handle_poison+0x45/0xc0 memory_failure+0x65e/0xc70 hard_offline_page_store+0x55/0xa0 kernfs_fop_write_iter+0x12c/0x1d0 vfs_write+0x387/0x550 ksys_write+0x64/0xe0 do_syscall_64+0xca/0x1e0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 RIP: 0033:0x7fc862314887 Code: 10 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 RSP: 002b:00007fff19311268 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007fc862314887 RDX: 000000000000000c RSI: 000056405645fe10 RDI: 0000000000000001 RBP: 000056405645fe10 R08: 00007fc8623d1460 R09: 000000007fffffff R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000000c R13: 00007fc86241b780 R14: 00007fc862417600 R15: 00007fc862416a00 In short, below scene breaks the ---truncated--- |
| CVE-2024-26986 | Medium | 2024-05-01 | Not applicable | No public exploit | In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix memory leak in create_process failure Fix memory leak due to a leaked mmget reference on an error handling code path that is triggered when attempting to create KFD processes while a GPU reset is in progress. |
| CVE-2024-25569 | Medium | 2024-04-25 | Not applicable | Proof of concept only | An out-of-bounds read vulnerability exists in the RAWCodec::DecodeBytes functionality of Mathieu Malaterre Grassroot DICOM 3.0.23. A specially crafted DICOM file can lead to an out-of-bounds read. An attacker can provide a malicious file to trigger this vulnerability. |
| CVE-2024-31208 | Medium | 2024-04-23 | Not applicable | No public exploit | Synapse is an open-source Matrix homeserver. A remote Matrix user with malicious intent, sharing a room with Synapse instances before 1.105.1, can dispatch specially crafted events to exploit a weakness in the V2 state resolution algorithm. This can induce high CPU consumption and accumulate excessive data in the database of such instances, resulting in a denial of service. Servers in private federations, or those that do not federate, are not affected. Server administrators should upgrade to 1.105.1 or later. Some workarounds are available. One can ban the malicious users or ACL block servers from the rooms and/or leave the room and purge the room using the admin API. |
| CVE-2023-51797 | Medium | 2024-04-19 | Not applicable | No public exploit | Buffer Overflow vulnerability in Ffmpeg v.N113007-g8d24a28d06 allows a local attacker to execute arbitrary code via the libavfilter/avf_showwaves.c:722:24 in showwaves_filter_frame |
| CVE-2023-50007 | Medium | 2024-04-19 | Not applicable | No public exploit | FFmpeg v.n6.1-3-g466799d4f5 allows an attacker to trigger use of a parameter of negative size in the av_samples_set_silence function in thelibavutil/samplefmt.c:260:9 component. |
| CVE-2024-27306 | Medium | 2024-04-18 | Not applicable | No public exploit | aiohttp is an asynchronous HTTP client/server framework for asyncio and Python. A XSS vulnerability exists on index pages for static file handling. This vulnerability is fixed in 3.9.4. We have always recommended using a reverse proxy server (e.g. nginx) for serving static files. Users following the recommendation are unaffected. Other users can disable `show_index` if unable to upgrade. |
| CVE-2024-3846 | Medium | 2024-04-17 | Not applicable | No public exploit | Inappropriate implementation in Prompts in Google Chrome prior to 124.0.6367.60 allowed a remote attacker who convinced a user to engage in specific UI gestures to perform UI spoofing via a crafted HTML page. (Chromium security severity: Low) |
| CVE-2024-3844 | Medium | 2024-04-17 | Not applicable | Proof of concept only | Inappropriate implementation in Extensions in Google Chrome prior to 124.0.6367.60 allowed a remote attacker to perform UI spoofing via a crafted Chrome Extension. (Chromium security severity: Low) |
| CVE-2024-3843 | Medium | 2024-04-17 | Not applicable | No public exploit | Insufficient data validation in Downloads in Google Chrome prior to 124.0.6367.60 allowed a remote attacker to perform UI spoofing via a crafted HTML page. (Chromium security severity: Medium) |
| CVE-2024-31585 | Medium | 2024-04-17 | Not applicable | No public exploit | FFmpeg version n5.1 to n6.1 was discovered to contain an Off-by-one Error vulnerability in libavfilter/avf_showspectrum.c. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input. |
| CVE-2024-21096 | Medium | 2024-04-16 | Outside Waratek scope | No public exploit | Vulnerability in the MySQL Server product of Oracle MySQL (component: Client: mysqldump). Supported versions that are affected are 8.0.36 and prior and 8.3.0 and prior. Difficult to exploit vulnerability allows unauthenticated attacker with logon to the infrastructure where MySQL Server executes to compromise MySQL Server. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of MySQL Server accessible data as well as unauthorized read access to a subset of MySQL Server accessible data and unauthorized ability to cause a partial denial of service (partial DOS) of MySQL Server. CVSS 3.1 Base Score 4.9 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:H/PR:N/UI:N/S:U/C:L/I:L/A:L). |
| CVE-2022-24809 | Medium | 2024-04-16 | Not applicable | No public exploit | net-snmp provides various tools relating to the Simple Network Management Protocol. Prior to version 5.9.2, a user with read-only credentials can use a malformed OID in a `GET-NEXT` to the `nsVacmAccessTable` to cause a NULL pointer dereference. Version 5.9.2 contains a patch. Users should use strong SNMPv3 credentials and avoid sharing the credentials. Those who must use SNMPv1 or SNMPv2c should use a complex community string and enhance the protection by restricting access to a given IP address range. |
| CVE-2022-24808 | Medium | 2024-04-16 | Not applicable | No public exploit | net-snmp provides various tools relating to the Simple Network Management Protocol. Prior to version 5.9.2, a user with read-write credentials can use a malformed OID in a `SET` request to `NET-SNMP-AGENT-MIB::nsLogTable` to cause a NULL pointer dereference. Version 5.9.2 contains a patch. Users should use strong SNMPv3 credentials and avoid sharing the credentials. Those who must use SNMPv1 or SNMPv2c should use a complex community string and enhance the protection by restricting access to a given IP address range. |
| CVE-2022-24807 | Medium | 2024-04-16 | Not applicable | No public exploit | net-snmp provides various tools relating to the Simple Network Management Protocol. Prior to version 5.9.2, a malformed OID in a SET request to `SNMP-VIEW-BASED-ACM-MIB::vacmAccessTable` can cause an out-of-bounds memory access. A user with read-write credentials can exploit the issue. Version 5.9.2 contains a patch. Users should use strong SNMPv3 credentials and avoid sharing the credentials. Those who must use SNMPv1 or SNMPv2c should use a complex community string and enhance the protection by restricting access to a given IP address range. |
| CVE-2022-24806 | Medium | 2024-04-16 | Not applicable | No public exploit | net-snmp provides various tools relating to the Simple Network Management Protocol. Prior to version 5.9.2, a user with read-write credentials can exploit an Improper Input Validation vulnerability when SETing malformed OIDs in master agent and subagent simultaneously. Version 5.9.2 contains a patch. Users should use strong SNMPv3 credentials and avoid sharing the credentials. Those who must use SNMPv1 or SNMPv2c should use a complex community string and enhance the protection by restricting access to a given IP address range. |
| CVE-2024-31497 | Medium | 2024-04-15 | Not applicable | Proof of concept only | In PuTTY 0.68 through 0.80 before 0.81, biased ECDSA nonce generation allows an attacker to recover a user's NIST P-521 secret key via a quick attack in approximately 60 signatures. This is especially important in a scenario where an adversary is able to read messages signed by PuTTY or Pageant. The required set of signed messages may be publicly readable because they are stored in a public Git service that supports use of SSH for commit signing, and the signatures were made by Pageant through an agent-forwarding mechanism. In other words, an adversary may already have enough signature information to compromise a victim's private key, even if there is no further use of vulnerable PuTTY versions. After a key compromise, an adversary may be able to conduct supply-chain attacks on software maintained in Git. A second, independent scenario is that the adversary is an operator of an SSH server to which the victim authenticates (for remote login or file copy), even though this server is not fully trusted by the victim, and the victim uses the same private key for SSH connections to other services operated by other entities. Here, the rogue server operator (who would otherwise have no way to determine the victim's private key) can derive the victim's private key, and then use it for unauthorized access to those other services. If the other services include Git services, then again it may be possible to conduct supply-chain attacks on software maintained in Git. This also affects, for example, FileZilla before 3.67.0, WinSCP before 6.3.3, TortoiseGit before 2.15.0.1, and TortoiseSVN through 1.14.6. |
| CVE-2024-3515 | Medium | 2024-04-10 | Not applicable | No public exploit | Use after free in Dawn in Google Chrome prior to 123.0.6312.122 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High) |
| CVE-2024-30260 | Medium | 2024-04-04 | Not applicable | No public exploit | Undici is an HTTP/1.1 client, written from scratch for Node.js. Undici cleared Authorization and Proxy-Authorization headers for `fetch()`, but did not clear them for `undici.request()`. This vulnerability was patched in version(s) 5.28.4 and 6.11.1. |
| CVE-2024-28182 | Medium | 2024-04-04 | Not applicable | Forecast only | nghttp2 is an implementation of the Hypertext Transfer Protocol version 2 in C. The nghttp2 library prior to version 1.61.0 keeps reading the unbounded number of HTTP/2 CONTINUATION frames even after a stream is reset to keep HPACK context in sync. This causes excessive CPU usage to decode HPACK stream. nghttp2 v1.61.0 mitigates this vulnerability by limiting the number of CONTINUATION frames it accepts per stream. There is no workaround for this vulnerability. |
| CVE-2024-24795 | Medium | 2024-04-04 | Outside Waratek scope | No public exploit | HTTP Response splitting in multiple modules in Apache HTTP Server allows an attacker that can inject malicious response headers into backend applications to cause an HTTP desynchronization attack. Users are recommended to upgrade to version 2.4.59, which fixes this issue. |
| CVE-2024-29133 | Medium | 2024-03-21 | No exploit published | No public exploit | Out-of-bounds Write vulnerability in Apache Commons Configuration.This issue affects Apache Commons Configuration: from 2.0 before 2.10.1. Users are recommended to upgrade to version 2.10.1, which fixes the issue. |
| CVE-2024-2631 | Medium | 2024-03-20 | Not applicable | No public exploit | Inappropriate implementation in iOS in Google Chrome prior to 123.0.6312.58 allowed a remote attacker to perform UI spoofing via a crafted HTML page. (Chromium security severity: Low) |
| CVE-2024-2630 | Medium | 2024-03-20 | Not applicable | No public exploit | Inappropriate implementation in iOS in Google Chrome prior to 123.0.6312.58 allowed a remote attacker to leak cross-origin data via a crafted HTML page. (Chromium security severity: Medium) |
| CVE-2024-2629 | Medium | 2024-03-20 | Not applicable | No public exploit | Incorrect security UI in iOS in Google Chrome prior to 123.0.6312.58 allowed a remote attacker to perform UI spoofing via a crafted HTML page. (Chromium security severity: Medium) |
| CVE-2024-2628 | Medium | 2024-03-20 | Not applicable | Proof of concept only | Inappropriate implementation in Downloads in Google Chrome prior to 123.0.6312.58 allowed a remote attacker to perform UI spoofing via a crafted URL. (Chromium security severity: Medium) |
| CVE-2024-2626 | Medium | 2024-03-20 | Not applicable | No public exploit | Out of bounds read in Swiftshader in Google Chrome prior to 123.0.6312.58 allowed a remote attacker to perform out of bounds memory access via a crafted HTML page. (Chromium security severity: Medium) |
| CVE-2023-46841 | Medium | 2024-03-20 | Not applicable | No public exploit | Recent x86 CPUs offer functionality named Control-flow Enforcement Technology (CET). A sub-feature of this are Shadow Stacks (CET-SS). CET-SS is a hardware feature designed to protect against Return Oriented Programming attacks. When enabled, traditional stacks holding both data and return addresses are accompanied by so called "shadow stacks", holding little more than return addresses. Shadow stacks aren't writable by normal instructions, and upon function returns their contents are used to check for possible manipulation of a return address coming from the traditional stack. In particular certain memory accesses need intercepting by Xen. In various cases the necessary emulation involves kind of replaying of the instruction. Such replaying typically involves filling and then invoking of a stub. Such a replayed instruction may raise an exceptions, which is expected and dealt with accordingly. Unfortunately the interaction of both of the above wasn't right: Recovery involves removal of a call frame from the (traditional) stack. The counterpart of this operation for the shadow stack was missing. |
| CVE-2023-46840 | Medium | 2024-03-20 | Not applicable | No public exploit | Incorrect placement of a preprocessor directive in source code results in logic that doesn't operate as intended when support for HVM guests is compiled out of Xen. |
| CVE-2023-46839 | Medium | 2024-03-20 | Not applicable | No public exploit | PCI devices can make use of a functionality called phantom functions, that when enabled allows the device to generate requests using the IDs of functions that are otherwise unpopulated. This allows a device to extend the number of outstanding requests. Such phantom functions need an IOMMU context setup, but failure to setup the context is not fatal when the device is assigned. Not failing device assignment when such failure happens can lead to the primary device being assigned to a guest, while some of the phantom functions are assigned to a different domain. |
| CVE-2024-23672 | Medium | 2024-03-13 | No exploit published | No public exploit | Denial of Service via incomplete cleanup vulnerability in Apache Tomcat. It was possible for WebSocket clients to keep WebSocket connections open leading to increased resource consumption.This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.0-M16, from 10.1.0-M1 through 10.1.18, from 9.0.0-M1 through 9.0.85, from 8.5.0 through 8.5.98. Older, EOL versions may also be affected. Users are recommended to upgrade to version 11.0.0-M17, 10.1.19, 9.0.86 or 8.5.99 which fix the issue. |
| CVE-2023-43279 | Medium | 2024-03-12 | Not applicable | No public exploit | Null Pointer Dereference in mask_cidr6 component at cidr.c in Tcpreplay 4.4.4 allows attackers to crash the application via crafted tcprewrite command. |
| CVE-2024-28180 | Medium | 2024-03-09 | Not applicable | No public exploit | Package jose aims to provide an implementation of the Javascript Object Signing and Encryption set of standards. An attacker could send a JWE containing compressed data that used large amounts of memory and CPU when decompressed by Decrypt or DecryptMulti. Those functions now return an error if the decompressed data would exceed 250kB or 10x the compressed size (whichever is larger). This vulnerability has been patched in versions 4.0.1, 3.0.3 and 2.6.3. |
| CVE-2024-28176 | Medium | 2024-03-09 | Not applicable | No public exploit | jose is JavaScript module for JSON Object Signing and Encryption, providing support for JSON Web Tokens (JWT), JSON Web Signature (JWS), JSON Web Encryption (JWE), JSON Web Key (JWK), JSON Web Key Set (JWKS), and more. A vulnerability has been identified in the JSON Web Encryption (JWE) decryption interfaces, specifically related to the support for decompressing plaintext after its decryption. Under certain conditions it is possible to have the user's environment consume unreasonable amount of CPU time or memory during JWE Decryption operations. This issue has been patched in versions 2.0.7 and 4.15.5. |
| CVE-2024-23284 | Medium | 2024-03-08 | Not applicable | No public exploit | A logic issue was addressed with improved state management. This issue is fixed in Safari 17.4, iOS 16.7.6 and iPadOS 16.7.6, iOS 17.4 and iPadOS 17.4, macOS Sonoma 14.4, tvOS 17.4, visionOS 1.1, watchOS 10.4. Processing maliciously crafted web content may prevent Content Security Policy from being enforced. |
| CVE-2024-23254 | Medium | 2024-03-08 | Not applicable | No public exploit | The issue was addressed with improved UI handling. This issue is fixed in Safari 17.4, iOS 17.4 and iPadOS 17.4, macOS Sonoma 14.4, tvOS 17.4, visionOS 1.1, watchOS 10.4. A malicious website may exfiltrate audio data cross-origin. |
| CVE-2024-24246 | Medium | 2024-02-29 | Not applicable | Proof of concept only | Heap Buffer Overflow vulnerability in qpdf 11.9.0 allows attackers to crash the application via the std::__shared_count() function at /bits/shared_ptr_base.h. |
| CVE-2024-27285 | Medium | 2024-02-28 | Not applicable | Proof of concept only | YARD is a Ruby Documentation tool. The "frames.html" file within the Yard Doc's generated documentation is vulnerable to Cross-Site Scripting (XSS) attacks due to inadequate sanitization of user input within the JavaScript segment of the "frames.erb" template file. This vulnerability is fixed in 0.9.36. |
| CVE-2024-25082 | Medium | 2024-02-26 | Not applicable | No public exploit | Splinefont in FontForge through 20230101 allows command injection via crafted archives or compressed files. |
| CVE-2024-25081 | Medium | 2024-02-26 | Not applicable | No public exploit | Splinefont in FontForge through 20230101 allows command injection via crafted filenames. |
| CVE-2024-24568 | Medium | 2024-02-26 | Not applicable | No public exploit | Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to 7.0.3, the rules inspecting HTTP2 headers can get bypassed by crafted traffic. The vulnerability has been patched in 7.0.3. |
| CVE-2024-21501 | Medium | 2024-02-24 | Not applicable | Proof of concept only | Versions of the package sanitize-html before 2.12.1 are vulnerable to Information Exposure when used on the backend and with the style attribute allowed, allowing enumeration of files in the system (including project dependencies). An attacker could exploit this vulnerability to gather details about the file system structure and dependencies of the targeted server. |
| CVE-2024-25629 | Medium | 2024-02-23 | Not applicable | No public exploit | c-ares is a C library for asynchronous DNS requests. `ares__read_line()` is used to parse local configuration files such as `/etc/resolv.conf`, `/etc/nsswitch.conf`, the `HOSTALIASES` file, and if using a c-ares version prior to 1.27.0, the `/etc/hosts` file. If any of these configuration files has an embedded `NULL` character as the first character in a new line, it can lead to attempting to read memory prior to the start of the given buffer which may result in a crash. This issue is fixed in c-ares 1.27.0. No known workarounds exist. |
| CVE-2023-52160 | Medium | 2024-02-22 | Not applicable | Proof of concept only | The implementation of PEAP in wpa_supplicant through 2.10 allows authentication bypass. For a successful attack, wpa_supplicant must be configured to not verify the network's TLS certificate during Phase 1 authentication, and an eap_peap_decrypt vulnerability can then be abused to skip Phase 2 authentication. The attack vector is sending an EAP-TLV Success packet instead of starting Phase 2. This allows an adversary to impersonate Enterprise Wi-Fi networks. |
| CVE-2024-25983 | Medium | 2024-02-19 | Not applicable | No public exploit | Insufficient checks in a web service made it possible to add comments to the comments block on another user's dashboard when it was not otherwise available (e.g., on their profile page). |
| CVE-2024-25981 | Medium | 2024-02-19 | Not applicable | No public exploit | Separate Groups mode restrictions were not honored when performing a forum export, which would export forum data for all groups. By default this only provided additional access to non-editing teachers. |
| CVE-2024-25980 | Medium | 2024-02-19 | Not applicable | No public exploit | Separate Groups mode restrictions were not honored in the H5P attempts report, which would display users from other groups. By default this only provided additional access to non-editing teachers. |
| CVE-2024-25979 | Medium | 2024-02-19 | Not applicable | No public exploit | The URL parameters accepted by forum search were not limited to the allowed parameters. |
| CVE-2024-1062 | Medium | 2024-02-12 | Not applicable | No public exploit | A heap overflow flaw was found in 389-ds-base. This issue leads to a denial of service when writing a value larger than 256 chars in log_entry_attr. |
| CVE-2023-6681 | Medium | 2024-02-12 | Not applicable | No public exploit | A vulnerability was found in JWCrypto. This flaw allows an attacker to cause a denial of service (DoS) attack and possible password brute-force and dictionary attacks to be more resource-intensive. This issue can result in a large amount of computational consumption, causing a denial of service attack. |
| CVE-2023-52429 | Medium | 2024-02-12 | Not applicable | No public exploit | dm_table_create in drivers/md/dm-table.c in the Linux kernel through 6.7.4 can attempt to (in alloc_targets) allocate more than INT_MAX bytes, and crash, because of a missing check for struct dm_ioctl.target_count. |
| CVE-2024-1151 | Medium | 2024-02-11 | Not applicable | No public exploit | A vulnerability was reported in the Open vSwitch sub-component in the Linux Kernel. The flaw occurs when a recursive operation of code push recursively calls into the code block. The OVS module does not validate the stack depth, pushing too many frames and causing a stack overflow. As a result, this can lead to a crash or other related issues. |
| CVE-2024-1312 | Medium | 2024-02-08 | Not applicable | No public exploit | A use-after-free flaw was found in the Linux kernel's Memory Management subsystem when a user wins two races at the same time with a fail in the mas_prev_slot function. This issue could allow a local user to crash the system. |
| CVE-2024-0690 | Medium | 2024-02-06 | Not applicable | No public exploit | An information disclosure flaw was found in ansible-core due to a failure to respect the ANSIBLE_NO_LOG configuration in some scenarios. Information is still included in the output in certain tasks, such as loop items. Depending on the task, this issue may include sensitive information, such as decrypted secret values. |
| CVE-2023-6780 | Medium | 2024-01-31 | Not applicable | Proof of concept only | An integer overflow was found in the __vsyslog_internal function of the glibc library. This function is called by the syslog and vsyslog functions. This issue occurs when these functions are called with a very long message, leading to an incorrect calculation of the buffer size to store the message, resulting in undefined behavior. This issue affects glibc 2.37 and newer. |
| CVE-2024-23829 | Medium | 2024-01-29 | Not applicable | No public exploit | aiohttp is an asynchronous HTTP client/server framework for asyncio and Python. Security-sensitive parts of the Python HTTP parser retained minor differences in allowable character sets, that must trigger error handling to robustly match frame boundaries of proxies in order to protect against injection of additional requests. Additionally, validation could trigger exceptions that were not handled consistently with processing of other malformed input. Being more lenient than internet standards require could, depending on deployment environment, assist in request smuggling. The unhandled exception could cause excessive resource consumption on the application server and/or its logging facilities. This vulnerability exists due to an incomplete fix for CVE-2023-47627. Version 3.9.2 fixes this vulnerability. |
| CVE-2023-40551 | Medium | 2024-01-29 | Not applicable | No public exploit | A flaw was found in the MZ binary format in Shim. An out-of-bounds read may occur, leading to a crash or possible exposure of sensitive data during the system's boot phase. |
| CVE-2023-40550 | Medium | 2024-01-29 | Not applicable | No public exploit | An out-of-bounds read flaw was found in Shim when it tried to validate the SBAT information. This issue may expose sensitive data during the system's boot phase. |
| CVE-2023-40549 | Medium | 2024-01-29 | Not applicable | No public exploit | An out-of-bounds read flaw was found in Shim due to the lack of proper boundary verification during the load of a PE binary. This flaw allows an attacker to load a crafted PE binary, triggering the issue and crashing Shim, resulting in a denial of service. |
| CVE-2023-40546 | Medium | 2024-01-29 | Not applicable | No public exploit | A flaw was found in Shim when an error happened while creating a new ESL variable. If Shim fails to create the new variable, it tries to print an error message to the user; however, the number of parameters used by the logging function doesn't match the format string used by it, leading to a crash under certain circumstances. |
| CVE-2024-0814 | Medium | 2024-01-24 | Not applicable | No public exploit | Incorrect security UI in Payments in Google Chrome prior to 121.0.6167.85 allowed a remote attacker to potentially spoof security UI via a crafted HTML page. (Chromium security severity: Medium) |
| CVE-2024-0811 | Medium | 2024-01-24 | Not applicable | No public exploit | Inappropriate implementation in Extensions API in Google Chrome prior to 121.0.6167.85 allowed an attacker who convinced a user to install a malicious extension to leak cross-origin data via a crafted Chrome Extension. (Chromium security severity: Low) |
| CVE-2024-0809 | Medium | 2024-01-24 | Not applicable | No public exploit | Inappropriate implementation in Autofill in Google Chrome prior to 121.0.6167.85 allowed a remote attacker to bypass Autofill restrictions via a crafted HTML page. (Chromium security severity: Low) |
| CVE-2024-0805 | Medium | 2024-01-24 | Not applicable | No public exploit | Inappropriate implementation in Downloads in Google Chrome prior to 121.0.6167.85 allowed a remote attacker to perform domain spoofing via a crafted domain name. (Chromium security severity: Medium) |
| CVE-2024-22420 | Medium | 2024-01-19 | Not applicable | No public exploit | JupyterLab is an extensible environment for interactive and reproducible computing, based on the Jupyter Notebook and Architecture. This vulnerability depends on user interaction by opening a malicious Markdown file using JupyterLab preview feature. A malicious user can access any data that the attacked user has access to as well as perform arbitrary requests acting as the attacked user. JupyterLab version 4.0.11 has been patched. Users are advised to upgrade. Users unable to upgrade should disable the table of contents extension. |
| CVE-2024-0607 | Medium | 2024-01-18 | Not applicable | No public exploit | A flaw was found in the Netfilter subsystem in the Linux kernel. The issue is in the nft_byteorder_eval() function, where the code iterates through a loop and writes to the `dst` array. On each iteration, 8 bytes are written, but `dst` is an array of u32, so each element only has space for 4 bytes. That means every iteration overwrites part of the previous element corrupting this array of u32. This flaw allows a local user to cause a denial of service or potentially break NetFilter functionality. |