Overview 429,723 matches · 18,091 in Waratek scope · 1,809 protected · 6,074 exploited · 1,786 CISA KEV · 31,268 public PoC · 4,392 EPSS ≥ 0.5
429,723matches
18,091in Waratek scope4.2%
1,809protected0.4%
6,074exploited1.4%
1,786CISA KEV0.4%
31,268public PoC7.3%
4,392EPSS ≥ 0.51.0%
Protected by Waratek
1,824
0.4%
Rule in development
7
0.0%
Mitigation candidate
461
0.1%
No exploit published
15,799
3.7%
Outside Waratek scope
3,536
0.8%
Not applicable
388,908
90.5%
Withdrawn CVE
19,188
4.5%
Critical
44,353
10.3%
High
166,874
38.8%
Medium
176,640
41.1%
Low
18,190
4.2%
None
79
0.0%
Unknown
23,587
5.5%
split by
peak 104,495 / year
19939
Not applicable9
High6
Medium2
Low1
not blocked9
No public exploit9
199426
Not applicable25
Withdrawn CVE1
High14
Medium10
Low1
Unknown1
not blocked26
Working exploit published6
No public exploit20
199525
Not applicable25
Critical1
High17
Medium6
Low1
not blocked25
Working exploit published5
No public exploit20
199675
No exploit published1
Not applicable73
Withdrawn CVE1
Critical1
High43
Medium21
Low9
Unknown1
not blocked75
Working exploit published18
Forecast only1
No public exploit56
1997253
Not applicable252
Withdrawn CVE1
Critical1
High143
Medium89
Low19
Unknown1
not blocked253
Exploited2
Working exploit published73
Forecast only2
No public exploit176
1998247
Not applicable246
Withdrawn CVE1
Critical1
High137
Medium85
Low23
Unknown1
not blocked247
Exploited1
Working exploit published50
No public exploit196
1999923
No exploit published2
Outside Waratek scope1
Not applicable891
Withdrawn CVE29
Critical3
High423
Medium357
Low111
Unknown29
not blocked923
Exploited2
Working exploit published282
No public exploit639
20001,020
Mitigation candidate7
No exploit published7
Not applicable1,005
Withdrawn CVE1
Critical2
High454
Medium467
Low96
Unknown1
not blocked1,020
Exploited5
Working exploit published427
Forecast only1
No public exploit587
20011,679
Protected by Waratek1
Mitigation candidate4
No exploit published11
Outside Waratek scope10
Not applicable1,650
Withdrawn CVE3
Critical12
High776
Medium706
Low182
Unknown3
blocked by ARMR today1
not blocked1,678
Exploited14
Working exploit published480
Forecast only2
No public exploit1,183
20022,170
Protected by Waratek3
Mitigation candidate8
No exploit published28
Outside Waratek scope4
Not applicable2,113
Withdrawn CVE14
Critical10
High1,023
Medium980
Low143
Unknown14
blocked by ARMR today3
not blocked2,167
Exploited12
Working exploit published545
Forecast only9
No public exploit1,604
20031,548
Protected by Waratek2
Mitigation candidate8
No exploit published31
Outside Waratek scope4
Not applicable1,482
Withdrawn CVE21
Critical9
High674
Medium747
Low97
Unknown21
blocked by ARMR today2
not blocked1,546
Exploited10
Working exploit published499
Forecast only1
No public exploit1,038
20042,479
Protected by Waratek3
Mitigation candidate1
No exploit published25
Outside Waratek scope5
Not applicable2,417
Withdrawn CVE28
Critical10
High973
Medium1,265
Low203
Unknown28
blocked by ARMR today3
not blocked2,476
Exploited21
Working exploit published755
Forecast only1
No public exploit1,702
20055,010
Protected by Waratek3
Mitigation candidate5
No exploit published76
Outside Waratek scope15
Not applicable4,833
Withdrawn CVE78
Critical13
High2,048
Medium2,430
Low441
Unknown78
blocked by ARMR today3
not blocked5,007
Exploited22
Working exploit published1,341
Forecast only11
No public exploit3,636
20066,659
Protected by Waratek8
Mitigation candidate5
No exploit published127
Outside Waratek scope54
Not applicable6,414
Withdrawn CVE51
Critical12
High2,763
Medium3,324
Low509
Unknown51
blocked by ARMR today8
not blocked6,651
Exploited39
Working exploit published2,438
Proof of concept only1
Forecast only6
No public exploit4,175
20076,596
Protected by Waratek7
Mitigation candidate13
No exploit published146
Outside Waratek scope66
Not applicable6,284
Withdrawn CVE80
Critical21
High3,162
Medium3,101
Low232
Unknown80
blocked by ARMR today7
not blocked6,589
Exploited47
Working exploit published2,495
Proof of concept only5
Forecast only5
No public exploit4,044
20085,664
Protected by Waratek7
Mitigation candidate11
No exploit published134
Outside Waratek scope51
Not applicable5,429
Withdrawn CVE32
Critical19
High2,846
Medium2,582
Low185
Unknown32
blocked by ARMR today7
not blocked5,657
Exploited42
Working exploit published2,518
Proof of concept only4
Forecast only9
No public exploit3,091
20095,778
Protected by Waratek9
Mitigation candidate16
No exploit published195
Outside Waratek scope45
Not applicable5,467
Withdrawn CVE46
Critical15
High2,734
Medium2,786
Low197
Unknown46
blocked by ARMR today9
not blocked5,769
Exploited74
Working exploit published2,590
Proof of concept only2
Forecast only3
No public exploit3,109
20104,667
Protected by Waratek9
Mitigation candidate14
No exploit published168
Outside Waratek scope74
Not applicable4,374
Withdrawn CVE28
Critical28
High2,093
Medium2,241
Low277
Unknown28
blocked by ARMR today9
not blocked4,658
Exploited73
Working exploit published1,313
Proof of concept only1
Forecast only9
No public exploit3,271
20114,172
Protected by Waratek6
Mitigation candidate13
No exploit published205
Outside Waratek scope83
Not applicable3,843
Withdrawn CVE22
Critical5
High1,784
Medium2,101
Low260
Unknown22
blocked by ARMR today6
not blocked4,166
Exploited50
Working exploit published691
Proof of concept only5
Forecast only4
No public exploit3,422
20125,351
Protected by Waratek9
Mitigation candidate26
No exploit published291
Outside Waratek scope76
Not applicable4,886
Withdrawn CVE63
Critical21
High1,724
Medium3,035
Low508
Unknown63
blocked by ARMR today9
not blocked5,340
not established2
Exploited59
Working exploit published831
Proof of concept only7
Forecast only46
No public exploit4,408
20135,324
Protected by Waratek26
Mitigation candidate19
No exploit published318
Outside Waratek scope284
Not applicable4,540
Withdrawn CVE137
Critical23
High1,735
Medium2,914
Low515
Unknown137
blocked by ARMR today26
not blocked5,297
not established1
Exploited97
Working exploit published520
Proof of concept only3
Forecast only21
No public exploit4,683
20148,008
Protected by Waratek41
Mitigation candidate13
No exploit published292
Outside Waratek scope233
Not applicable7,349
Withdrawn CVE80
Critical20
High1,938
Medium5,314
Low656
Unknown80
blocked by ARMR today41
not blocked7,967
Exploited97
Working exploit published795
Proof of concept only13
Forecast only16
No public exploit7,087
20156,595
Protected by Waratek33
Mitigation candidate7
No exploit published308
Outside Waratek scope171
Not applicable5,975
Withdrawn CVE101
Critical51
High2,354
Medium3,501
Low588
Unknown101
blocked by ARMR today33
not blocked6,562
Exploited96
Working exploit published647
Proof of concept only16
Forecast only19
No public exploit5,817
20166,517
Protected by Waratek61
Mitigation candidate10
No exploit published479
Outside Waratek scope108
Not applicable5,791
Withdrawn CVE68
Critical887
High2,895
Medium2,446
Low221
Unknown68
blocked by ARMR today59
partly blocked2
not blocked6,455
not established1
Exploited103
Working exploit published429
Proof of concept only27
Forecast only32
No public exploit5,926
201718,113
Protected by Waratek108
Mitigation candidate15
No exploit published701
Outside Waratek scope212
Not applicable13,606
Withdrawn CVE3,471
Critical2,113
High6,608
Medium5,687
Low234
Unknown3,471
blocked by ARMR today104
partly blocked4
not blocked18,005
Exploited212
Working exploit published1,259
Proof of concept only52
Forecast only23
No public exploit16,567
201818,154
Protected by Waratek183
Mitigation candidate23
No exploit published724
Outside Waratek scope205
Not applicable15,375
Withdrawn CVE1,644
Critical2,616
High7,571
Medium6,163
Low160
Unknown1,644
blocked by ARMR today182
partly blocked1
not blocked17,971
Exploited236
Working exploit published1,069
Proof of concept only87
Forecast only34
No public exploit16,728
201918,938
Protected by Waratek123
Rule in development1
Mitigation candidate32
No exploit published797
Outside Waratek scope262
Not applicable16,090
Withdrawn CVE1,633
Critical2,657
High7,227
Medium7,117
Low304
Unknown1,633
blocked by ARMR today121
partly blocked2
not blocked18,813
not established2
Exploited330
Working exploit published783
Proof of concept only126
Forecast only51
No public exploit17,648
202019,222
Protected by Waratek157
Mitigation candidate38
No exploit published943
Outside Waratek scope263
Not applicable16,921
Withdrawn CVE900
Critical2,780
High7,782
Medium7,359
Low401
Unknown900
blocked by ARMR today157
not blocked19,065
Exploited345
Working exploit published602
Proof of concept only155
Forecast only66
No public exploit18,054
202121,950
Protected by Waratek124
Rule in development1
Mitigation candidate28
No exploit published669
Outside Waratek scope331
Not applicable18,996
Withdrawn CVE1,801
Critical2,850
High8,770
Medium8,137
Low392
Unknown1,801
blocked by ARMR today124
not blocked21,826
Exploited494
Working exploit published446
Proof of concept only217
Forecast only166
No public exploit20,627
202226,431
Protected by Waratek215
Rule in development1
Mitigation candidate20
No exploit published901
Outside Waratek scope269
Not applicable23,667
Withdrawn CVE1,358
Critical4,441
High10,337
Medium9,908
Low385
Unknown1,360
blocked by ARMR today215
not blocked26,216
Exploited481
Working exploit published565
Proof of concept only2,768
Forecast only97
No public exploit22,520
202330,949
Protected by Waratek161
Mitigation candidate40
No exploit published882
Outside Waratek scope205
Not applicable27,528
Withdrawn CVE2,133
Critical5,031
High11,637
Medium11,824
Low323
Unknown2,134
blocked by ARMR today161
not blocked30,786
not established2
Exploited572
Working exploit published555
Proof of concept only5,590
Forecast only110
No public exploit24,122
202440,704
Protected by Waratek108
Mitigation candidate28
No exploit published620
Outside Waratek scope186
Not applicable39,011
Withdrawn CVE751
Critical4,874
High15,332
Medium18,998
Low740
None1
Unknown759
blocked by ARMR today106
partly blocked2
not blocked40,596
Exploited749
Working exploit published402
Proof of concept only7,466
Forecast only83
No public exploit32,004
202549,972
Protected by Waratek103
Rule in development4
Mitigation candidate25
No exploit published731
Outside Waratek scope139
Not applicable47,148
Withdrawn CVE1,822
Critical4,490
High16,670
Medium23,043
Low3,040
None10
Unknown2,719
blocked by ARMR today103
not blocked49,867
not established2
Exploited747
Working exploit published593
Proof of concept only10,978
Forecast only17
No public exploit37,637
2026104,495
Protected by Waratek314
Mitigation candidate32
No exploit published5,987
Outside Waratek scope180
Not applicable95,193
Withdrawn CVE2,789
Critical11,336
High42,181
Medium37,894
Low6,736
None68
Unknown6,280
blocked by ARMR today310
partly blocked4
not blocked104,180
not established1
Exploited1,042
Working exploit published479
Proof of concept only19,752
Forecast only5
No public exploit83,217
199319961999200220052008201120142017202020232026
| CVE | Severity | Published▾ | Status | Exploitation | Description |
|---|---|---|---|---|---|
| CVE-2026-99604 | Unknown | 2026-11-20 | Not applicable | No public exploit | In the Linux kernel, the following vulnerability has been resolved: drm/etnaviv: Flush the tile status cache through both the PE and BLT Since commit f232d9ec029c ("drm/etnaviv: fix TS cache flushing on GPUs with BLT engine"), jobs on GPUs with a BLT engine use a BLT command to flush the tile status cache instead of TS_FLUSH_CACHE, which is broken on most of these GPUs. GC7000 r6008/r6009 and GC8200 r6401 are the other way around: TS_FLUSH_CACHE works, but the BLT command does not flush the cache. The vendor driver handles these GPUs using TS_FLUSH_CACHE, but the etnaviv kernel driver has no way to identify them. As a result, dirty tile status cache lines survive the end of a job. They are written back by the next cache flush, using the page table of the job issuing it. If that job belongs to another process, the write goes to the wrong address space. On GC7000 r6009 this causes MMU faults and GPU recoveries blamed on an innocent process. I see around 1100 per run of a multisample depth/stencil test running alongside two other GPU clients. Emit both flushes at the end of every job on GPUs with a BLT engine. Whichever does not work on a given GPU is a no-op. Since dirty lines are only written back once, this costs one additional state load per job. |
| CVE-2026-99603 | Unknown | 2026-11-20 | Not applicable | No public exploit | In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: kernel: use RCU to free endpoint listeners mptcp_pm_nl_create_listen_socket() starts the TCP listener directly instead of going through mptcp_listen(). It consequently misses setting SOCK_RCU_FREE on the parent MPTCP socket. tcp_child_process() can invoke the listener's subflow_data_ready() callback without holding the MPTCP parent lock or a reference to the parent. An authenticated MP_JOIN racing with endpoint teardown can therefore access the parent after its last reference has been dropped. The ADD_ADDR error path can also close an already published listener. Set SOCK_RCU_FREE before __inet_listen_sk() publishes the TCP listener, matching mptcp_listen(). This protects the parent on every subsequent close path, including a failed endpoint addition. |
| CVE-2026-99602 | Unknown | 2026-11-20 | Not applicable | No public exploit | In the Linux kernel, the following vulnerability has been resolved: udf: don't let the extent type hide an exhausted free-space table extent udf_table_new_block() takes the first block of the free-space table extent closest to the goal. It keeps that extent's type and length together in goal_elen, subtracts one block, and deletes the extent only if goal_elen then reaches zero. UDF 2.60 section 2.3.7.1 requires the free-space extents of an Unallocated Space Entry to be of type 1 (allocated but not recorded), and mkudffs writes them that way. For such an extent the type bits keep goal_elen non-zero, so taking its last block leaves a type-1 extent of length zero behind, starting at the block after the extent, which is in use. The next allocation that picks this empty extent returns that in-use block. Subtracting a block from 0x40000000 then borrows from the type bits, and the extent becomes type 0 with a length of 2^30 - blocksize: about a gigabyte of "free" space overlapping live metadata, the other table extents and whatever lies behind the partition. From then on blocks are handed out twice, or past the end of the partition. Extents that udf_table_free_blocks() adds are type 0, where the check works, so only tables written by mkudffs or by another implementation are affected. Nothing more than filling such a filesystem is needed: on a fresh 1 MiB "mkudffs --space=unalloctable" image, creating empty files until the partition is full writes file entries over the reserve volume descriptor sequence and the backup anchor, and df then reports a negative amount of used space. On syzbot's images the same double allocation is what the two reports below trip over. In the first, ftruncate() extends a new file with enough hole extents to need a chain of allocation extent descriptors; one AED is placed on another inode's file entry, and a later one is placed on the block of the AED currently being filled, which udf_setup_indirect_aext() zeroes, so __udf_add_aext() finds lengthAllocDescs out of step with its cursor. In the second, an AED is placed past the end of the device, sb_getblk() fails, and the error path of udf_do_extend_file() calls udf_truncate_extents() on an extent list that no longer covers i_size. Keep the type separately from the length, as udf_table_prealloc_blocks() already does. |
| CVE-2026-99601 | Unknown | 2026-11-20 | Not applicable | No public exploit | In the Linux kernel, the following vulnerability has been resolved: udf: check the unallocated space table when it is loaded udf_table_new_block() hands out the first block of the extent closest to its goal and trusts that the extent covers at least one whole block inside the partition. Nothing checks that. A zero-length extent makes it return the block the extent points at, which need not be free, and the subtraction of one block then underflows the length into the type bits, turning the entry into a bogus continuation. An extent running past the end of the partition makes it return blocks behind the partition. Such tables are not only found on crafted images: until the previous commit, udf_table_new_block() itself left zero-length extents behind in tables written by mkudffs, and then converted them into extents running past the partition. Check every extent once when the table is loaded, and refuse read-write access if one is empty, is not a whole number of blocks, or does not lie inside the partition, in the same way as for other allocation information the kernel cannot use. Check first that the table is an Unallocated Space Entry at all: the walk starts at the offset of the allocation descriptors in one, and for a file entry that offset lies before the inode's in-memory copy of the descriptors. Treat a chain of allocation extent descriptors that leads back to itself the same way: the walk would otherwise return the same extents forever, and the mount would never finish. Let a fatal signal interrupt the walk and fail the mount. Refusing read-write access to an empty extent is deliberate. It shows that an old kernel took the last block but left the entry behind. If consumed again, the entry returns an in-use block and turns into a huge bogus extent. Refusing the table before that happens avoids this second allocation; the filesystem can still be mounted read-only. The check cannot detect every overlap that may already exist in a damaged table. This patch should be backported together with the previous one: that patch stops creating new empty extents, and this one rejects existing ones before they are consumed again. |
| CVE-2026-99600 | Unknown | 2026-11-20 | Not applicable | No public exploit | In the Linux kernel, the following vulnerability has been resolved: udf: fix preallocation discarding before an empty allocation extent udf_discard_prealloc() finds the last extent of a file by peeking at the next one with udf_next_aext() and stopping when that returns 0. The peek reads into eloc and elen, and the code then uses them as the last extent. But when udf_next_aext() returns 0 they hold no defined value: if the extent list ends in a continuation descriptor that leads to an empty allocation extent, they describe that continuation, i.e. the block of the empty allocation extent, one block long. The kernel creates such lists itself: when udf_delete_aext() removes the only descriptor of the last allocation extent in a list, it leaves that allocation extent empty and the continuation to it in place. If the last extent is a preallocation, udf_discard_prealloc() deletes it with udf_delete_aext(), which finds the following allocation extent empty, so it also removes the continuation and frees that allocation extent's block. udf_discard_prealloc() then frees eloc and elen: that block a second time, instead of the preallocated blocks. On a space bitmap the preallocated blocks leak and the free block count drifts. On an unallocated space table the second free adds a second free extent for the same block, which is later handed out twice: fsx as run by generic/091 and generic/263 ends up with two parts of its test file in one block and reads back bad data. Peek into separate variables, so that eloc and elen keep the last extent that udf_next_aext() returned with 1. |
| CVE-2026-99599 | Unknown | 2026-11-20 | Not applicable | No public exploit | In the Linux kernel, the following vulnerability has been resolved: udf: don't use eloc after the end of the unallocated space table When udf_next_aext() returns 0, its eloc, elen and etype outputs hold no defined value. Two walks of the unallocated space table still use eloc after the walk has reached the end of the table. udf_table_prealloc_blocks() looks for a free extent starting at first_block and decides whether it found one by comparing eloc with first_block after the walk. If the table's list ends in a continuation descriptor that leads to an empty allocation extent, eloc is then the block of that allocation extent, which is in use, and if that is first_block, the block is handed out as preallocation. Once udf_discard_prealloc() no longer frees the wrong block, this is what still makes fsx in generic/091 and generic/263 read back bad data on a table, in about one run in four. Only take the extent if the walk stopped at it. When udf_table_free_blocks() cannot merge the freed blocks into an existing extent, it appends a new one and sets only its block number, so the partition reference comes from whatever eloc held after the walk, and with long allocation descriptors it is written to disk. For a table without extents, eloc was never set. Take the partition reference from the freed blocks instead. Short allocation descriptors do not store the partition reference, which is why this half remains a latent long-descriptor fix rather than a reproduced failure. |
| CVE-2026-99598 | Unknown | 2026-11-20 | Not applicable | No public exploit | In the Linux kernel, the following vulnerability has been resolved: MIPS: sgi-ip32: Leave MACE PCI control alone in config accesses mace_pci_read_config() clears the master abort interrupt enable in the MACE PCI control register around each config read. A register read followed by two register writes can hang CRIME 1.1 under DMA load. Ack master aborts in the error register instead, and follow every write with a read so back-to-back accesses cannot form that sequence. |
| CVE-2026-99597 | Unknown | 2026-11-20 | Not applicable | No public exploit | In the Linux kernel, the following vulnerability has been resolved: srcu: Add list_splice_init_srcu() list_splice_init_rcu() makes a list look empty to new readers, waits for the current ones with the given sync function, and only then links the entries into the new list. The sync function takes no argument, so it can wait for RCU readers but not for the readers of an srcu_struct. Passing synchronize_rcu() for a list read under SRCU still builds, but leaves SRCU readers on the entries while the last one's next pointer is moved onto the new list head. nvme_remove_namespaces() does this today. Add list_splice_init_srcu(), which waits for the readers of the given srcu_struct instead. |
| CVE-2026-99596 | Unknown | 2026-11-20 | Not applicable | No public exploit | In the Linux kernel, the following vulnerability has been resolved: nvme: wait for SRCU readers before splicing the namespace list Readers walk ctrl->namespaces under ctrl->srcu, and some of them sleep there, e.g. nvme_wait_freeze() waiting for I/O to drain. nvme_remove_namespaces() moves the list onto its on-stack ns_list with list_splice_init_rcu(), which only waits for RCU readers before relinking the entries. A reader still on the last namespace then follows its next pointer to ns_list instead of ctrl->namespaces and treats the stack as a namespace. Deleting a controller while a Format NVM passthrough waits for a delayed read on the last namespace gives: BUG: KASAN: stack-out-of-bounds in nvme_wait_freeze+0x102/0x120 Read of size 8 at addr ff110001d2f3fc38 by task nvme/4413 Call Trace: nvme_wait_freeze nvme_passthru_start nvme_submit_user_cmd nvme_user_cmd nvme_dev_ioctl BUG: unable to handle page fault for address: ffffffff8af04850 Use list_splice_init_srcu() instead, which waits for the SRCU readers. This also takes the RCU grace period out of every controller deletion. Deleting 64 tcp controllers with one namespace each, median of 3 runs on each of two boots per kernel: before after nvme disconnect-all (ms) 3491 / 3509 2996 / 3165 nvme_remove_namespaces() avg (ms) 39.0 / 40.5 31.9 / 34.7 |
| CVE-2026-99595 | Unknown | 2026-11-20 | Not applicable | No public exploit | In the Linux kernel, the following vulnerability has been resolved: sched/fair: Clear throttle state when leaving the fair class Task-based CFS bandwidth throttling removes a task's fair sched_entity while the scheduler core still considers the task queued. p->throttled carries the fair-specific state across dequeue/enqueue operations. DEQUEUE_CLASS removes the task from cfs_rq->throttled_limbo_list but retains the bit. If the last finite CFS quota is disabled while the task runs in another class, it is absent from the unthrottle walk and the bit survives. Returning to fair while cfs_bandwidth_used() is false then performs a real fair enqueue with p->throttled still set. After bandwidth is re-enabled, a class-change dequeue treats the stale bit as limbo state and skips __dequeue_task(). p->se.on_rq therefore remains set, and put_prev_task_fair() places the entity in the EEVDF tree while the task moves to RT. On exit, the fair picker can select the TASK_DEAD task. __schedule() then returns to do_task_dead(), which hits BUG(). Keep p->throttled across migrations and group moves, but clear it on DEQUEUE_CLASS because fair-specific state must not outlive fair-class membership. A later return to fair uses the normal enqueue path. That path still respects a throttled cfs_rq. A KASAN, LOCKDEP and DEBUG_LIST v7.3 kernel reproduced the do_task_dead() BUG in 3/3 root and 3/3 delegated uid-1000 runs with CapPrm=CapEff=0 and RLIMIT_RTPRIO=1. The fix passed both matrices plus a 3/3 class-switch control with bandwidth continuously enabled, without a scheduler warning, KASAN report, lockdep splat or crash. An AI coding assistant analyzed the state mismatch and drafted the initial reproducer, fix candidate and this changelog. The source paths, trigger, controls and results were rechecked against the cited revisions. |
| CVE-2026-99594 | Unknown | 2026-11-20 | Not applicable | No public exploit | In the Linux kernel, the following vulnerability has been resolved: arm64: kexec_file: Fix elf_headers memory leak in retry loop A retry allocates new elf headers and overwrites image->elf_headers, leaking the previous buffer. Free it before assigning. [catalin.marinas@arm.com: drop the redundant NULL check before vfree()] |
| CVE-2026-99593 | Unknown | 2026-11-20 | Not applicable | No public exploit | In the Linux kernel, the following vulnerability has been resolved: arm64: sdei: Preserve the interrupted context's exception registers An SDEI event is dispatched by firmware regardless of PSTATE.DAIF, so it can interrupt the kernel where the exception registers are live: - exception entry, before kernel_entry has saved ELR_EL1/SPSR_EL1 and before the C handler has read ESR_EL1/FAR_EL1; - exception return, after kernel_exit has loaded ELR_EL1/SPSR_EL1 and before the ERET. An IRQ or pseudo-NMI cannot arrive there with PSTATE.I set. Firmware saves only x0-x17, PC and PSTATE around an SDEI event, so a synchronous exception taken by the handler overwrites the interrupted context's ELR, SPSR, ESR and FAR. do_sdei_event() only notices that ELR changed, and warns. The interrupted context then carries on with the handler's state. A task interrupted on its way into the kernel can be sent SIGILL for the handler's kernel data abort. A task interrupted on its way back to user space ERETs to EL1, at the handler's fixup address, with user registers loaded. With SDEI delivering NMI backtraces, this happens in normal operation. The handler runs show_regs(), which reads through possibly-NULL pointers with the _nofault() accessors. print_worker_info() faults this way for a kworker that is not running a work item, and a single sysrq-l warned once per such kworker. Save ELR, SPSR, ESR and FAR in __sdei_handler() before irqentry_nmi_enter(), which can take an exception too, and restore them after irqentry_nmi_exit(). Once they are restored, a nested exception is harmless if its handler is safe in NMI context. That holds for EL1 data aborts on translation, permission and access-flag faults, which never take the mmap lock in NMI context, and for BRK. Warn once, with the syndrome, about any other exception class. |
| CVE-2026-99592 | Unknown | 2026-11-20 | Not applicable | No public exploit | In the Linux kernel, the following vulnerability has been resolved: x86/mm: Fix global ASID handed out to two processes On AMD CPUs with INVLPGB, two live processes can get the same MAX_ASID_AVAILABLE global ASID value. The two then hit each other's TLB entries, so each can read or corrupt the other's memory. The global ASID space is managed lazily. When a global ASID is freed, its bit is set in the global_asid_freed bitmap. Once the free ASID search reaches the end of the global_asid_used bitmap, a global flush is done to really reclaim the lazily freed global ASIDs. However, the current code can assign the same global ASID to two different processes, if one process is assigned MAX_ASID_AVAILABLE - 1, another process MAX_ASID_AVAILABLE, and both stick around (keeping their global ASID numbers in use) until the search wraps around again. At that point a third process could also get assigned MAX_ASID_AVAILABLE. the highest ASID stays in use, so it is not handed out again last_global_asid stays below it, so no reset the clear bits run out find_next_zero_bit() returns MAX_ASID_AVAILABLE global_asid_available > 0, so the failure is not caught MAX_ASID_AVAILABLE is handed out as an ASID A search only looks at the bits below MAX_ASID_AVAILABLE, so it cannot see that this value is in use. The next failed search hands it out again, even if the first process still holds it. The fix used here is to reset the global ASID space after a failed search, and to search again. If that search fails too, no global ASID is handed out. The test for !global_asid_available is removed, because use_global_asid() only calls allocate_global_asid() if global_asid_available > 0. The remaining test is for a condition that should be impossible. [ riel: simplify code, massage changelog and comment ] |
| CVE-2026-99591 | Unknown | 2026-11-20 | Not applicable | No public exploit | In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Force device table to maximum size IOMMU can perform out-of-bounds read of the device table entry (DTE) that is adjacent to the last DTE and falls outside the device table. For example, if the device table can hold 0 to N-1 entries, then the IOMMU can be made to fetch the Nth entry, which falls outside the device table. The device table is owned by the hypervisor (HV) and is assigned in 4KB pages that are contiguous in system physical address (SPA). If the out-of-bound DTE falls on a guest-owned page, then the guest can exploit this bug to setup malicious table walks to corrupt HV pages and/or bring down the system. Note that this bug does not manifest when the device table size is set to its maximum size of 2MB. Therefore, force the device table size to the maximum 2MB on affected processors. These are CPU family 0x17 (Zen1/Zen2) through family 0x1a (Zen5/BRH). This is a mitigation for CVE-2024-21963. kdump reuses the previous kernel's device table only when the size encoded in the IOMMU device-table register matches pci_seg->dev_table_size. A mixed rollout disagrees: the unpatched kernel uses the IVRS-derived size and the patched kernel uses 2MB, so __reuse_device_table() rejects the table. On SNP-capable IOMMUs that rejection panics the kdump kernel. Kernels that both have this patch agree on 2MB and reuse succeeds. Update the production kernel and the crash kernel together. |
| CVE-2026-99590 | Unknown | 2026-11-20 | Not applicable | No public exploit | In the Linux kernel, the following vulnerability has been resolved: ceph: clamp the inline data length in ceph_fill_inline_data() The MDS decides how much inline data to attach to a reply, and the client parses inline_len without any upper bound: ceph_decode_need() only verifies that the message actually carries that many bytes. ceph_fill_inline_data() then copies the data into a single folio with no length check, so a malicious or buggy MDS returning more inline data than the folio can hold writes past its end. Clamp the length to folio_size() so both callers, handle_cap_grant() and fill_inode(), are covered. |
| CVE-2026-99589 | Unknown | 2026-11-20 | Not applicable | No public exploit | In the Linux kernel, the following vulnerability has been resolved: batman-adv: tt: clear ROAM flag when re-adding a pending local client When a ROAMING_ADV is received for an announced local client, batadv_tt_local_mark_removed() sets BATADV_TT_CLIENT_ROAM, queues a DEL|ROAM change and marks the entry as BATADV_TT_CLIENT_PENDING. If the client sends a frame again before the next TTVN commit, batadv_tt_local_add_existing() only clears the PENDING flag and returns early. The ADD cancels the queued DEL, but the entry keeps the ROAM flag: * batadv_is_my_client() reports the client as not served by this node * batadv_tt_local_client_is_roaming() reroutes unicast frames for it to the node which sent the ROAMING_ADV The ROAM flag is only removed with the next frame of the client. Since BATADV_TT_CLIENT_ROAM is set together with BATADV_TT_CLIENT_PENDING, it has to be cleared also at the same time with BATADV_TT_CLIENT_PENDING when the client roamed back. |
| CVE-2026-99588 | Unknown | 2026-11-20 | Not applicable | No public exploit | In the Linux kernel, the following vulnerability has been resolved: batman-adv: tt: only update flags for TT events In the first implementation of the translation table events, it was only possible to announce: * ADD: new locally detected client * DEL: disappeared local client If an ADD event was queued and then a DEL event was queued in the same timeslot, it is valid to destroy both events because nothing actually changed for remode nodes But with commit 3c4f7ab60cc2 ("batman-adv: improve the TT component to support runtime flag changes") and subsequent changes, it could also happen that there are extra ADD events: * ADD: _NEW_ locally detected client * ADD: already existing client with new flags * DEL: disappeared local client The first and the last type of event could in theory still be removed together from the (to be announced) events queue. But if the "update flags" ADD is dropped together with the DEL, it would still leave global translation table of a remote node in the incorrect state - believing that the client didn't disappear. If a detected client was previously announced, a DEL event must only overwrite the "update flags" ADD but the DEL itself must still continue to exist in the (to be anounced) events queue. For now, adjustment of the announced flags is used for everything instead of dropping already queued up events completely. Similarly, a DEL followed by an ADD caused both entries to be deleted. But the new ADD could announce flags changes which were not yet present for the client before it was marked for DELetion. The new ADD must therefore only overwrite the DEL - but still be kept. |
| CVE-2026-99587 | Unknown | 2026-11-20 | Not applicable | No public exploit | In the Linux kernel, the following vulnerability has been resolved: ata: libata-scsi: reject data-in commands with a data-out buffer SG_IO can submit a data-in SCSI command with DMA_TO_DEVICE. The scatterlist can then contain pages pinned without write access. ata_scsi_rbuf_fill() writes simulated replies to that scatterlist; in the reported case, the copy tried to write the shared zero page and faulted in the kernel. The same mismatch can affect SG_IO commands translated by libata. ZBC IN and GET PHYSICAL ELEMENT STATUS completion handlers can modify the receive buffer even if the drive aborts the command. For ATAPI, the successful INQUIRY completion also rewrites the buffer in atapi_fixup_inquiry(). Reject these mismatched commands before the buffer is written or the command is issued. Report ABORTED COMMAND / DATA IN BUFFER ERROR because the CDB itself can be valid; the supplied transfer direction is wrong. |
| CVE-2026-99586 | Unknown | 2026-11-20 | Not applicable | No public exploit | In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu-v3: Handle ARM erratum for CONT under invalidation with SVA The erratum (MMU-700: #3777127, S3: #3673557) deals with under invalidation of a CONT PTE grouping in the SMMU. The recommended work around is to use a range invalidation that spans the entire CONT. The only user of CONT in the kernel right now is through SVA sharing a CPU page table that contains a CONT created by the mm. Previously it was thought that this errata was dealt with because the driver always uses range invalidation. However, there is a subtle detail in the errata that the invalidation range must fully enclose the entire CONT for it to work. It seems that two sequential range invalidations, with a split point falling inside a CONT grouping, will not prevent the errata. The SMMU's range invalidation generation algorithm does not produce a single invalidation for a single SVA invalidation request, nor does the mm carefully align the SVA invalidation ranges to accommodate the splitting of the invalidation into several ranges. Thus, when processing a SVA invalidation, the range invalidation splitting routine can generate a range invalidation that is split in the middle of the CONT and risk under invalidation from this errata. This condition could be triggered by a malicious userspace manipulating the TLB gathers via mmap/mprotect/munmap. Update the errata list to the include the S3 variation, detect the IOMMUs that have it, and then have SVA invalidations use a simplified version of the over invalidation algorithm from the tlbi rework series. This ensures that a single range invalidation is issued for a single MMU notifier callback and now the range invalidation is guarenteed to cover any posible CONT. Future work to add CONT to iommu_domain page tables should either use this one-invalidate/one-range invalidation algorithm or disable CONT support in the iommu_domain. |
| CVE-2026-99585 | Unknown | 2026-11-20 | Not applicable | No public exploit | In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Use kvm_s2_fault_vma_info in gmem_abort() gmem_abort() maps at s2fd->fault_ipa, which HPFAR_EL2 holds at 4K granularity whatever the page size. The generic page-table code aligns it, but pkvm_pgtable_stage2_map() looks up existing mappings over [addr, addr + size), so on a pKVM host with pages larger than 4K a guest_memfd-backed guest that faults past the first 4K of a page can find its neighbour's mapping, get -EAGAIN and take the same fault forever. The memory fault exit reports s2fd->fault_ipa too, which for a nested guest's fault is the nested IPA rather than the canonical one kvm_gmem_get_pfn() failed on. Take the addresses from kvm_s2_fault_vma_info instead, as user_mem_abort() does, and report the canonical gfn in the memory fault exit. kvm_s2_fault_get_vma_info() itself isn't called: a guest_memfd memslot's userspace_addr doesn't need to be backed by a VMA. |
| CVE-2026-99584 | Unknown | 2026-11-20 | Not applicable | No public exploit | In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid folio->mapping dereference in is_{meta, node}_folio() Otherwise, it may cause NULL pointer dereference in race condition: Thread A Thread B - f2fs_setattr - f2fs_truncate - f2fs_truncate_blocks - f2fs_do_truncate_blocks - f2fs_truncate_inode_blocks - truncate_dnode - truncate_node - invalidate_mapping_pages - folio->mapping = NULL - folio_lock - is_node_folio - F2FS_F_SB(folio): dereference on folio->mapping |
| CVE-2026-99583 | Unknown | 2026-11-20 | Not applicable | No public exploit | In the Linux kernel, the following vulnerability has been resolved: sctp: hold shkey across socket migration sctp_sock_migrate() transfers queued DATA skbs from the old socket to the new one. skb_orphan() invokes sctp_wfree() during that transfer and drops the skb-owned shared-key reference. If userspace has removed that key from the association, this can be the final reference. The following sctp_set_owner_w() then dereferences the freed chunk->shkey while trying to take the new owner reference. Take a temporary shared-key reference before orphaning the skb and release it after the new owner has taken its reference. This preserves the selected authentication key throughout the ownership transfer. Bug found and triaged by OpenAI Security Research and validated by Trail of Bits. |
| CVE-2026-99582 | Unknown | 2026-11-20 | Not applicable | No public exploit | In the Linux kernel, the following vulnerability has been resolved: sctp: re-point retained control chunks on association migration sctp_sock_migrate() transfers DATA chunk ownership but leaves retained control chunks pointing at the old socket. A later retransmission can therefore access the socket after it has been freed. Extend the migration walk to cover retained control chunks and use sctp_control_set_owner_w() to assign their new owner. Reuse the DATA ownership check so each chunk is processed once per pass, even when it is reachable through multiple lists or retained pointers. Preserve a control chunk's existing authentication key across migration so its final release can still generate SCTP_AUTH_FREE_KEY when needed. |
| CVE-2026-99581 | Unknown | 2026-11-20 | Not applicable | No public exploit | In the Linux kernel, the following vulnerability has been resolved: platform/chrome: cros_usbpd_notify: Only use drvdata when parent is GOOG0004 cros_usbpd_notify_probe_acpi() takes the EC device pointer from dev_get_drvdata(dev->parent) and assumes it is a struct cros_ec_device. That only holds when GOOG0003 is a child of GOOG0004. On older devices without that hierarchy, such as Google Nami, GOOG0003 and GOOG0004 are siblings under the ACPI EC (PNP0C09): PNP0C09:00 (acpi-ec) |-- GOOG0003:00 (cros-usbpd-notify-acpi) `-- GOOG0004:00 (cros_ec_lpcs) Before commit db65a06d10b3 ("ACPI: EC: Convert the driver to a platform one") the parent platform device had no driver data, so the driver warned and continued without an EC pointer, as intended for these devices. Since that commit the ACPI EC driver stores its struct acpi_ec there, so the driver treats a struct acpi_ec as a struct cros_ec_device and calls cros_ec_cmd() on it for every USB-C PD host event. Plugging or unplugging a charger then intermittently oopses, followed by soft lockups and a hung system: BUG: unable to handle page fault for address: ffffffff9cf03220 #PF: supervisor write access in kernel mode Hardware name: Google Nami/Nami, BIOS 09/19/2019 Workqueue: kacpi_notify acpi_os_execute_deferred RIP: 0010:native_queued_spin_lock_slowpath+0x29d/0x330 Call Trace: _raw_spin_lock_irqsave+0x59/0x80 __mutex_lock.constprop.0+0x129/0x930 cros_ec_cmd_xfer+0x2a/0xf0 [cros_ec_proto] cros_ec_cmd_xfer_status+0x1a/0x90 [cros_ec_proto] cros_ec_cmd+0xb7/0x140 [cros_ec_proto] cros_usbpd_get_event_and_notify+0x42/0xc0 [cros_usbpd_notify] acpi_ev_notify_dispatch+0x4e/0x70 acpi_os_execute_deferred+0x1a/0x30 Only read the parent's driver data when the parent's ACPI node is GOOG0004, and otherwise continue without an EC pointer. While at it, drop the reference taken by fwnode_get_parent(). |
| CVE-2026-99580 | Unknown | 2026-11-20 | Not applicable | No public exploit | In the Linux kernel, the following vulnerability has been resolved: mm/userfaultfd: only allocate anon_vma in CoW mappings find_vma_and_prepare_anon() can end up allocating an anon_vma in VMAs that are not CoW mappings, which is wrong. If we have a MAP_SHARED R/O file mapped, we lack VM_SHARED (but do have VM_MAYSHARE) and lack VM_MAYWRITE. While uffd later rejects such mappings (uffd registration requires VM_MAYWRITE, see comment in validate_dst_vma) find_vma_and_prepare_anon() still wrongly allocates an anon vma before it validates the vma. This in turn later confuses copy_page_range()->vma_needs_copy() such that we end up calling copy_hugetlb_page_range() with ranges that actually do not contain *any* per-pagetable information that would require copying, which is the basis for PMD-table sharing in the first place. copy_hugetlb_page_range() should not have to worry about shared PMD tables at all: it doesn't make any sense to copy page tables that are shared, as they can be fully recreated later. Ending up in the function with shareable page tables is the real issue. If a destination PMD table is shared in copy_hugetlb_page_range(), it might get concurrently unshared as we are not holding relevant locks, resulting in us using a page table that is no longer mapped and possibly freed after calling: dst_pte = huge_pte_alloc(dst, dst_vma, addr, sz); To fix it, do not allocate an anon_vma in non-CoW mappings and add a safety guard to copy_hugetlb_page_range(), making sure that we never end up messing with shared PMD tables in there. Before commit 867a43a34ff8a ("userfaultfd: use per-vma locks in userfaultfd operations") we would always validate the VMA before allocating an anon_vma, and consequently never wrongly allocate an anon_vma. As uffd_lock_vma() is part of the same lookup machinery and also contains a misleading VM_SHARED check, change that one as well directly for consistency. A follow-up cleanup will stop taking the hugetlb_vma_lock_read(src_vma) lock in copy_hugetlb_page_range() entirely. Further, the usage of VM_SHARED in userfaultfd code should be cleaned up later to focus on CoW vs. non-CoW mappings. |
| CVE-2026-99579 | Unknown | 2026-11-20 | Not applicable | No public exploit | In the Linux kernel, the following vulnerability has been resolved: mm/shmem: honour F_SEAL_EXEC when an ACL is set The owner of a memfd sealed with F_SEAL_EXEC can still change its execute bits by setting a POSIX access ACL. With CONFIG_TMPFS_POSIX_ACL, this lets an unprivileged owner make a non-executable memfd executable, bypassing vm.memfd_noexec=2. simple_set_acl() updates i_mode directly, bypassing the seal check in shmem_setattr(). Add shmem_set_acl() to check the resulting mode. Share the F_SEAL_EXEC check with shmem_setattr() using memfd_check_seals_mode() in include/linux/memfd.h. Fix generated by an LLM and sent by Chris Mason in private. [ david: use common helper; simplify description ] |
| CVE-2026-99578 | Unknown | 2026-11-20 | Not applicable | No public exploit | In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: usb: route bmc frames via the high queue only for DTIM delivery In AP mode every broadcast and multicast data frame is routed to TX_DESC_QSEL_HIGH, the after-DTIM queue, whether or not anybody is asleep. The firmware drains that queue at beacon pace, a dozen or so frames per second measured on RTL8822BU, while one associated client's mDNS/SSDP chatter alone exceeds that. The excess accumulates inside the chip until the shared TX page pool is exhausted (measured: 14 of 1803 pages left). From that point every host-sourced frame queues behind the backlog: authentication responses reach the air seconds after the client has given up, so no station can associate anymore, and the beacon reserved-page download fails the BCN_VALID poll ("error beacon valid") because it needs pages from the same pool. The AP keeps beaconing, so the failure looks like a silent RX stall and only a reboot recovers. mac80211 already decides when after-DTIM delivery is needed: it sets IEEE80211_TX_CTL_SEND_AFTER_DTIM on bmc frames only while at least one station is actually dozing. Honor that instead of routing unconditionally: flagged frames keep going through the high queue with the MORE_DATA and HGQMD handling introduced by commit 076f786a0ae1 ("wifi: rtw88: Fix AP mode incorrect DTIM behavior"), everything else leaves at line rate through the AC queues. This partially reverts the usb.c hunk of that commit, whose unconditional routing is what lets the backlog build up. On a bench AP (USB2, 20 MHz, WPA2, hostapd, a Windows client driven through disconnect/reconnect cycles): reconnects fail 0/5 on RTL8822BU and 0/3 on RTL8821CU before this change, and pass 10/10 and 5/5 with it, with the page pool staying healthy and no beacon errors logged. |
| CVE-2026-99577 | Unknown | 2026-11-20 | Not applicable | No public exploit | In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: usb: bound what the driver feeds the after-DTIM queue Frames routed to the high queue are transmitted right after DTIM beacons only, inside the ATIM window, while they wait in the shared TX page pool. The driver puts no limit on how many it hands over, so as long as one station dozes, any sustained broadcast or multicast traffic outruns the drain and empties the pool: measured on an RTL8822BU AP with a single client in power save and ~40 frames/s of mDNS chatter, the free page count at 0x240 goes from 1803 to 16 in about 100 seconds and stays there for as long as the traffic lasts. From that point every other transmit queues behind the backlog, authentication responses arrive too late for anyone to join, and the reserved page download fails ("error beacon valid"). The AP keeps beaconing and only a reboot recovers. Feed the high queue through a small budget that refills below the measured drain rate (about 3 frames per DTIM, ~15/s at dtim_period 2 on the default 2 TU ATIM window); whatever exceeds the budget leaves on its access category queue right away. The high queue backlog is now bounded by the burst size under any load, so the page pool cannot run dry, at the price that a dozing station may miss part of a broadcast storm. |
| CVE-2026-99576 | Unknown | 2026-11-20 | Not applicable | No public exploit | In the Linux kernel, the following vulnerability has been resolved: f2fs: zone: fix to avoid bio split on sequential zone In the block layer, bio_split_to_limits() splits a bio if it exceeds any underlying queue limits: 1. queue_max_sectors: Splits bios larger than the transfer limit. This limit is set by the device driver/DMA controller (max_hw_sectors) and device-mapper targets. When flushing dirty pages (governed by VFS writeback_chunk_size() and f2fs nr_pages_to_skip()), f2fs merges contiguous pages into bios up to 512KB (1024 sectors) or more without checking queue_max_sectors, which will be split if the device or DM target enforces a smaller limit. 2. queue_max_segments: Splits bios exceeding scatter-gather segment limits. f2fs allocates bios with up to 256 pages, exceeding the 128-segment limit of DM targets (dm-default-key/dm-crypt) if pages are discontiguous. 3. chunk_sectors: Splits bios crossing chunk/zone boundaries. In f2fs, section_size strictly matches zone_size, and block allocation never spans across section boundaries, so bios never cross chunk_sectors. Crucially, when bio_split_to_limits() splits a bio, bio_submit_split() submits the tail half via submit_bio_noacct() before returning the head half to the caller. On a sequential zoned device, this causes the tail bio to arrive at the zone write plug before the head: dm-3: zone 7: prepare_bio wp mismatch: bio sector 30720 offset 2048 != wp_offset 248, len 248 The write plug rejects the out-of-order tail with BLK_STS_IOERR, causing f2fs_stop_checkpoint() and remounting the filesystem read-only: 2026-09-30T22:09:23.725678+08:00 localhost kernel: CPU: 9 UID: 0 PID: 243 Comm: kworker/9:1H Not tainted 6.12.81-gb3ef518fb26d #5 2026-09-30T22:09:23.725750+08:00 localhost kernel: Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 2026-09-30T22:09:23.725753+08:00 localhost kernel: Workqueue: dm-3_zwplugs blk_zone_wplug_bio_work 2026-09-30T22:09:23.725756+08:00 localhost kernel: Call Trace: 2026-09-30T22:09:23.725758+08:00 localhost kernel: <TASK> 2026-09-30T22:09:23.725758+08:00 localhost kernel: dump_stack_lvl+0x4d/0x70 2026-09-30T22:09:23.725759+08:00 localhost kernel: f2fs_stop_checkpoint+0x1df/0x5d0 2026-09-30T22:09:23.725759+08:00 localhost kernel: ? blk_zone_wplug_bio_work+0x4eb/0x740 2026-09-30T22:09:23.725760+08:00 localhost kernel: f2fs_cache_write_end_io+0x545/0x6e0 2026-09-30T22:09:23.725761+08:00 localhost kernel: blk_zone_wplug_bio_work+0x4eb/0x740 2026-09-30T22:09:23.725762+08:00 localhost kernel: process_one_work+0x5c6/0xde0 2026-09-30T22:09:23.725764+08:00 localhost kernel: ? assign_work+0x124/0x4e0 2026-09-30T22:09:23.725765+08:00 localhost kernel: worker_thread+0x403/0xb70 2026-09-30T22:09:23.725765+08:00 localhost kernel: ? __kthread_parkme+0x82/0x140 2026-09-30T22:09:23.725766+08:00 localhost kernel: ? __pfx_worker_thread+0x10/0x10 2026-09-30T22:09:23.725766+08:00 localhost kernel: kthread+0x235/0x2e0 2026-09-30T22:09:23.725767+08:00 localhost kernel: ? recalc_sigpending+0x128/0x1d0 2026-09-30T22:09:23.725767+08:00 localhost kernel: ? __pfx_kthread+0x10/0x10 2026-09-30T22:09:23.725769+08:00 localhost kernel: ret_from_fork+0x2f/0x70 2026-09-30T22:09:23.725769+08:00 localhost kernel: ? __pfx_kthread+0x10/0x10 2026-09-30T22:09:23.725770+08:00 localhost kernel: ret_from_fork_asm+0x1a/0x30 2026-09-30T22:09:23.725771+08:00 localhost kernel: </TASK> 2026-09-30T22:09:23.725771+08:00 localhost kernel: F2FS-fs (dm-0): Stopped filesystem due to reason: 3 To prevent write bios destined for sequential zones from being split: 1. In __bio_alloc(), bound npages to bdev_max_segments(bdev) for writes to sequential zone areas. 2. In page_is_mergeable(), check queue_max_segments() and queue_max_sectors() for sequential zone areas, so f2fs will not merge beyond the queue limits. |
| CVE-2026-99575 | Unknown | 2026-11-20 | Not applicable | No public exploit | In the Linux kernel, the following vulnerability has been resolved: f2fs: return -EIO for a lost inode block after cp_error After cp_error, dirty node caches are dropped without being written. If such an inode was never written, its NAT entry is still NEW_ADDR, and reading its inode block returns -ENOENT. f2fs_get_dnode_of_data() passes that -ENOENT up, and callers take it as a hole. Since the inode block is missing, the next offset can only advance one block, so fiemap walks block by block up to maxbytes, about 2^30 blocks, while holding the inode lock. It took hours in a power-off recovery test after shutdown and blocked unlink and umount on the file. Return -EIO instead of -ENOENT when the inode block itself is missing after cp_error or shutdown. A missing direct or indirect node is still reported as -ENOENT. |
| CVE-2026-99574 | Unknown | 2026-11-20 | Not applicable | No public exploit | In the Linux kernel, the following vulnerability has been resolved: f2fs: bound the SIT/NAT bitmaps by the checkpoint pack sit_ver_bitmap_bytesize and nat_ver_bitmap_bytesize are used as memcpy lengths into and out of sbi->ckpt, which is sized from cp_payload alone, and nothing compares either length against that allocation. sanity_check_ckpt() has checked these two fields since c77ec61ca0a4, which added them after a crafted image overran build_sit_info(). That check ties each length to a segment count; it never compares either against the allocation, which is the half this adds. Mounting over-reads in build_sit_info() and build_node_manager(), and the first checkpoint writes the same lengths back through the same pointers, so the over-read's contents reach the on-disk checkpoint. An unmount is enough; the filesystem does not have to be used. Bound both ends the way __bitmap_ptr() lays them out. The three branches differ, so a single sum of the two lengths would still admit a small overflow when cp_payload is non-zero. |
| CVE-2026-99573 | Unknown | 2026-11-20 | Not applicable | No public exploit | In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic: Stop the target vcpu when disabling LPIs Disabling LPIs is pretty nasty, as it directly messes with the AP list of the affected CPU, which could be running... This has the potential to lead to really bad behaviours, and we should not be doing that. Take example on the way the Active state is handled and simply pause the the vcpu so that we are sure it is in a quiescent state, and the state be safely manipulated. Nobody has any expectation of performance for this anyway. |
| CVE-2026-99572 | Unknown | 2026-11-20 | Not applicable | No public exploit | In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid potential reference count leak in do_garbage_collect() In do_garbage_collect(), we have reserved reference counts on summary cache of all segments, once gc_thread encounter freezing, we need to release all reference counts. |
| CVE-2026-99571 | Unknown | 2026-11-20 | Not applicable | No public exploit | In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: Validate the queue state under the queue lock in the address attribute Reading the "address" sysfs attribute calls kernel_getsockname() on the admin queue socket, which can race with the queue teardown during connection error recovery: a reader can observe NVME_TCP_Q_LIVE set, then block on the queue lock while nvme_tcp_free_queue() releases the socket and clears queue->sock without holding the lock. Once the reader acquires the lock it dereferences the NULL socket pointer. Commit 76d54bf20cdc ("nvme-tcp: don't access released socket during error recovery") had the queue liveness check inside the lock. Commit 782373ba2766 ("nvme: tcp: avoid race between queue_lock lock and destroy") moved it back out because the lock itself is destroyed in nvme_tcp_free_queue(), so a reader arriving late trips mutex_destroy(). Check the queue liveness inside the queue lock, and clear queue->sock under the same lock. The teardown clears NVME_TCP_Q_LIVE under the lock well before the socket is released, so a reader either sees the bit cleared or a socket that cannot be released while it holds the lock. To also close the lock lifetime race, the queue locks are now owned by the controller: they are initialized with the queue array and only destroyed when the controller is freed, which cannot happen while a sysfs attribute read is still in progress. The queue count is computed by the NVME_TCP_OPT_NR_QUEUES() macro from the original connect options for both initialization and destruction, as reconnects may shrink ctrl->queue_count. |
| CVE-2026-99570 | Unknown | 2026-11-20 | Not applicable | No public exploit | In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to invalidate curseg if change_curseg() fails Our consistency stress test (fsstress + fio + atomic write workers + "f2fs_io shutdown 1") triggers below kernel BUG: F2FS-fs (vdd): Stopped filesystem due to reason: 0 ------------[ cut here ]------------ kernel BUG at fs/f2fs/segment.c:3989! Oops: invalid opcode: 0000 [#1] SMP KASAN PTI Workqueue: writeback wb_workfn (flush-253:48) RIP: 0010:f2fs_allocate_data_block+0x257a/0x38e0 Call Trace: <TASK> do_write_block+0x155/0xc10 f2fs_outplace_write_data+0x192/0x340 f2fs_do_write_data_page+0xc57/0x1880 f2fs_write_single_data_page+0xda9/0x15a0 f2fs_write_cache_pages+0x973/0x1f20 __f2fs_write_data_pages+0x6c4/0x1890 do_writepages+0x21e/0x560 __writeback_single_inode+0x119/0x11b0 writeback_sb_inodes+0x67d/0x17a0 wb_writeback+0x207/0x820 wb_workfn+0x128/0xc30 process_one_work+0x925/0x1600 worker_thread+0x60a/0xff0 kthread+0x35f/0x460 ret_from_fork+0x474/0x7e0 ret_from_fork_asm+0x1a/0x30 </TASK> The BUG is f2fs_bug_on(sbi, curseg->next_blkoff >= BLKS_PER_SEG(sbi)) in f2fs_allocate_data_block(), next_blkoff was 512. The root cause is a race in between atomic write commit and shutdown as below: Thread A (commit atomic write) Thread B (shutdown) Thread C (writeback) - f2fs_ioc_commit_atomic_write - f2fs_commit_atomic_write - __f2fs_commit_atomic_write - __replace_atomic_write_block - f2fs_replace_block - __f2fs_replace_block - f2fs_ioc_shutdown - f2fs_do_shutdown : F2FS_GOING_DOWN_METASYNC - f2fs_sync_fs - f2fs_write_single_data_page : pass f2fs_cp_error() check - f2fs_stop_checkpoint : set CP_ERROR_FLAG - change_curseg - reset_curseg : curseg->segno = new_segno : curseg->alloc_type = SSR : curseg->next_blkoff = __next_free_blkoff() which is BLKS_PER_SEG if there is no free slot in new_segno - f2fs_get_sum_cache : return -EIO due to f2fs_cp_error() : return error w/o restoring curseg : goto out_unlock, skip restoring old segno, blkoff and alloc_type - f2fs_do_write_data_page - f2fs_outplace_write_data - do_write_block - f2fs_allocate_data_block : curseg->segno is valid : f2fs_bug_on(next_blkoff >= BLKS_PER_SEG) Since commit 86f33603f8c5 ("f2fs: handle errors of f2fs_get_meta_page_nofail"), change_curseg() can fail after the curseg has already been switched to the new segment, then the curseg is left in an inconsistent state: it points to a segment which may have no free slot, its summary block is zeroed, and the caller can not restore it. Subsequent block allocation on the curseg will trigger the BUG. Moreover, the writeback thread dies with curseg_lock, curseg_mutex and sentry_lock held, so the commit, shutdown and other I/O threads hang in D state. Since change_curseg() only fails once CP_ERROR_FLAG is set, no checkpoint will be committed afterward, let's invalidate the curseg via reset_curseg_fields() on failure, as new_curseg() does for -ENOSPC, then f2fs_allocate_data_block() will fail with -ENOSPC on the curseg instead of triggering BUG, and do_write_block() can handle the error since CP_ERROR_FLA ---truncated--- |
| CVE-2026-99569 | Unknown | 2026-11-20 | Not applicable | No public exploit | In the Linux kernel, the following vulnerability has been resolved: f2fs: release a removed xattr node in roll-forward recovery When xattrs shrink enough to fit in the inline xattr area, write_all_xattrs() truncates the xattr node and clears i_xattr_nid. If the file is then fsynced without a checkpoint, only the inode block is written, with i_xattr_nid of 0. Roll-forward recovery starts from the checkpointed inode, whose i_xattr_nid still points to the old xattr node. f2fs_recover_inline_xattr() copies only the inline xattr area, and f2fs_update_inode() writes the old i_xattr_nid back. So the inode keeps the stale xattr node: - The node block is never released, and fsck reports "nonzero bytes in xattr space after end of list". - If the inline xattr list ends exactly at the end of the inline area, its terminator is read from the stale node, and the removed xattrs come back after recovery. When the fsynced inode has no xattr node but the checkpointed one has, release the old xattr node as truncate_node() does: check its block address, invalidate the block and drop its node cache, which may still be dirty. |
| CVE-2026-99568 | Unknown | 2026-11-20 | Not applicable | No public exploit | In the Linux kernel, the following vulnerability has been resolved: iommufd/iova_bitmap: Ensure that iova_bitmap_set() handles the full IOVA Generally userspace is going to step the dirty bitmap through the IOVA space. However if the bitmap ends in the middle of a large PTE this is problematic. The first step will clear the dirty bit and report dirty to the end of its bitmap while the second step will see the clear'd dirty and report clean for the start of the bitmap. If it happens this ends up losing dirties. Further this function is missing bounds checking so if this does happen ther is a good chance it will write memory beyond what the userspace was expecting. Return an error code if this illegal condition happens. |
| CVE-2026-99567 | Unknown | 2026-11-20 | Not applicable | No public exploit | In the Linux kernel, the following vulnerability has been resolved: assoc_array: don't chain a new shortcut onto an existing one When a full node's leaves and the new key all share the node's segment, assoc_array_insert_into_terminal_node() replaces the node with a shortcut to a pair of new nodes. If the node is itself the target of a shortcut, the new shortcut is installed as that shortcut's next node, and a shortcut leading to a shortcut is something nothing expects: assoc_array_walk() indexes the second one as a node, and assoc_array_apply_edit() hits the BUG_ON() in the loop that adjusts nr_leaves_on_branch, on that same insertion. Deletion gets a node there. When the subtree below a shortcut shrinks enough, assoc_array_delete() collapses it into one node below the shortcut, and the leaves it collects can all share that node's segment. The next key that shares it too takes this path. Eighteen insertions and a deletion are enough: sixteen keys that agree on bits 0-11, one that leaves them at bit 8 and is deleted again, and one more that agrees with the sixteen. Have the new shortcut replace the one in front of the node as well. assoc_array_insert_shortcut() gives it that shortcut's back pointer and parent slot, so the caller installs it where that one was, and excises the old shortcut along with the node, which takes a second entry in excised_meta[]. The new shortcut's index key comes from the new key up to the new skip level, so it covers what the old one did. Found by a userspace test doing random insertions and deletions on keys that share long prefixes; a targeted case builds a shortcut, deletes down to the collapse and inserts one more key. |
| CVE-2026-99566 | Unknown | 2026-11-20 | Not applicable | No public exploit | In the Linux kernel, the following vulnerability has been resolved: assoc_array: keep gc's cleanup out of the live tree on allocation failure assoc_array_gc() builds a copy of the tree. Where the copy reaches a shortcut, it allocates the copy of the shortcut with kmalloc_flex(), fills it with memcpy(), links it into the new tree, and only then allocates the copy of the node after it. The memcpy() leaves the new shortcut's next_node pointing at the old tree's node, so if that second allocation fails, the cleanup, assoc_array_destroy_subtree() on the new tree, follows the new shortcut into the old tree, and the BUG_ON() on the old node's back pointer fires. Allocate the node first, and the shortcut once the node exists, freeing the node again if the shortcut cannot be allocated. A copied shortcut is then only linked into the new tree when the copy of its node is there to follow it. Nothing else changes: with no allocation failing, the trees gc builds are the same as before. Found by a userspace test that makes each allocation of each operation fail in turn. |
| CVE-2026-96771 | High | 2026-11-20 | Not applicable | No public exploit | The Hydrogen Calendar Embeds plugin for WordPress is vulnerable to Stored DOM-Based Cross-Site Scripting via ICS Feed Event Fields (SUMMARY/DESCRIPTION/LOCATION) in all versions up to, and including, 3.0.3 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This requires the attacker to have write access to an ICS feed that has been configured as a calendar source on the target WordPress site. |
| CVE-2026-96295 | Unknown | 2026-11-20 | Not applicable | No public exploit | Authenticated users can bypass normal controls on the reading and writing of workflow execution results. This allows any authenticated user to read or modify any other user's workflow execution results. This issue affects Apache Texera (incubating): from 1.1.0-incubating before 1.3.0-incubating. Users are recommended to upgrade to version 1.3.0-incubating, which fixes the issue. |
| CVE-2026-89095 | High | 2026-11-20 | Not applicable | No public exploit | The Shortcodes and extra features for Phlox theme plugin for WordPress is vulnerable to Local File Inclusion in all versions up to, and including, 2.17.22 via the 'extra_template_path' parameter parameter. This makes it possible for unauthenticated attackers to include and execute arbitrary .php files on the server, allowing the execution of any PHP code in those files. This can be used to bypass access controls, obtain sensitive data, or achieve code execution in cases where .php file types can be uploaded and included. The slug-based allowlist introduced as the fix for CVE-2023-37888 constrains only the template_part_file filename suffix and does not validate the extra_template_path directory component, meaning path traversal sequences are fully functional against this parameter. |
| CVE-2026-86587 | Medium | 2026-11-20 | Not applicable | No public exploit | Certain EZVIZ devices are affected by an improper certificate validation issue (CWE-295). An attacker may intercept communication traffic to conduct a man-in-the-middle attack. |
| CVE-2026-86586 | Medium | 2026-11-20 | Not applicable | No public exploit | Certain EZVIZ devices are affected by a replay attack vulnerability (CWE-294). An attacker may intercept communication traffic and replay specific control commands, causing the device to execute unauthorized operations. |
| CVE-2026-82091 | Low | 2026-11-20 | Not applicable | No public exploit | The Canva Desktop App before 1.128.0 stores encrypted application state on disk. The encryption key is hardcoded as a plaintext string in the main.js file and is identical across all Canva installations on Windows and macOS. |
| CVE-2026-65094 | Critical | 2026-11-20 | Not applicable | No public exploit | NVIDIA VIRTIO-Net for Bluefield contains a vulnerability in Virtio-Net where a VM user may cause a Write-What-Where condition by crafted message. A successful exploit of this vulnerability may lead to Code Execution in Virtio-Net scope. |
| CVE-2026-24205 | Medium | 2026-11-20 | Not applicable | No public exploit | NVIDIA TensorRT-LLM for any platform contains a vulnerability where a user may cause a race condition by running concurrent requests. A successful exploit of this vulnerability may lead to data tampering. |
| CVE-2026-22062 | Low | 2026-11-20 | Not applicable | No public exploit | StorageGRID (formerly StorageGRID Webscale) versions 12.1.0 and higher are susceptible to an information exposure vulnerability which allows a remote unauthenticated attacker to acquire low-sensitivity credentials via a Man-in-the-middle attack when certain non-default features are enabled. |
| CVE-2026-15223 | Medium | 2026-11-20 | Not applicable | No public exploit | An improper export control defect in ChatEventDispatchActivity (com.vivo.agent.business.chatmode.activity.ChatEventDispatchActivity) of Vivo Assistant allows a local malicious application to execute voice commands without user interaction via a crafted Intent, which may lead to unauthorized phone calls, SMS sending, access to private data such as location and calendar entries, and modification of system settings |
| CVE-2026-133710 | High | 2026-11-20 | Not applicable | No public exploit | llama.cpp b11003 before b12556 contains an integer overflow in the hrm_text loader load_arch_hparams() that allows attackers to bypass the block count check using crafted GGUF metadata. Attackers can supply a GGUF model whose layer factors wrap modulo 2^32, causing load_arch_tensors() to write tensor pointers past model.layers, corrupting heap memory and potentially enabling code execution. |
| CVE-2026-133709 | Medium | 2026-11-20 | Not applicable | No public exploit | C-Blosc2 before 3.4.1 contains a heap-based out-of-bounds read vulnerability in frame_decompress_chunk() because sparse frame chunk cbytes are not checked against the actual chunk file size. Attackers can supply a sparse frame directory with a truncated or crafted chunk file to crash applications or leak adjacent heap memory into decompressed output. |
| CVE-2026-133708 | High | 2026-11-20 | Not applicable | No public exploit | diffpy.structure before 3.5.1 contains a code execution vulnerability that allows attackers to run Python code by supplying crafted CIF symmetry operations passed to eval() in get_symop(). Attackers can embed expressions in the _space_group_symop_operation_xyz or _symmetry_equiv_pos_as_xyz loop to execute code with victim privileges when the CIF file is parsed locally. |
| CVE-2026-133707 | High | 2026-11-20 | Not applicable | No public exploit | The targets R package before 1.12.1 contains a code execution vulnerability that allows attackers to run arbitrary R code by planting format functions in the data store metadata file. Attackers can supply a crafted _targets data store whose custom format or CAS repository functions are passed to eval(parse()), executing code when victims call tar_read(), tar_load() or tar_workspace(). |
| CVE-2026-133706 | Medium | 2026-11-20 | Not applicable | No public exploit | request-filtering-agent before 3.2.2 contains a server-side request forgery filter bypass because address validation in src/request-filtering-agent.ts treats IPv4-compatible IPv6 addresses in the ::/96 range as public unicast. Attackers controlling a fetched URL can use addresses like ::7f00:1 or ::a9fe:a9fe to reach loopback or link-local services, including cloud metadata endpoints. |
| CVE-2026-133705 | High | 2026-11-20 | Not applicable | No public exploit | Hanko before 3.2.0 contains an open redirect vulnerability in Saml.IsAllowedRedirect that allows unauthenticated attackers to bypass the redirect allowlist by appending attacker-controlled domain suffixes to allowed hostnames. Attackers can lure victims through a crafted /saml/auth login link to capture the one-time hanko_token and redeem it without PKCE to hijack the victim's session. |
| CVE-2026-133704 | Medium | 2026-11-20 | Not applicable | No public exploit | Penpot 2.18.0 before 2.18.2 contains a stored cross-site scripting vulnerability that allows authenticated users with edit rights to bypass the sanitize-svg-element blocklist using namespace-prefixed SVG elements. Attackers can upload SVGs containing elements like x:script or attributes like x:onload, which are served inline as image/svg+xml to run JavaScript in victims' Penpot sessions. |
| CVE-2026-133703 | Medium | 2026-11-20 | Not applicable | No public exploit | Open5GS AMF through 2.8.0 contains a resource leak vulnerability that allows authenticated UEs to exhaust the session pool by triggering failed DNN or S-NSSAI validation. Attackers can repeat PDU Session Establishment Requests with different PDU Session Identity values, leaving stale amf_sess contexts that degrade service for other subscribers. |
| CVE-2026-133702 | Medium | 2026-11-20 | Not applicable | No public exploit | free5GC PCF through 1.4.6 contains a resource leak in postAppSessCtxProcedure that leaves PCC rules and QoS data in the SM policy decision after rejected Npcf_PolicyAuthorization create requests. Authenticated AFs knowing an active PDU session's UE address can send repeated failing requests with distinct AF application identifiers to grow PCF memory and pollute policy sent to the SMF. |
| CVE-2026-133701 | Low | 2026-11-20 | Not applicable | No public exploit | free5GC SMF through 1.4.6 contains a resource exhaustion vulnerability in HandlePDUSessionSMContextLocalRelease that orphans SM contexts and UE IP addresses when PFCP session deletion fails. Attackers can send repeated PDU session establishment requests reusing an existing SUPI and PDU Session ID during PFCP deletion failures to exhaust the DNN's UE IP pool. |
| CVE-2026-133700 | Low | 2026-11-20 | Not applicable | No public exploit | free5GC SMF through 1.4.6 contains a resource leak vulnerability in HandlePDUSessionSMContextCreate that leaves SM contexts unreleased when UDM access token retrieval fails. Attackers can trigger repeated PDU session establishment attempts while the NRF is unreachable, causing empty 200 responses and persistent SMF memory growth. |
| CVE-2026-133699 | Low | 2026-11-20 | Not applicable | No public exploit | free5GC SMF through 1.4.6 contains a resource exhaustion vulnerability because sendPDUSessionEstablishmentAccept returns early without calling RemoveSMContextFromAllNF on failures. Authenticated UEs repeatedly establishing PDU sessions during NRF or AMF failures leak SM contexts, UE IP addresses and TEIDs, exhausting the DNN IP pool. |
| CVE-2026-133667 | Medium | 2026-11-20 | Not applicable | No public exploit | flowintel contains multiple related flaws that allow an authenticated attacker to inject arbitrary HTML or script into pages viewed by other users. - Timeline rendering: the timeline library's autolinking feature rewrote already-sanitised case notes and imported MISP attribute values into generated HTML link elements. Crafted text containing quote characters could break out of the generated attribute context, altering the surrounding markup and enabling script execution in the victim's browser. - Search highlighting: the highlight injection logic used a regular expression to locate text between angle brackets and spliced <mark> elements into the resulting string. Because the pattern could match inside HTML attribute values, the rewrite could corrupt or inject content into attributes of already-sanitised markup, again leading to DOM-based cross-site scripting. - Content-Type confusion: three analyser selection endpoints returned session-stored JSON strings with a text/html content type. A browser receiving such a response will parse and render the body as HTML, so any HTML or script embedded in the stored value is executed in the victim's context. Preconditions: the attacker must be an authenticated user with the ability to create or import case content (notes, MISP attributes) containing specially crafted quote or angle-bracket sequences. The victim must subsequently open the affected case timeline, run a search, or request one of the selection endpoints. Impact: successful exploitation yields DOM-based cross-site scripting in the victim's browser session, potentially allowing disclosure of case data, session manipulation, or execution of arbitrary actions under the victim's identity. Affected versions: flowintel prior to 4.1.0. |
| CVE-2026-133665 | High | 2026-11-20 | Not applicable | No public exploit | flowintel contains an information disclosure vulnerability that allows authenticated non-administrative users to access sensitive configuration data and logs intended for administrators only. The notification page and alert API responses exposed sensitive fields, including webhook URLs, signing secrets, IMAP credentials, and delivery logs, in the initial data or JSON responses. Although the user interface hid the configuration form from non-admin users, the underlying data remained accessible via the page source or API endpoints. This exposure included historical webhook URLs that may contain active bearer tokens. An attacker with a valid non-admin account could retrieve these credentials and logs, potentially leading to unauthorized access to notification services, impersonation of the application in webhook deliveries, or further lateral movement within the infrastructure. Affected versions: flowintel < 4.1.0 |
| CVE-2026-133663 | High | 2026-11-20 | Not applicable | No public exploit | flowintel contains an Insecure Direct Object Reference (IDOR) vulnerability affecting multiple endpoints that manage child records of cases and tasks. An authenticated user with access to one case or task could read or modify records belonging to other cases by supplying identifiers of those records directly in the request. Affected operations include: - Reading task notes, subtasks, and URL tools by referencing their IDs without verifying they belong to the authorized task - Retrieving task assignees for a task belonging to a different case - Editing or deleting timeline events and timeline event links belonging to another case - Editing or removing case connectors belonging to another case - Invoking connector module operations (MISP, generic connectors, worker calls) by combining an authorized case with a connector link from a different case The root cause is that the application authorized the parent resource (case or task) in the URL but then fetched or operated on the child record independently without verifying the child's ownership relationship to the authorized parent. Security impact: an authenticated user can exfiltrate sensitive threat intelligence data from cases they do not have access to, and can modify or delete timeline entries, connector configurations, and other records in unauthorized cases, leading to data integrity loss and potential disruption of incident response workflows. Affected versions: flowintel prior to 4.1.0 |
| CVE-2026-133662 | High | 2026-11-20 | Not applicable | No public exploit | flowintel contains multiple authorization bypass vulnerabilities in its Analyzer (MISP Modules) functionality, affecting both the web interface and the REST API. - Saving analyzer results to a case or task accepted caller-supplied case and task identifiers without verifying that the authenticated user is a member of the target case or holds the required restricted-task permissions. An authenticated user could write notes, create tasks, and attach MISP objects or attributes into another organization's case. - Stored analyzer results were retrievable by UUID by any authenticated user. Both the web endpoint and the API endpoint returned the full result payload without checking ownership, exposing another user's analysis output. - The save handler did not validate the structure of the request, did not reject conflicting destination selections, and did not halt processing when a task-note operation failed, allowing partial or unintended writes. Preconditions: the attacker must possess a valid authenticated session (or API token) in flowintel. No administrative role is required. Security impact: unauthorized cross-tenant data disclosure (analyzer results) and unauthorized cross-tenant data modification (notes, tasks, MISP objects/attributes in another organization's case). Affected versions: flowintel prior to 4.1.0. |
| CVE-2026-133661 | Medium | 2026-11-20 | Not applicable | No public exploit | FlowIntel contains multiple authorization and credential management vulnerabilities affecting connector instances, MISP helper tools, and case templates. - Connector instance metadata, connectivity checks, and case listings accepted instance IDs without verifying if the acting user had visibility or ownership rights, allowing unauthorized access to sensitive configuration and data. - Case template serialization and creation processes exposed connector instances attached to templates regardless of the user's permissions, potentially leaking credentials or instance details to users who should not have access. - Editing connector instances allowed changes to URLs or sharing scopes without requiring re-authentication of API keys, enabling the reuse of another user's credentials in a new context or the leakage of shared keys to unauthorized endpoints. - Outbound MISP connector keys were incorrectly accepted for authenticating incoming alerts, bypassing the intended separation between outbound integration credentials and inbound alert source authentication. These issues allow authenticated users to access unauthorized connector data, manipulate credential scopes, and potentially exploit credential confusion between different security contexts. Affected versions: < 4.1.0 |
| CVE-2026-133660 | High | 2026-11-20 | Not applicable | No public exploit | FlowIntel contains an authorization bypass in its user directory and assignment endpoints that allows authenticated users to access data belonging to other organisations. When the LIMIT_USER_VIEW_TO_ORG setting is enabled to restrict directory visibility to the caller's organisation, several API endpoints (user lookup by ID, last name, Matrix ID, and role-based listings) did not consistently enforce the organisation boundary. An authenticated non-admin user could retrieve profiles of users in other organisations by supplying their identifiers. Additionally, OrgAdmin users could retrieve the task assignments of any user in the system, including tasks and case titles from private cases to which they had no access. The assignment endpoints did not verify that the requested user belonged to the caller's organisation or that the underlying cases were visible to the caller. Security impact: - Exposure of user identities (names, Matrix IDs, roles) across organisation boundaries - Disclosure of task assignments, case titles, and workflow details from private cases - Potential enumeration of other organisations' membership and case activity Affected versions: FlowIntel prior to 4.1.0 |
| CVE-2026-133659 | High | 2026-11-20 | Not applicable | No public exploit | Flowintel contains multiple SSO identity and organisation trust boundary violations that collectively allow account takeover, privilege escalation, and unauthorized access to private case data. - Keycloak SSO accepted unverified email claims, and all SSO providers (Keycloak, Entra ID, SimpleSAML) could resolve a claimed email address to an existing account that was created via a different sign-in method, enabling cross-provider account collision and unauthorized access to another user's account and data. - Entra ID role mapping relied on group display names, which tenant members could duplicate by creating a group with the same name as a privileged group (e.g. FlowintelAdmin), resulting in unauthorized role escalation. - SSO provisioning reused organisations whose display names matched user-controlled profile names, granting the new SSO user access to that organisation's private cases without explicit administrator assignment. - Case sharing via the API resolved organisations by name using a first-match query, so ambiguous names could silently resolve to the wrong organisation. Preconditions: an attacker must have a valid SSO identity (Keycloak, Entra ID, or SimpleSAML) or be a member of the relevant Entra tenant. No local administrator access is required. Security impact: unauthorized access to private case data, privilege escalation to Editor or higher roles, and account takeover across authentication providers. Affected versions: Flowintel prior to 4.1.0. |
| CVE-2026-133658 | Medium | 2026-11-20 | Not applicable | No public exploit | Flowintel contains a privilege escalation vulnerability in its Matrix relay (bot) integration. When the relay forwarded API requests on behalf of a represented user, the authorization and permission checks evaluated the relay bot's elevated role while the request handlers acted as the lower-privileged represented user. This mismatch allowed users with restricted roles (e.g., Read Only) to perform write operations, directory lookups, calendar modifications, assignment changes, template creation, and import actions they were not authorized to perform. Additionally, relay authority was determined by matching editable user profile fields (name and email) rather than a protected, non-spoofable identifier. An ordinary user who modified their profile to match the expected bot name could be recognized as the trusted relay, enabling impersonation of the bot and potential access to its elevated privileges. Preconditions: - A valid Flowintel user account with a restricted role (e.g., Read Only) - Access to the Matrix relay integration or the ability to send API requests with the relay's API key and a MATRIX-ID header - For the impersonation vector: ability to edit one's own profile name fields Security impact: - Unauthorized write operations by users with read-only or otherwise restricted permissions - Potential impersonation of the trusted relay bot by ordinary users - Bypass of organization-level access controls and role-based restrictions - Unauthorized modification of cases, tasks, calendar events, templates, and user directory entries Affected versions: Flowintel prior to 4.1.0 |
| CVE-2026-133652 | High | 2026-11-20 | Not applicable | No public exploit | Flowintel , contained a session management vulnerability in its browser authentication mechanism. The session identifier used a bare numeric user ID rather than a credential-bound token, resulting in several related weaknesses: - Remembered logins (remember-me cookies) remained valid after a user changed their password, allowing an attacker holding a previously issued cookie to retain access indefinitely. - Server-side session identifiers were not rotated upon login (local, SSO, or remembered), enabling session fixation. - Self-service email and password changes did not require verification of the current password, permitting an attacker with an active session to modify account credentials without knowledge of the existing password. - Administrator-initiated password resets did not revoke other browser sessions, invalidate remembered logins, or rotate the affected user's API key. An attacker who obtained a valid session or remember-me cookie (e.g., through XSS, network interception, or cookie theft) could maintain unauthorized access even after the legitimate user changed their password. Additionally, an attacker with any valid session could change the account's email address or password without knowing the current credentials, effectively taking over the account. Affected versions: Flowintel prior to 4.1.0. |
| CVE-2026-133651 | Medium | 2026-11-20 | Not applicable | No public exploit | FlowIntel contained a Cross-Site Request Forgery (CSRF) vulnerability affecting fourteen web routes that performed destructive or state-changing operations. The affected routes accepted HTTP GET requests in addition to (or instead of) POST, which bypassed the Flask-WTF CSRF token validation that is only enforced on non-GET requests. The vulnerable operations included: - Case deletion and case merging - Organisation removal from a case - Task deletion (case and template) - Case template and note template deletion - Connector, connector instance, and icon deletion - Custom tag deletion and status change - Taxonomy and galaxy status changes An attacker who could induce an authenticated user to follow a crafted link or load a page containing a cross-site navigation (e.g., an image tag or redirect) could trigger any of these destructive actions using the victim's session cookie, without the victim's explicit consent or awareness. No special privileges beyond a valid authenticated session with the appropriate role (editor or admin) were required on the victim's account. Security impact: unauthorized deletion or modification of cases, tasks, templates, connectors, icons, custom tags, taxonomies, and galaxies belonging to the victim or the organisation, resulting in loss of data integrity. Affected versions: FlowIntel prior to 4.1.0 |
| CVE-2026-133648 | Critical | 2026-11-20 | Not applicable | No public exploit | Flowintel disabled TLS certificate verification for all MISP API connections and used unverified SSL contexts for IMAP and SMTP STARTTLS mail connections. This allowed an on-path (man-in-the-middle) attacker positioned between Flowintel and its MISP or mail servers to impersonate the remote server and intercept sensitive data. Affected connections include: - All MISP HTTPS API calls (event retrieval, attribute search, event creation, connectivity checks, and API validation) - SMTP STARTTLS connections used for sending email notifications - IMAP TLS connections used for fetching mail archives and testing connectivity An attacker who can observe or intercept network traffic between Flowintel and the MISP or mail server could: - Capture MISP API keys and mail credentials (SMTP/IMAP passwords) - Read all threat intelligence data exchanged (events, attributes, objects, reports) - Inject or modify threat intelligence data returned to Flowintel The vulnerability required no authentication on the part of the attacker and no user interaction; it was exploitable by any party with a network position between Flowintel and its configured MISP or mail endpoints. Affected versions: Flowintel prior to 4.1.0. |
| CVE-2026-133631 | High | 2026-11-20 | Not applicable | No public exploit | FlowIntel contains multiple security flaws in its note variable resolution, chatbot API tooling, and AI report generation. - Note variable references (e.g. cross-case or cross-task lookups) were resolved using the viewing user's privileges rather than the destination case's audience. An authenticated user with access to a shared or imported note could embed references to private cases, causing sensitive case data to be pulled into AI report requests, exports, and MISP sends without the referenced case's audience having granted read access. - The chatbot API tool permitted the language model to invoke any FlowIntel API endpoint, including administrative routes and state-changing GET operations, without an allow-list or path validation. An attacker who can influence the model's instructions (e.g. via untrusted case content) could induce data modification or access restricted endpoints. - AI report generation passed the Ollama bearer token and full case content as command-line arguments to a child process, exposing them in the system process table to any local user. Affected versions: FlowIntel prior to 4.1.0. |
| CVE-2026-133630 | Medium | 2026-11-20 | Not applicable | No public exploit | The flowintel Docker build workflow used the GitHub Actions checkout action with default credential persistence, causing the job authentication token to be written into the repository's Git configuration file. This file became part of the Docker build context and could be retained in exported build cache layers, even though Git metadata was stripped from the final runtime image. An attacker with access to the CI/CD build cache or build environment could extract the persisted token and use it to gain unauthorized access to the private source repository. Impact: - Exposure of a valid authentication token to the private repository - Potential unauthorized read access to source code and repository metadata Affected versions: flowintel < 4.1.0 |
| CVE-2026-133627 | Medium | 2026-11-20 | Not applicable | No public exploit | flowintel contains a log injection vulnerability in its case history (audit log) subsystem. The case history is stored as a line-delimited file where each line represents a single event attributed to a specific user. User-controlled fields, including user names, event messages, and case titles used during case merging, were written to the history file without sanitizing embedded line separator characters (such as carriage return, line feed, vertical tab, form feed, and Unicode line/paragraph separators). An authenticated user with the ability to create or modify case history entries could embed line separators in these fields. Upon writing, the injected separators would split a single intended entry into multiple lines, each of which the history format interprets as a distinct event. This allows an attacker to forge additional history entries attributed to arbitrary users, corrupting the audit trail and undermining the integrity of case records. The vulnerability affects the case history append and merge operations. No authentication bypass or privilege escalation is required beyond normal case-management access. Affected versions: flowintel prior to 4.1.0. |
| CVE-2026-133626 | High | 2026-11-20 | Not applicable | No public exploit | FlowIntel contains a resource exhaustion vulnerability in its file-to-note conversion feature. When a user converts an attached CSV or JSON file into a case note, the application renders the data as a Markdown table by padding every row to the maximum column count. A crafted file with a small number of filled cells but a very large number of columns (or keys) causes the application to allocate a quadratic number of padded table cells, potentially exhausting a worker process in memory or CPU. The same issue affects nested JSON values rendered inside table cells, where pretty-printed indentation further inflates the output size. Preconditions: - An authenticated user with access to a case in FlowIntel - Ability to attach and convert a CSV or JSON file to a note Impact: - Denial of service: exhaustion of a worker process, potentially disrupting service for other users - No confidentiality or integrity impact Affected versions: FlowIntel prior to 4.1.0 |
| CVE-2026-133625 | Medium | 2026-11-20 | Not applicable | No public exploit | iLBC audio codec crash in 4.6.0 to 4.6.9 and 4.4.0 to 4.4.19 allows denial of service |
| CVE-2026-133624 | Medium | 2026-11-20 | Not applicable | No public exploit | SCTP protocol dissector heap disclosure in 4.6.0 to 4.6.9 and 4.4.0 to 4.4.19 might enable denial of service or code execution |
| CVE-2026-133622 | Low | 2026-11-20 | Not applicable | No public exploit | A flaw was found in certmonger. This vulnerability allows a malicious certificate authority or an attacker positioned on an unencrypted network to cause a Denial of Service (DoS) by sending oversized or deliberately slow responses. Certmonger fails to enforce size limits or transfer timeouts when downloading and buffering Simple Certificate Enrollment Protocol (SCEP) replies over HTTP. Consequently, an attacker can exhaust host memory, drive CPU usage to capacity, or cause certificate requests to hang indefinitely. |
| CVE-2026-133620 | Medium | 2026-11-20 | Not applicable | No public exploit | Flowintel's template repository subsystem did not adequately constrain file access to the configured repository base directory. Two related weaknesses existed: - Repository registration and editing accepted arbitrary local paths without verifying they resolved inside the configured REPOSITORY_BASE_PATH, allowing an authenticated user to point a repository at any readable directory on the host. - Manifest and template file lookups used normalized (non-canonical) path joins and a startswith-based guard that could be bypassed by symbolic links, permitting reads of files outside the intended repository. An authenticated user with the ability to add or edit a template repository could therefore cause the application to read and return the contents of arbitrary files readable by the service account, including configuration files, credentials, or other sensitive data. Affected: Flowintel versions prior to 4.1.0. |
| CVE-2026-133615 | Medium | 2026-11-20 | Not applicable | No public exploit | A vulnerability has been identified in webauthn-kotlin versions 1.1.0 through 1.1.3, where an exported device-credential authentication activity launches attacker-supplied intents without validation, potentially allowing a malicious application on the same Android device to access application-protected data, depending on the host application’s content-provider configuration. |
| CVE-2026-133613 | Medium | 2026-11-20 | Not applicable | No public exploit | Flowintel's community data launcher script passes the admin API key as a command-line argument to a child Python helper process. On Unix-like systems, process arguments are readable by all local users via standard tools such as ps or by reading /proc/<pid>/cmdline, allowing any local user to observe the key while the helper process is running. An attacker with local access to the host can capture the admin API key during the brief window in which the helper process is active. Possession of the key grants full administrative access to the Flowintel REST API, enabling unauthorized creation, modification, or deletion of threat intelligence data, users, roles, and organisations. Preconditions: - The victim must invoke the community data import or deletion command (launch.sh -tdc or -dtdc) with the API key supplied as a positional argument. - The attacker must have a local user account on the same host and be able to observe process listings during the helper execution window. Impact: - Disclosure of the Flowintel admin API key to any local user. - Subsequent full administrative control over the Flowintel instance via its REST API. Affected: <4.1.0 |
| CVE-2026-133611 | Medium | 2026-11-20 | Not applicable | No public exploit | vulnerability-lookup prior to version 7.1.0 contains two security issues in its web interface. First, the /user/toggle_2fa endpoint accepted HTTP GET requests and disabled the authenticated user's two-factor authentication without requiring password confirmation. Because the state-changing operation was reachable via GET, an attacker with a basic account could embed an image element (or any other GET-triggering markup) in a comment pointing to that endpoint. When a victim with 2FA enabled viewed the comment, their browser silently issued the GET request, disabling the victim's second factor of authentication. No CSRF token was enforced on the GET path, and no password was required to confirm the action. Second, the comment detail page (/comment/<uuid>) rendered unpublished comments to any visitor who possessed the URL, bypassing the moderation workflow that was intended to keep such content hidden until approved. The API correctly restricted access, but the web view did not enforce the same authorization check. The combined effect allows an attacker to degrade a victim's account security (removal of 2FA) through a single page view and to read content that was not yet approved for public release. |
| CVE-2026-133606 | Medium | 2026-11-20 | Not applicable | No public exploit | A weakness has been identified in PowerJob up to 5.1.7. This affects the function CustomHttpServletRequestWrapper of the file powerjob-server/powerjob-server-starter/src/main/java/tech/powerjob/server/config/CachingRequestBodyFilter.java of the component CachingRequestBodyFilter. Executing a manipulation can lead to denial of service. It is possible to launch the attack remotely. |
| CVE-2026-133601 | Medium | 2026-11-20 | Not applicable | No public exploit | A vulnerability was found in hiparker opsli-boot up to 2.2.1. This affects the function getInputStream of the file opsli-plugins/opsli-plugins-waf/src/main/java/org/opsli/plugins/waf/servlet/WafHttpServletRequestWrapper.java of the component WAF Plugin. The manipulation results in denial of service. The attack can be executed remotely. |
| CVE-2026-133578 | Medium | 2026-11-20 | Not applicable | No public exploit | A vulnerability was detected in itsourcecode Banking Management System 1.0. This impacts an unknown function of the file manage_donation.php of the component Donor Management. The manipulation of the argument ID results in sql injection. The attack may be performed from remote. The exploit is now public and may be used. |
| CVE-2026-133577 | High | 2026-11-20 | Not applicable | No public exploit | A flaw was found in the Kuadrant WebAssembly (WASM) shim shipped in Red Hat Connectivity Link 1.5. When a TokenRateLimitPolicy is attached to an HTTPRoute that also has an AuthPolicy - or when a RateLimitPolicy with defaults or overrides is attached to the Gateway or listener of such routes - the shim's action pipeline fails to dispatch the authentication guard at request time, and the request is forwarded upstream. Unauthenticated requests return 200 OK instead of 401, and neither authentication nor rate limiting is enforced. Both policies continue to report Enforced, leaving no status-level indication of the failure. |
| CVE-2026-133561 | Medium | 2026-11-20 | Not applicable | No public exploit | Mattermost versions 11.2.x <= 11.2.4 fail to validate that the redirect target on the web app landing page that prompts users to open links in the desktop app stays on the Mattermost origin which allows an unauthenticated attacker to redirect a user to an arbitrary external site via a crafted link. Mattermost Advisory ID: MMSA-2026-00893 |
| CVE-2026-133553 | High | 2026-11-20 | Not applicable | No public exploit | A flaw was found in crun. When copying files onto a tmpfs mounted with tmpcopyup, crun opens the destination a second time by name. A container that shares a writable volume with the container being created can change that path between the two lookups, so crun copies image files onto host files, including files under /proc/sys. |
| CVE-2026-133537 | Medium | 2026-11-20 | No exploit published | No public exploit | A flaw was found in Keycloak. When evaluating access permissions, Keycloak Authorization Services improperly matches resource paths containing wildcard file extensions by evaluating only the file extension suffix and ignoring configured path prefixes. An authenticated remote attacker could exploit this vulnerability by requesting a restricted resource that shares a file extension with a more permissive resource, leading to an authorization bypass and unintended access to protected data. |
| CVE-2026-133536 | Medium | 2026-11-20 | No exploit published | No public exploit | A flaw was found in Keycloak. The OpenID Connect (OIDC) logout endpoint continues to honor post-logout redirect rules for disabled clients rather than rejecting the requests. If a disabled client retains permissive redirect configurations, a remote attacker can exploit this issue by supplying an arbitrary redirection target in a logout request, leading to an open redirect that can be used in phishing attacks. |
| CVE-2026-133535 | Medium | 2026-11-20 | No exploit published | No public exploit | A flaw was found in Hawtio. An authenticated remote attacker can cause a Denial of Service (DoS) by sending a specially crafted request URI to monitored endpoints. The FlightRecordingDownloadFacade servlet filter uses an inefficient regular expression pattern that causes catastrophic backtracking when processing certain long requests. This issue leads to excessive CPU utilization, causing handling threads to hang and degrading service availability. |
| CVE-2026-133534 | High | 2026-11-20 | Not applicable | No public exploit | PowerLink developed by Neotroni Lighting has a SQL Injection vulnerability, allowing unauthenticated remote attackers to inject arbitrary SQL commands to read database contents. |
| CVE-2026-133531 | Medium | 2026-11-20 | Not applicable | No public exploit | A flaw was found in cluster-network-operator. The OVN IPsec certificate signer does not verify that the requested certificate Subject and DNS names belong to the requesting node. An attacker with an accepted OVN node credential and permission to submit certificate signing requests could obtain a signed certificate identifying another node. In certificate authenticated OVN IPsec deployments, this could enable peer impersonation when the attacker can also satisfy the configured peer address check, potentially compromising protected traffic. |
| CVE-2026-133528 | Critical | 2026-11-20 | Not applicable | No public exploit | BeamNG.drive before 0.40.6 contains an out-of-bounds write vulnerability because JIT-compiled LuaJIT traces omit FFI array bounds checks, letting untrusted Lua escape the sandbox. Attackers supplying a malicious mod can JIT-compile an FFI store loop, write out of range using a tostring() address leak, re-enable ffi.load, and run commands as the game user. |
| CVE-2026-133521 | Medium | 2026-11-20 | Not applicable | No public exploit | Bar Assistant 3.0.0 before 6.11.0 contains an authorization bypass vulnerability in BarController::join that allows authenticated users to join bars without a valid invite code. Attackers can send POST requests to /api/bars/join omitting invite_code, matching invite-disabled bars with NULL codes, to read cocktails, ingredients, members, settings and search tokens. |
| CVE-2026-133520 | Medium | 2026-11-20 | Not applicable | No public exploit | Dokploy 0.28.0 before 0.31.1 contains a path traversal vulnerability in the patch.readRepoDirectories tRPC procedure that allows authenticated organization members to list tracked files of arbitrary git repositories. Attackers with service read permission can supply a crafted repoPath, which is passed to git ls-tree unconfined, to enumerate other organizations' application and compose source trees. |
| CVE-2026-133519 | Medium | 2026-11-20 | Not applicable | No public exploit | FFmpeg 7.0 through 9.0.2 contains an out-of-bounds read vulnerability in dvdvideo_menu_next_ps_block() in libavformat/dvdvideodec.c when demuxing DVD menu domains. Attackers can craft a DVD image whose last cell sector and NAV next-VOBU pointer bypass the end-of-cell check, overreading pgc->cell_playback and crashing the process. |
| CVE-2026-133505 | Medium | 2026-11-20 | Not applicable | No public exploit | When message history is serialized and loaded again, a tool result that contains a JSON object in the serialized shape of one of Pydantic AI's file types is rebuilt as that file. A third party who controls data a tool returns, such as a record that an MCP server or a function tool returns from an external system, can use this to make the application download a URL on its local network, or make the model provider read an s3:// object or uploaded file with the application's credentials. Applications are affected when tool results can contain third-party data, message history containing those results is serialized and loaded again (stored history, history a UI adapter holds on the server, or Temporal, DBOS or Prefect durable execution), and the model is one Pydantic AI downloads files for, one that honors force_download, or one whose provider resolves non-HTTP file URLs or uploaded files. History that a client submits through the Vercel AI or AG-UI adapter in the default mode is not affected. The issue is fixed in pydantic-ai and pydantic-ai-slim 1.107.10 and 2.66.0. |
| CVE-2026-133503 | Medium | 2026-11-20 | Not applicable | No public exploit | A security vulnerability has been detected in ModelCloud GPTQModel up to 7.6.0. Affected by this vulnerability is the function gptqmodel.adapter.remote.resolve_path of the file gptqmodel/adapter/remote.py of the component Adapter Resolution Pipeline. Such manipulation of the argument adapter.path leads to improper input validation. The attack may be launched remotely. The exploit has been disclosed publicly and may be used. Upgrading to version 7.7.0 addresses this issue. The name of the patch is ed99ac8d59940bf27bb24ce2e80002ae9e44469f. It is advisable to upgrade the affected component. |